MCP633T-E/SN
- Mfr.Part #
- MCP633T-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 11,501
- In Stock :
- 11,501
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Published :
- 2009
- HTS Code :
- 8542.33.00.01
- Number of Channels :
- 1
- Shutdown :
- No Shutdown
- Pin Count :
- 8
- Max Operating Temperature :
- 125 °C
- Output Type :
- Rail-to-Rail
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Radiation Hardening :
- No
- Maximum Operating Temperature :
- + 125 C
- Amplifier Type :
- GENERAL PURPOSE
- ECCN Code :
- EAR99
- Number of Terminals :
- 8
- Frequency Compensation :
- yes
- Height :
- 1.25 mm (Min)
- Voltage Gain :
- 124dB
- JESD-30 Code :
- R-PDSO-G8
- Supplier Device Package :
- 8-SOIC
- Supply Current-Max :
- 3.6 mA
- Mounting Style :
- SMD/SMT
- Power Supplies :
- 3/5V
- Terminal Position :
- Dual
- Operating Temperature :
- -40°C~125°C
- Max Supply Voltage :
- 5.5 V
- Qualification Status :
- Not Qualified
- Terminal Pitch :
- 1.27 mm
- Base Product Number :
- MCP633
- Micropower :
- No
- Mounting Type :
- Surface Mount
- Supply Type :
- Single
- Terminal Form :
- Gull wing
- Number of Terminations :
- 8
- Package :
- Tape and Reel (TR)
- Current - Supply :
- 2.5mA
- Mounting :
- Surface Mount
- Supply Voltage :
- 2.5V
- Reach Compliance Code :
- Compliant
- Packaging :
- Tape and Reel (TR)
- Wideband :
- No
- Type :
- General Purpose Amplifier
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Common Mode Rejection Ratio :
- 63 dB
- Nominal Supply Current :
- 2.5mA
- Average Bias Current-Max (IIB) :
- 0.005μA
- Voltage - Input Offset :
- 1.8mV
- Output Current per Channel :
- 70 mA
- Number of Functions :
- 1
- Seated Height-Max :
- 1.75 mm
- Base Part Number :
- MCP633
- Package Shape :
- RECTANGULAR
- Operating Supply Current :
- 2.5 mA
- Input Bias Current :
- 4 pA
- Low-Bias :
- yes
- Maximum Operating Supply Voltage :
- 5.5 V
- Architecture :
- VOLTAGE-FEEDBACK
- Output Current :
- 70mA
- Voltage Gain-Min :
- 25100
- Programmable Power :
- No
- Minimum Operating Temperature :
- - 40 C
- Product Status :
- Active
- Product Type :
- Op Amps - Operational Amplifiers
- Brand :
- Microchip Technology
- Supply Voltage Limit-Max :
- 6.5V
- Input Offset Voltage (Vos) :
- 8mV
- Gain Bandwidth Product :
- 24MHz
- Input Offset Voltage-Max :
- 8000 µV
- Screening Level :
- Extended
- Peak Reflow Temperature (Cel) :
- 260
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Current - Input Bias :
- 4pA
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Qualification :
- AEC-Q100
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Number of Channels per Chip :
- 1
- Series :
- --
- Operating Supply Voltage :
- 5.5 V
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Width :
- 3.9 mm
- Factory Lead Time :
- 9 Weeks
- Power :
- No
- Number of Elements :
- 1
- Temperature Grade :
- Automotive
- Low-Offset :
- No
- Number of Pins :
- 8
- Manufacturer :
- Microchip
- Packing Method :
- Tape and Reel
- Voltage Gain dB :
- 124 dB
- RoHS Status :
- ROHS3 Compliant
- Mount :
- Surface Mount
- Number of Circuits :
- 1
- Slew Rate :
- 10V/μs
- Product Category :
- Operational Amplifiers - Op Amps
- Supplier Package :
- SOIC N
- JESD-609 Code :
- e3
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Min Supply Voltage :
- 2.5 V
- Unity Gain BW-Nom :
- 24000 kHz
- Length :
- 4.9mm
- Pbfree Code :
- yes
- Min Operating Temperature :
- -40 °C
- Product :
- Operational Amplifiers
- RoHS :
- Compliant
- Surface Mount :
- yes
- Datasheets
- MCP633T-E/SN

1 Channels 70 mA per Channel 4pA 63 dB Instrumentational OP Amps 0.005μA 5.5 V 2.5V~5.5V MCP633 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP633T-E/SN Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 8mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.5 mA and 10 . Maintain 124dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. Buffer op amp is equipped with 1 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is recommended that the temperature of this op amp ic should not fall below -40 °C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 125 °C degrees. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. As a result of this, the buffer amplifier is packed in TAPE AND REEL. This electronic part is recommended to be used with an 2.5mA supply for best performance. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 5.5 V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.5 V when using it. -- is the number that corresponds to the series of the buffer op amp. A minimum voltage gain of 25100 is the minimum voltage gain that this instrumentation amplifier is capable of producing. As part of this op amp ic, there are 8 terminals on which wires can be connected.
MCP633T-E/SN Features
8 Pins
supply voltage of 2.5V
124dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP633T-E/SN Applications
There are a lot of Microchip Technology
MCP633T-E/SN Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















