MCP6293T-E/SN
- Mfr.Part #
- MCP6293T-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 31,399
- In Stock :
- 31,399
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Height :
- 1.25 mm (Min)
- Number of Terminations :
- 8
- Output Current :
- 25mA
- Wideband :
- No
- Pbfree Code :
- yes
- Input Bias Current :
- 1 pA
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Common Mode Rejection Ratio :
- 70 dB
- Length :
- 4.9mm
- Output Type :
- Rail-to-Rail
- Maximum Operating Supply Voltage :
- 5.5 V
- Output Current per Channel :
- 25mA
- Terminal Form :
- Gull wing
- Slew Rate :
- 7V/µs
- Supply Voltage :
- 5V
- Supplier Device Package :
- 8-SOIC
- Gain Bandwidth Product :
- 10MHz
- JESD-30 Code :
- R-PDSO-G8
- Input Offset Voltage (Vos) :
- 3mV
- Base Product Number :
- MCP6293
- Width :
- 3.9 mm
- Lead Free :
- Lead Free
- Low-Offset :
- No
- Qualification Status :
- Not Qualified
- Reach Compliance Code :
- Compliant
- Pin Count :
- 8
- Voltage Gain :
- 110dB
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Voltage - Input Offset :
- 3mV
- Programmable Power :
- No
- Number of Pins :
- 8
- Unity Gain BW-Nom :
- 10000 kHz
- Terminal Position :
- Dual
- Qualification :
- AEC-Q100
- Product Type :
- Op Amps - Operational Amplifiers
- Packaging :
- Tape and Reel (TR)
- Min Supply Voltage :
- 2.4 V
- Number of Circuits :
- 1
- Number of Channels :
- 1 Channel
- Base Part Number :
- MCP6293
- Mounting :
- Surface Mount
- Operating Supply Voltage :
- 5.5 V
- Current - Input Bias :
- 1pA
- Mount :
- Surface Mount
- Number of Channels per Chip :
- 1
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Max Supply Voltage :
- 5.5 V
- Current - Output / Channel :
- 25mA
- Shutdown :
- No Shutdown
- Product Category :
- Operational Amplifiers - Op Amps
- Supply Current-Max :
- 1.3 mA
- Frequency Compensation :
- yes
- Product Status :
- Active
- Surface Mount :
- yes
- Terminal Pitch :
- 1.27 mm
- JESD-609 Code :
- e3
- Current - Supply :
- 1mA
- Architecture :
- VOLTAGE-FEEDBACK
- Number of Terminals :
- 8
- Maximum Operating Temperature :
- + 125 C
- Voltage - Supply, Single/Dual (±) :
- 2.4V~6V
- Series :
- --
- Peak Reflow Temperature (Cel) :
- 260
- HTS Code :
- 8542.33.00.01
- Radiation Hardening :
- No
- Power :
- No
- Package :
- Tape and Reel (TR)
- Average Bias Current-Max (IIB) :
- 0.005μA
- Factory Lead Time :
- 10 Weeks
- Screening Level :
- Extended Industrial
- Brand :
- Microchip Technology
- Published :
- 2007
- Micropower :
- No
- Low-Bias :
- yes
- Manufacturer :
- Microchip
- Number of Functions :
- 1
- Number of Elements :
- 1
- Power Supplies :
- 2.5/5V
- Type :
- General Purpose Amplifier
- Package Shape :
- RECTANGULAR
- Supplier Package :
- SOIC N
- ECCN Code :
- EAR99
- Max Operating Temperature :
- 125 °C
- Supply Voltage Limit-Max :
- 7V
- Mounting Type :
- Surface Mount
- RoHS :
- Details
- Terminal Finish :
- Matte Tin (Sn)
- Packing Method :
- Tape and Reel
- Minimum Operating Temperature :
- - 40 C
- Seated Height-Max :
- 1.75 mm
- Voltage Gain dB :
- 110 dB
- Mounting Style :
- SMD/SMT
- Operating Temperature :
- -40°C~125°C
- Amplifier Type :
- GENERAL PURPOSE
- Nominal Supply Current :
- 1mA
- Min Operating Temperature :
- -40 °C
- Voltage Gain-Min :
- 31620
- Temperature Grade :
- Automotive
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Input Offset Voltage-Max :
- 5000 µV
- Operating Supply Current :
- 1mA
- RoHS Status :
- ROHS3 Compliant
- Product :
- Operational Amplifiers
- Supply Type :
- Single
- Datasheets
- MCP6293T-E/SN
MCP6293T-E/SN Documents

1 Channel Channels 25mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 2.4V~6V MCP6293 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6293T-E/SN Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 5V. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 3mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. This op amp can operate from a supply current at 1mA. Voltage gain should remain at 110dB. There are 1 circuits on this op amp. The op amp ic has 1 Channel channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The temperature should not be lower than -40 °C for operational amplifier ics to operate. Use op amps only at temperatures no higher than 125 °C. This linear amplifier has a total of 1 elements. The operating supply voltage of the buffer op amp is rated at 5.5 V. TAPE AND REEL is adopted to pack the instrumentation amplifier. It is recommended that this electronic component be used with an 1mA supply. With regard to the supply voltage, this electrical component is capable of working from under 5.5 V. It is advised to keep the op amp's supply voltage higher than 2.4 V. -- corresponds to the op amp's series. The minimum voltage gain this buffer op amp is able to conduct is 31620. This buffer amplifier is equipped with terminals for wires.
MCP6293T-E/SN Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6293T-E/SN Applications
There are a lot of Microchip Technology
MCP6293T-E/SN Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















