MCP632-E/SN
- Mfr.Part #
- MCP632-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8SOIC
- Stock
- 1
- In Stock :
- 1
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Output Current :
- 70mA
- Voltage Gain dB :
- 124 dB
- Mounting Style :
- SMD/SMT
- Gain :
- 124 dB
- Number of Channels :
- 2
- Height :
- 1.25mm
- Lead Free :
- Lead Free
- HTS Code :
- 8542.33.00.01
- Low-Bias :
- yes
- Supply Current-Max :
- 7.2 mA
- Surface Mount :
- yes
- Operating Supply Current :
- 2.5mA
- Gain Bandwidth Product :
- 24MHz
- Base Part Number :
- MCP632
- Mounting :
- Surface Mount
- Shut Down Support :
- No
- Common Mode Rejection Ratio :
- 63 dB
- Output Current per Channel :
- 70mA
- Product :
- Operational Amplifiers
- Power Supply Type :
- Single
- Shutdown :
- No Shutdown
- Reach Compliance Code :
- Compliant
- Amplifier Type :
- GENERAL PURPOSE
- Number of Pins :
- 8
- Terminal Position :
- Dual
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Peak Reflow Temperature (Cel) :
- 260
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Supply Voltage :
- 2.5V
- Power :
- No
- Length :
- 4.9mm
- Voltage - Input Offset :
- 1.8mV
- Terminal Pitch :
- 1.27 mm
- REACH SVHC :
- No SVHC
- Number of Terminals :
- 8
- Slew Rate :
- 10V/μs
- Operating Supply Voltage :
- 5.5, 1.8 V
- RoHS :
- Details
- Voltage Gain-Min :
- 25100
- Current - Supply :
- 2.5mA
- Brand :
- Microchip Technology
- Radiation Hardening :
- No
- Product Type :
- Op Amps - Operational Amplifiers
- Supplier Package :
- SOIC
- Number of Functions :
- 2
- Package Shape :
- RECTANGULAR
- Product Status :
- Active
- Number of Channels per Chip :
- 2
- Output Type :
- Rail-to-Rail
- Supply Voltage Limit-Max :
- 6.5V
- Maximum Operating Temperature :
- +125 °C
- Number of Circuits :
- 2
- Mount :
- Surface Mount
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Supplier Device Package :
- 8-SOIC
- Wideband :
- No
- Nominal Supply Current :
- 2.5mA
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Input Offset Voltage-Max :
- 8000 µV
- Temperature Grade :
- Automotive
- Number of Terminations :
- 8
- Series :
- --
- Factory Lead Time :
- 8 Weeks
- Micropower :
- No
- Programmable Power :
- No
- Pin Count :
- 8
- Terminal Form :
- Gull wing
- Base Product Number :
- MCP632
- Qualification Status :
- Not Qualified
- JESD-30 Code :
- R-PDSO-G8
- Package :
- Tube
- Average Bias Current-Max (IIB) :
- 0.005μA
- Unity Gain BW-Nom :
- 24000 kHz
- Rail to Rail :
- Rail to Rail Output
- Current - Input Bias :
- 4pA
- Operating Temperature :
- -40°C~125°C
- Qualification :
- AEC-Q100
- Supply Type :
- Single
- Product Category :
- Operational Amplifiers - Op Amps
- Screening Level :
- Extended
- Minimum Operating Temperature :
- -40 °C
- Published :
- 2000
- Package Type :
- SOIC
- Power Supplies :
- 3/5V
- Voltage Gain :
- 124dB
- Input Offset Voltage (Vos) :
- 8mV
- Dimensions :
- 4.9 x 3.9 x 1.25mm
- Maximum Operating Supply Voltage :
- 5.5 V
- Bandwidth :
- 24MHz
- Seated Height-Max :
- 1.75 mm
- Current - Output / Channel :
- 85 mA
- JESD-609 Code :
- e3
- ECCN Code :
- EAR99
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Width :
- 3.9mm
- Low-Offset :
- No
- Packaging :
- Tube
- Architecture :
- VOLTAGE-FEEDBACK
- Mounting Type :
- Surface Mount
- Manufacturer :
- Microchip
- Pbfree Code :
- yes
- RoHS Status :
- ROHS3 Compliant
- Type :
- General Purpose Amplifier
- Frequency Compensation :
- yes
- Datasheets
- MCP632-E/SN
MCP632-E/SN Documents

2 Channels 70mA per Channel 4pA 63 dB Instrumentational OP Amps 0.005μA 5.5, 1.8 V 2.5V~5.5V MCP632 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP632-E/SN Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 8mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.5mA and 10 . Maintain 124dB as the voltage gain. In total, there are 2 circuits on this buffer amplifier. Buffer op amp is equipped with 2 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 5.5, 1.8 V. This electronic part is recommended to be used with an 2.5mA supply for best performance. -- is the number that corresponds to the series of the buffer op amp. A minimum voltage gain of 25100 is the minimum voltage gain that this instrumentation amplifier is capable of producing. As part of this op amp ic, there are 8 terminals on which wires can be connected.
MCP632-E/SN Features
8 Pins
supply voltage of 2.5V
124dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP632-E/SN Applications
There are a lot of Microchip Technology
MCP632-E/SN Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















