MCP6402T-H/SN
- Mfr.Part #
- MCP6402T-H/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 3,312
- In Stock :
- 3,312
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Maximum Operating Temperature :
- + 125 C
- HTS Code :
- 8542.39.00.01
- Base Part Number :
- MCP6402
- Input Bias Current :
- 100 pA
- Slew Rate :
- 0.5V/μs
- Current - Input Bias :
- 1pA
- Mounting :
- Surface Mount
- JESD-609 Code :
- e3
- Minimum Operating Temperature :
- - 40 C
- Operating Temperature :
- -40°C~150°C
- Number of Channels :
- 2
- Common Mode Rejection Ratio :
- 56 dB
- Output Current :
- 15mA
- Maximum Operating Supply Voltage :
- 6 V
- RoHS Status :
- ROHS3 Compliant
- Length :
- 4.9mm
- Number of Elements :
- 2
- Voltage Gain-Min :
- 17780
- Terminal Pitch :
- 1.27 mm
- Terminal Form :
- Gull wing
- RoHS :
- Compliant
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Manufacturer :
- Microchip
- Number of Pins :
- 8
- Voltage - Input Offset :
- 800μV
- Number of Circuits :
- 2
- Product :
- Operational Amplifiers
- Amplifier Type :
- GENERAL PURPOSE
- Type :
- General Purpose Amplifier
- Peak Reflow Temperature (Cel) :
- 260
- Low-Bias :
- yes
- Supply Voltage :
- 1.8V
- Power Supplies :
- 2/5 V
- Qualification Status :
- Not Qualified
- Operating Supply Current :
- 45 uA
- Qualification :
- AEC-Q100
- Voltage Gain :
- 110dB
- Packaging :
- Tape and Reel (TR)
- Average Bias Current-Max (IIB) :
- 0.0001μA
- Supply Voltage Limit-Max :
- 7V
- Min Operating Temperature :
- -40 °C
- Number of Channels per Chip :
- 2
- Supplier Package :
- SOIC N
- Packing Method :
- Tape and Reel
- Mount :
- Surface Mount
- Supplier Device Package :
- 8-SOIC
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Product Category :
- Operational Amplifiers - Op Amps
- Current - Supply :
- 45µA
- Power Supply Rejection Ratio (PSRR) :
- 63dB
- Low-Offset :
- No
- Temperature Grade :
- Automotive
- Product Type :
- Op Amps - Operational Amplifiers
- Output Type :
- Rail-to-Rail
- Reach Compliance Code :
- Compliant
- Max Operating Temperature :
- 150 °C
- Bias Current-Max (IIB) @25C :
- 0.0001μA
- Base Product Number :
- MCP6402
- Gain Bandwidth Product :
- 1MHz
- Micropower :
- yes
- Max Supply Voltage :
- 6 V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Input Offset Voltage (Vos) :
- 4.5mV
- Seated Height-Max :
- 1.75 mm
- Current - Output / Channel :
- 15 mA
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Mounting Style :
- SMD/SMT
- Published :
- 2011
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Brand :
- Microchip Technology / Atmel
- Unity Gain BW-Nom :
- 1000 kHz
- Min Supply Voltage :
- 1.8 V
- Frequency Compensation :
- yes
- Number of Terminations :
- 8
- Screening Level :
- Extended
- Surface Mount :
- yes
- Architecture :
- VOLTAGE-FEEDBACK
- Series :
- --
- Package Shape :
- RECTANGULAR
- Width :
- 3.9 mm
- Output Current per Channel :
- 15 mA
- Nominal Supply Current :
- 45µA
- Product Status :
- Active
- Input Offset Voltage-Max :
- 4500 µV
- Shutdown :
- No Shutdown
- Number of Functions :
- 2
- Terminal Position :
- Dual
- Operating Supply Voltage :
- 8, 35 V
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Pin Count :
- 8
- JESD-30 Code :
- R-PDSO-G8
- Radiation Hardening :
- No
- Mounting Type :
- Surface Mount
- ECCN Code :
- EAR99
- Factory Lead Time :
- 2 Weeks
- Height Seated (Max) :
- 1.75mm
- Supply Current-Max :
- 0.18 mA
- Number of Terminals :
- 8
- Supply Type :
- Single
- Datasheets
- MCP6402T-H/SN

2 Channels 15 mA per Channel 1pA 56 dB Instrumentational OP Amps 0.0001μA 8, 35 V 1.8V~6V MCP6402 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6402T-H/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 1.8V battery. The op amp ic has an array of 8 pins on it. Op amp rates 4.5mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~150°C , which is a good operating temperature. Using an 45 uA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 110dB for the time being. A instrumentation amplifier like this has 2 circuits. On the buffer amps, there are 2 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 150 °C should not be used for the operation of buffer amplifier. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 8, 35 V. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a recommendation that this electrical part be used with a supply with 45µA current rating. This electric component can work from a voltage of under 6 V as far as supply voltage is concerned. A voltage of 1.8 V or higher is recommended for the linear amplifier's supply voltage. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 17780. 8 wire terminals are provided on this op amp.
MCP6402T-H/SN Features
8 Pins
supply voltage of 1.8V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6402T-H/SN Applications
There are a lot of Microchip Technology
MCP6402T-H/SN Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















