MCP6292-E/SN
- Mfr.Part #
- MCP6292-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 20,761
- In Stock :
- 20,761
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Packaging :
- Tube
- Nominal Supply Current :
- 1mA
- Seated Height-Max :
- 1.75 mm
- MSL :
- MSL 1 - Unlimited
- Package Shape :
- RECTANGULAR
- Single Supply Voltage (Typ) :
- 3/5(V)
- Low-Bias :
- yes
- Series :
- --
- Shutdown :
- No Shutdown
- Supply Current-Max :
- 2.6 mA
- Output Current :
- 25mA
- Supply Type :
- Single
- Width :
- 3.9mm
- Input Voltage Range :
- 2.4 → 6 V
- Radiation Hardening :
- No
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Bandwidth :
- 10MHz
- Voltage Gain in dB :
- 110(dB)
- Voltage - Supply, Single/Dual (±) :
- 2.4V~6V
- Unity Gain Bandwidth Product :
- 10
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Peak Reflow Temperature (Cel) :
- 260
- Unity Gain BW-Nom :
- 10000 kHz
- Type :
- General Purpose Amplifier
- Max Operating Temperature :
- 125 °C
- Shut Down Feature :
- No
- JESD-609 Code :
- e3
- Output Current per Channel :
- 25mA
- Number of Pins :
- 8
- Product :
- Operational Amplifiers
- Number of Terminations :
- 8
- JESD-30 Code :
- R-PDSO-G8
- Minimum Operating Temperature :
- -40 °C
- REACH SVHC :
- No SVHC
- Package :
- Tube
- Average Bias Current-Max (IIB) :
- 0.005μA
- Low-Offset :
- No
- Supply Voltage :
- 5V
- Number of Channels :
- 2
- Operating Temperature :
- -40°C~125°C
- Manufacturer :
- Microchip
- Input Offset Voltage :
- 3(mV)
- Number of Circuits :
- 2
- Temperature Grade :
- Automotive
- Voltage Gain-Min :
- 31620
- Single Supply Voltage (Max) :
- 6(V)
- Qualification :
- AEC-Q100
- Dimensions :
- 4.9 x 3.9 x 1.5mm
- Mount :
- Surface Mount
- Number of Amplifiers :
- 2
- Frequency Compensation :
- yes
- Lead Free :
- Lead Free
- Product Type :
- Op Amps - Operational Amplifiers
- Single Supply Voltage (Min) :
- 2.4(V)
- Factory Lead Time :
- 10 Weeks
- Pin Count :
- 8
- Current - Input Bias :
- 1pA
- Brand :
- Microchip Technology / Atmel
- Schedule B :
- 8542330000, 8542330000/8542330000/8542330000/8542330000/8542330000
- Power Supply Requirement :
- Single
- Reach Compliance Code :
- Compliant
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Power Supplies :
- 2.5/5 V
- Maximum Operating Temperature :
- +125 °C
- Supply Voltage Limit-Max :
- 7V
- Mounting Type :
- Surface Mount
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Operating Supply Voltage :
- 3.6, 2.7, 3 V
- Supplier Device Package :
- 8-SOIC
- Rail to Rail :
- Rail to Rail Input/Output
- Min Supply Voltage :
- 2.4 V
- Operating Temp Range :
- -40C to 125C
- Base Part Number :
- MCP6292
- Terminal Position :
- Dual
- Number of Functions :
- 2
- Height :
- 1.25mm
- Input Offset Voltage-Max :
- 5000 µV
- Mounting Style :
- SMD/SMT
- Surface Mount :
- yes
- Programmable Power :
- No
- Input Offset Voltage (Vos) :
- 3mV
- Base Product Number :
- MCP6292
- RoHS :
- Details
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Current - Supply :
- 1mA
- ECCN Code :
- EAR99
- Voltage - Input Offset :
- 3mV
- Output Type :
- Rail-to-Rail
- Voltage Gain :
- 110dB
- RoHS Status :
- ROHS3 Compliant
- Number of Terminals :
- 8
- Maximum Input Voltage :
- 6 V
- Operating Supply Current :
- 1mA
- Amplifier Type :
- GENERAL PURPOSE
- Rad Hardened :
- No
- HTS Code :
- 8542.33.00.01
- Input Bias Current :
- 0.001(nA)
- Power Supply Rejection Ratio :
- 70(dB)
- Length :
- 4.9mm
- Operating Temperature Classification :
- Automotive
- Power Supply Type :
- Single
- Mounting :
- Surface Mount
- Terminal Form :
- Gull wing
- Product Category :
- Operational Amplifiers - Op Amps
- Published :
- 2000
- Terminal Pitch :
- 1.27 mm
- Micropower :
- No
- Shut Down Support :
- No
- Max Supply Voltage :
- 5.5 V
- Qualification Status :
- Not Qualified
- Dual Supply Voltage (Min) :
- Not Required(V)
- Maximum Operating Supply Voltage :
- 5.5 V
- Slew Rate :
- 7V/µs
- Common Mode Rejection Ratio :
- 70 dB
- Wideband :
- No
- Min Operating Temperature :
- -40 °C
- Current - Output / Channel :
- 25mA
- Dual Supply Voltage (Max) :
- Not Required(V)
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Product Status :
- Active
- Package Type :
- SOIC N
- Power :
- No
- Number of Elements :
- 2
- Number of Channels per Chip :
- 2
- Screening Level :
- Extended Industrial
- Gain Bandwidth Product :
- 10MHz
- Terminal Finish :
- Matte Tin (Sn)
- Pbfree Code :
- yes
- Voltage Gain dB :
- 110 dB
- Supplier Package :
- SOIC N
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Architecture :
- VOLTAGE-FEEDBACK
- Datasheets
- MCP6292-E/SN
MCP6292-E/SN Documents

2 Channels 25mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 3.6, 2.7, 3 V 2.4V~6V MCP6292 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6292-E/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 3mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 1mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 110dB for the time being. A instrumentation amplifier like this has 2 circuits. On the buffer amps, there are 2 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 125 °C should not be used for the operation of buffer amplifier. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3.6, 2.7, 3 V. There is a recommendation that this electrical part be used with a supply with 1mA current rating. This electric component can work from a voltage of under 5.5 V as far as supply voltage is concerned. A voltage of 2.4 V or higher is recommended for the linear amplifier's supply voltage. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 31620. The buffer amplifier consists of 2 amplifiers. 8 wire terminals are provided on this op amp.
MCP6292-E/SN Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6292-E/SN Applications
There are a lot of Microchip Technology
MCP6292-E/SN Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















