MCP631T-E/SN
- Mfr.Part #
- MCP631T-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 27,478
- In Stock :
- 27,478
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Terminals :
- 8
- Operating Supply Voltage :
- 5.5 V
- Pin Count :
- 8
- Current - Input Bias :
- 4pA
- Radiation Hardening :
- No
- RoHS :
- Details
- Time@Peak Reflow Temperature-Max (s) :
- 40
- JESD-609 Code :
- e3
- Voltage - Input Offset :
- 1.8mV
- Mounting Style :
- SMD/SMT
- Series :
- --
- Brand :
- Microchip Technology
- Terminal Position :
- Dual
- Supply Current-Max :
- 3.6 mA
- JESD-30 Code :
- R-PDSO-G8
- Programmable Power :
- No
- Supplier Device Package :
- 8-SOIC
- Terminal Pitch :
- 1.27 mm
- Qualification Status :
- Not Qualified
- RoHS Status :
- ROHS3 Compliant
- Width :
- 3.9 mm
- ECCN Code :
- EAR99
- Number of Functions :
- 1
- Number of Channels per Chip :
- 1
- Input Offset Voltage-Max :
- 8000 µV
- Slew Rate :
- 10V/μs
- Voltage Gain dB :
- 124 dB
- Power Supplies :
- 3/5V
- Supply Voltage Limit-Max :
- 6.5V
- Screening Level :
- Extended
- Height :
- 1.25 mm (Min)
- Unity Gain BW-Nom :
- 24000 kHz
- Maximum Operating Temperature :
- + 125 C
- Product Status :
- Active
- Terminal Form :
- Gull wing
- Mounting :
- Surface Mount
- Output Type :
- Rail-to-Rail
- Qualification :
- AEC-Q100
- Reach Compliance Code :
- Compliant
- Supplier Package :
- SOIC N
- HTS Code :
- 8542.33.00.01
- Product Category :
- Operational Amplifiers - Op Amps
- Voltage Gain-Min :
- 25100
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Factory Lead Time :
- 10 Weeks
- Output Current per Channel :
- 70 mA
- Base Part Number :
- MCP631
- Product Type :
- Op Amps - Operational Amplifiers
- Length :
- 4.9mm
- Low-Bias :
- yes
- Voltage Gain :
- 124dB
- Peak Reflow Temperature (Cel) :
- 260
- Operating Supply Current :
- 2.5 mA
- Base Product Number :
- MCP631
- Micropower :
- No
- Published :
- 2009
- Number of Terminations :
- 8
- Average Bias Current-Max (IIB) :
- 0.005μA
- Common Mode Rejection Ratio :
- 63 dB
- Package :
- Tape and Reel (TR)
- Mount :
- Surface Mount
- Number of Pins :
- 8
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Product :
- Operational Amplifiers
- Type :
- General Purpose Amplifier
- Wideband :
- No
- Pbfree Code :
- yes
- Architecture :
- VOLTAGE-FEEDBACK
- Gain Bandwidth Product :
- 24MHz
- Current - Supply :
- 2.5mA
- Power :
- No
- Supply Type :
- Single
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Low-Offset :
- No
- Shutdown :
- No Shutdown
- Number of Channels :
- 1 Channel
- Operating Temperature :
- -40°C~125°C
- Temperature Grade :
- Automotive
- Manufacturer :
- Microchip
- Minimum Operating Temperature :
- - 40 C
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Number of Circuits :
- 1
- Packaging :
- Tape and Reel (TR)
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Nominal Supply Current :
- 2.5mA
- Number of Elements :
- 1
- Amplifier Type :
- GENERAL PURPOSE
- Surface Mount :
- yes
- Package Shape :
- RECTANGULAR
- Output Current :
- 70mA
- Mounting Type :
- Surface Mount
- Packing Method :
- Tape and Reel
- Supply Voltage :
- 2.5V
- Common-mode Reject Ratio-Min :
- 63 dB
- Frequency Compensation :
- yes
- Seated Height-Max :
- 1.75 mm
- Input Offset Voltage (Vos) :
- 8mV
- Datasheets
- MCP631T-E/SN

1 Channel Channels 70 mA per Channel 4pA 63 dB Instrumentational OP Amps 0.005μA 5.5 V 2.5V~5.5V MCP631 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP631T-E/SN Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 8mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.5 mA and 10 . Maintain 124dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. Buffer op amp is equipped with 1 Channel channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. As a result of this, the buffer amplifier is packed in TAPE AND REEL. This electronic part is recommended to be used with an 2.5mA supply for best performance. -- is the number that corresponds to the series of the buffer op amp. A minimum voltage gain of 25100 is the minimum voltage gain that this instrumentation amplifier is capable of producing. As part of this op amp ic, there are 8 terminals on which wires can be connected.
MCP631T-E/SN Features
8 Pins
supply voltage of 2.5V
124dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP631T-E/SN Applications
There are a lot of Microchip Technology
MCP631T-E/SN Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















