MCP6293-E/SN
- Mfr.Part #
- MCP6293-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 6,992
- In Stock :
- 6,992
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Unity Gain BW-Nom :
- 10000 kHz
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Height :
- 1.25mm
- Number of Pins :
- 8
- Voltage Gain :
- 110dB
- Supplier Package :
- SOIC N
- Programmable Power :
- No
- REACH SVHC :
- No SVHC
- Product :
- Operational Amplifiers
- Mounting Style :
- SMD/SMT
- Voltage Gain dB :
- 110 dB
- Product Category :
- Operational Amplifiers - Op Amps
- Lead Free :
- Lead Free
- Terminal Position :
- Dual
- Series :
- --
- Type :
- General Purpose Amplifier
- Slew Rate :
- 7V/µs
- Operating Supply Current :
- 1mA
- Base Product Number :
- MCP6293
- RoHS Status :
- ROHS3 Compliant
- Number of Elements :
- 1
- Rail to Rail :
- Rail to Rail Input/Output
- Low-Offset :
- No
- Output Current :
- 25mA
- Pin Count :
- 8
- Bandwidth :
- 10 MHz
- Input Offset Voltage (Vos) :
- 3mV
- Package Shape :
- RECTANGULAR
- Screening Level :
- Extended Industrial
- Power Supplies :
- 2.5/5V
- Dimensions :
- 4.9 x 3.9 x 1.25mm
- Supply Voltage :
- 5V
- Current - Supply :
- 1mA
- Qualification Status :
- Not Qualified
- Product Type :
- Op Amps - Operational Amplifiers
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Supply Type :
- Single
- Input Offset Voltage-Max :
- 5000 µV
- Voltage - Supply, Single/Dual (±) :
- 2.4V~6V
- Min Operating Temperature :
- -40 °C
- Reach Compliance Code :
- Compliant
- Qualification :
- AEC-Q100
- Current - Output / Channel :
- 25mA
- Number of Amplifiers :
- 1
- Common Mode Rejection Ratio :
- 70 dB
- Nominal Supply Current :
- 1mA
- Manufacturer :
- Microchip
- Power :
- No
- Maximum Operating Supply Voltage :
- 5.5 V
- Package :
- Tube
- Mount :
- Surface Mount
- Wideband :
- No
- Published :
- 2016
- Package Type :
- SOIC
- Operating Temperature :
- -40°C~125°C
- Radiation Hardening :
- No
- Output Current per Channel :
- 25mA
- Low-Bias :
- yes
- Surface Mount :
- yes
- Amplifier Type :
- GENERAL PURPOSE
- Output Type :
- Rail-to-Rail
- Mounting :
- Surface Mount
- Max Supply Voltage :
- 5.5 V
- Peak Reflow Temperature (Cel) :
- 260
- Terminal Form :
- Gull wing
- Brand :
- Microchip Technology
- Number of Circuits :
- 1
- Current - Input Bias :
- 1pA
- Terminal Finish :
- Matte Tin (Sn)
- Length :
- 4.9mm
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Supply Voltage Limit-Max :
- 7V
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- JESD-609 Code :
- e3
- Max Operating Temperature :
- 125 °C
- Gain Bandwidth Product :
- 10MHz
- Voltage Gain-Min :
- 31620
- Power Supply Type :
- Single
- HTS Code :
- 8542.33.00.01
- ECCN Code :
- EAR99
- Temperature Grade :
- Automotive
- Terminal Pitch :
- 1.27 mm
- Mounting Type :
- Surface Mount
- Supply Current-Max :
- 1.3 mA
- Pbfree Code :
- yes
- Shutdown :
- No Shutdown
- Packaging :
- Tube
- Seated Height-Max :
- 1.75 mm
- Number of Channels per Chip :
- 1
- Shut Down Support :
- No
- Width :
- 3.9mm
- Input Bias Current :
- 1 pA
- RoHS :
- Details
- Minimum Operating Temperature :
- -40 °C
- Base Part Number :
- MCP6293
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Min Supply Voltage :
- 2.4 V
- Micropower :
- No
- Number of Terminals :
- 8
- Supplier Device Package :
- 8-SOIC
- Architecture :
- VOLTAGE-FEEDBACK
- Maximum Operating Temperature :
- +125 °C
- Number of Channels :
- 1
- Frequency Compensation :
- yes
- Average Bias Current-Max (IIB) :
- 0.005μA
- Operating Supply Voltage :
- 5.5 V
- Voltage - Input Offset :
- 3mV
- Factory Lead Time :
- 10 Weeks
- Number of Terminations :
- 8
- JESD-30 Code :
- R-PDSO-G8
- Product Status :
- Active
- Number of Functions :
- 1
- Datasheets
- MCP6293-E/SN
MCP6293-E/SN Documents

1 Channels 25mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 2.4V~6V MCP6293 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6293-E/SN Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 1mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 1 circuits that are connected together. There are 1 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than -40 °C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 125 °C. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. As a recommendation, this electronic component should be used with a power supply that can deliver 1mA. I would like to point out that this electrical component is capable of working from a voltage below 5.5 V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.4 V at all times. The -- indicates the series number of the op amp. There is a minimum voltage gain of 31620 that this buffer op amp is capable of conducting. In total, there are 1 op amps on the device. In order to connect the buffer amplifier to the wires, it is equipped with 8 terminals.
MCP6293-E/SN Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6293-E/SN Applications
There are a lot of Microchip Technology
MCP6293-E/SN Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















