MCP631-E/SN
- Mfr.Part #
- MCP631-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 745
- In Stock :
- 745
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Rad Hardened :
- No
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Shut Down Feature :
- No
- Gain Bandwidth Product :
- 24MHz
- Type :
- General Purpose Amplifier
- Lead Free :
- Lead Free
- Voltage Gain dB :
- 124 dB
- Slew Rate :
- 10V/μs
- Voltage Gain :
- 124dB
- Bandwidth :
- 24MHz
- Length :
- 4.8768mm
- Mount :
- Surface Mount
- Low-Offset :
- No
- Gain :
- 124 dB
- Number of Elements :
- 1
- Architecture :
- VOLTAGE-FEEDBACK
- Time@Peak Reflow Temperature-Max (s) :
- 40
- JESD-609 Code :
- e3
- Published :
- 2000
- Average Bias Current-Max (IIB) :
- 0.005μA
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Power Supply Rejection Ratio :
- 61(dB)
- Number of Terminations :
- 8
- Terminal Form :
- Gull wing
- Power Supplies :
- 3/5V
- Width :
- 3.9116mm
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Unity Gain BW-Nom :
- 24000 kHz
- Brand :
- Microchip Technology
- Supply Voltage :
- 2.5V
- Manufacturer :
- Microchip
- Pin Count :
- 8
- Number of Channels per Chip :
- 1
- Qualification :
- AEC-Q100
- Single Supply Voltage (Typ) :
- 3/5(V)
- Product Type :
- Op Amps - Operational Amplifiers
- Operating Temp Range :
- -40C to 125C
- Product Status :
- Active
- Radiation Hardening :
- No
- Output Current :
- 70mA
- Package Type :
- SOIC N
- Dual Supply Voltage (Max) :
- Not Required(V)
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Voltage - Input Offset :
- 1.8mV
- Operating Temperature Classification :
- Automotive
- Packaging :
- Tube
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Input Offset Voltage (Vos) :
- 8mV
- Supplier Device Package :
- 8-SOIC
- Nominal Supply Current :
- 2.5mA
- Supply Type :
- Single
- Base Product Number :
- MCP631
- Frequency Compensation :
- yes
- ECCN Code :
- EAR99
- Single Supply Voltage (Max) :
- 5.5(V)
- Number of Pins :
- 8
- Input Offset Voltage :
- (mV)
- Single Supply Voltage (Min) :
- 2.5(V)
- Operating Supply Voltage :
- 5.5 V
- Product :
- Operational Amplifiers
- Low-Bias :
- yes
- Pbfree Code :
- yes
- Operating Temperature :
- -40°C~125°C
- Voltage Gain in dB :
- 124(dB)
- Current - Input Bias :
- 4pA
- REACH SVHC :
- No SVHC
- Number of Channels :
- 1
- Product Category :
- Operational Amplifiers - Op Amps
- Micropower :
- No
- Mounting :
- Surface Mount
- Minimum Operating Temperature :
- - 40 C
- Maximum Operating Temperature :
- + 125 C
- Current - Supply :
- 2.5mA
- Number of Functions :
- 1
- Peak Reflow Temperature (Cel) :
- 260
- Output Type :
- Rail-to-Rail
- Power Supply Requirement :
- Single
- RoHS :
- Details
- Factory Lead Time :
- 9 Weeks
- Terminal Position :
- Dual
- Mounting Style :
- SMD/SMT
- Amplifier Type :
- GENERAL PURPOSE
- Number of Circuits :
- 1
- Operating Supply Current :
- 2.5 mA
- RoHS Status :
- ROHS3 Compliant
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Supplier Package :
- SOIC N
- Programmable Power :
- No
- Package :
- Tube
- Series :
- --
- Screening Level :
- Extended
- Shutdown :
- No Shutdown
- Rail/Rail I/O Type :
- Rail to Rail Output
- Dual Supply Voltage (Min) :
- Not Required(V)
- Unity Gain Bandwidth Product :
- 24
- Height :
- 1.2446mm
- Input Bias Current :
- 0.004(nA)
- Common Mode Rejection Ratio :
- 63 dB
- Output Current per Channel :
- 70 mA
- Base Part Number :
- MCP631
- Mounting Type :
- Surface Mount
- Supply Voltage Limit-Max :
- 6.5V
- Datasheets
- MCP631-E/SN

1 Channels 70 mA per Channel 4pA 63 dB Instrumentational OP Amps 0.005μA 5.5 V 2.5V~5.5V MCP631 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP631-E/SN Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 2.5V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 8mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 2.5 mA, this op amp ic can operate. 124dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. As far as the device is concerned, buffer amplifier has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The linear amplifier consists of 1 different elements in total. The operating supply voltage of the buffer op amp is rated at 5.5 V. As a result, it is recommended that a power supply of 2.5mA be used with this electronic part. As the name implies, -- refers to the series of the buffer op amp.
MCP631-E/SN Features
8 Pins
supply voltage of 2.5V
124dB voltage gain
Output Type: Rail-to-Rail
MCP631-E/SN Applications
There are a lot of Microchip Technology
MCP631-E/SN Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















