MCP6295T-E/MS
- Mfr.Part #
- MCP6295T-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8MSOP
- Stock
- 2,512
- In Stock :
- 2,512
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Height Seated (Max) :
- 1.1mm
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Supply Current-Max :
- 2.6 mA
- Peak Reflow Temperature (Cel) :
- 260
- Voltage Gain-Min :
- 31620
- Low-Bias :
- yes
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Operating Temperature :
- -40°C~125°C
- Output Current per Channel :
- 25 mA
- Factory Lead Time :
- 20 Weeks
- Shutdown :
- No Shutdown
- Screening Level :
- Extended Industrial
- Manufacturer :
- Microchip
- Unity Gain BW-Nom :
- 10000 kHz
- Voltage Gain dB :
- 110 dB
- Type :
- General Purpose Amplifier
- Slew Rate :
- 7V/µs
- Number of Circuits :
- 2
- Product Status :
- Active
- Product Category :
- Operational Amplifiers - Op Amps
- Number of Channels per Chip :
- 2
- Mounting :
- Surface Mount
- Terminal Finish :
- Matte Tin (Sn)
- Amplifier Type :
- GENERAL PURPOSE
- RoHS Status :
- ROHS3 Compliant
- Current - Output / Channel :
- 25mA
- Temperature Grade :
- Automotive
- Product Type :
- Op Amps - Operational Amplifiers
- Number of Elements :
- 2
- Number of Pins :
- 8
- Wideband :
- No
- Minimum Operating Temperature :
- - 40 C
- Terminal Form :
- Gull wing
- Nominal Supply Current :
- 1mA
- Maximum Operating Supply Voltage :
- 5.5 V
- Low-Offset :
- No
- Voltage Gain :
- 110dB
- Voltage - Input Offset :
- 3mV
- Mounting Style :
- SMD/SMT
- Output Current :
- 25mA
- Terminal Position :
- Dual
- Seated Height-Max :
- 1.1 mm
- Radiation Hardening :
- No
- Package Shape :
- Square
- Brand :
- Microchip Technology
- Mount :
- Surface Mount
- Current - Input Bias :
- 1pA
- Input Offset Voltage (Vos) :
- 3mV
- Terminal Pitch :
- 0.65mm
- ECCN Code :
- EAR99
- Base Product Number :
- MCP6295
- Number of Terminals :
- 8
- Gain Bandwidth Product :
- 10MHz
- HTS Code :
- 8542.33.00.01
- Number of Terminations :
- 8
- Supplier Package :
- MSOP
- Current - Supply :
- 1mA
- Max Supply Voltage :
- 5.5 V
- Product :
- Operational Amplifiers
- Input Offset Voltage-Max :
- 5000 µV
- Maximum Operating Temperature :
- + 125 C
- Programmable Power :
- No
- Pbfree Code :
- yes
- Width :
- 3 mm
- Packaging :
- Tape and Reel (TR)
- Supply Voltage Limit-Max :
- 7V
- JESD-30 Code :
- S-PDSO-G8
- Number of Channels :
- 2 Channel
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Qualification :
- AEC-Q100
- Power Supplies :
- 2.5/5 V
- Operating Supply Current :
- 1 mA
- Number of Functions :
- 2
- Operating Supply Voltage :
- 5.5 V
- Lead Free :
- Lead Free
- Output Type :
- Rail-to-Rail
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Reach Compliance Code :
- Compliant
- Voltage - Supply, Single/Dual (±) :
- 2.4V~6V
- Micropower :
- No
- Supply Type :
- Single
- Power :
- No
- Supplier Device Package :
- 8-MSOP
- Average Bias Current-Max (IIB) :
- 0.005μA
- Frequency Compensation :
- yes
- Surface Mount :
- yes
- RoHS :
- Details
- Qualification Status :
- Not Qualified
- Supply Voltage :
- 5V
- Min Supply Voltage :
- 2.4 V
- Min Operating Temperature :
- -40 °C
- Height :
- 0.85 mm
- Base Part Number :
- MCP6295
- Input Bias Current :
- 1 pA
- Common Mode Rejection Ratio :
- 70 dB
- Max Operating Temperature :
- 125 °C
- Series :
- --
- Pin Count :
- 8
- Published :
- 2007
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Architecture :
- VOLTAGE-FEEDBACK
- JESD-609 Code :
- e3
- Mounting Type :
- Surface Mount
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Length :
- 3mm
- Datasheets
- MCP6295T-E/MS

2 Channel Channels 25 mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 2.4V~6V MCP6295 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6295T-E/MS Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 1 mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 2 circuits that are connected together. There are 2 Channel channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than -40 °C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 125 °C. There are a total of 2 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. As a recommendation, this electronic component should be used with a power supply that can deliver 1mA. I would like to point out that this electrical component is capable of working from a voltage below 5.5 V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.4 V at all times. The -- indicates the series number of the op amp. There is a minimum voltage gain of 31620 that this buffer op amp is capable of conducting. In order to connect the buffer amplifier to the wires, it is equipped with 8 terminals.
MCP6295T-E/MS Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6295T-E/MS Applications
There are a lot of Microchip Technology
MCP6295T-E/MS Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















