MCP6292-E/P
- Mfr.Part #
- MCP6292-E/P
- Manufacturer
- Microchip Technology
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8DIP
- Stock
- 1,356
- In Stock :
- 1,356
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Single Supply Voltage (Max) :
- 6(V)
- Qualification :
- AEC-Q100
- Current - Input Bias :
- 1pA
- Slew Rate :
- 7V/µs
- Max Supply Voltage :
- 5.5 V
- Max Frequency :
- 10kHz
- Pin Count :
- 8
- Amplifier Type :
- GENERAL PURPOSE
- Low-Offset :
- No
- Number of Pins :
- 8
- Shut Down Feature :
- No
- Frequency Compensation :
- yes
- Unity Gain Bandwidth Product :
- 10
- Product Status :
- Active
- Maximum Operating Supply Voltage :
- 5.5 V
- Average Bias Current-Max (IIB) :
- 0.005μA
- Factory Lead Time :
- 10 Weeks
- Voltage Gain-Min :
- 31620
- Voltage Gain :
- 110dB
- JESD-30 Code :
- R-PDIP-T8
- Radiation Hardening :
- No
- Number of Terminals :
- 8
- Seated Height-Max :
- 4.32 mm
- Min Operating Temperature :
- -40 °C
- Low-Bias :
- yes
- Schedule B :
- 8542330000, 8542330000/8542330000, 8542330000/8542330000/8542330000, 8542330000/8542330000/8542330000/8542330000
- Bandwidth :
- 10MHz
- Terminal Pitch :
- 2.54 mm
- Screening Level :
- Extended Industrial
- Pbfree Code :
- yes
- Operating Temperature Classification :
- Automotive
- Rad Hardened :
- No
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Common Mode Rejection Ratio :
- 70 dB
- Current - Output / Channel :
- 25mA
- Voltage Gain in dB :
- 110(dB)
- Nominal Supply Current :
- 1mA
- Input Offset Voltage (Vos) :
- 3mV
- Input Bias Current :
- 0.001(nA)
- Brand :
- Microchip Technology / Atmel
- Operating Temp Range :
- -40C to 125C
- Surface Mount :
- No
- Supplier Package :
- PDIP
- Moisture Sensitivity Level (MSL) :
- Not Applicable
- Number of Circuits :
- 2
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Maximum Input Voltage :
- 6 V
- Reach Compliance Code :
- Compliant
- Input Offset Voltage-Max :
- 5000 µV
- Supply Voltage :
- 5V
- Manufacturer :
- Microchip
- Output Current :
- 25mA
- Minimum Operating Temperature :
- -40 °C
- Shut Down Support :
- No
- Supplier Device Package :
- 8-PDIP
- Maximum Operating Temperature :
- +125 °C
- Terminal Finish :
- Matte Tin (Sn)
- Mounting Style :
- Through Hole
- Package Type :
- PDIP
- Micropower :
- No
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Product Type :
- Op Amps - Operational Amplifiers
- Voltage - Input Offset :
- 3mV
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Voltage - Supply, Single/Dual (±) :
- 2.4V~6V
- Published :
- 2004
- Output Type :
- Rail-to-Rail
- Min Input Voltage :
- 2.4V
- Operating Temperature :
- -40°C~125°C
- Architecture :
- VOLTAGE-FEEDBACK
- Single Supply Voltage (Typ) :
- 3/5(V)
- Terminal Form :
- THROUGH-HOLE
- Power Supplies :
- 2.5/5 V
- Mounting Type :
- Through Hole
- Base Part Number :
- MCP6292
- Single Supply Voltage (Min) :
- 2.4(V)
- Product :
- Operational Amplifiers
- Height :
- 4.953mm
- Max Input Voltage :
- 6V
- Number of Amplifiers :
- 2
- Number of Elements :
- 2
- Series :
- --
- Min Supply Voltage :
- 2.4 V
- Dimensions :
- 9.27 x 6.35 x 3.3mm
- Dual Supply Voltage (Max) :
- Not Required(V)
- Max Operating Temperature :
- 125 °C
- Peak Reflow Temperature (Cel) :
- Not Applicable
- RoHS Status :
- ROHS3 Compliant
- Unity Gain BW-Nom :
- 10000 kHz
- Power Supply Requirement :
- Single
- Current - Supply :
- 1mA
- REACH SVHC :
- No SVHC
- Mount :
- Through Hole
- Temperature Grade :
- Automotive
- Width :
- 7.112mm
- Packaging :
- Tube
- Package :
- Tube
- RoHS :
- Details
- Power Supply Rejection Ratio :
- 70(dB)
- Gain Bandwidth Product :
- 10MHz
- Lead Free :
- Lead Free
- Supply Type :
- Single
- Package Shape :
- RECTANGULAR
- Base Product Number :
- MCP6292
- Number of Channels per Chip :
- 2
- Product Category :
- Operational Amplifiers - Op Amps
- Input Voltage Range :
- 2.4 → 6 V
- MSL :
- -
- Number of Functions :
- 2
- Number of Terminations :
- 8
- ECCN Code :
- EAR99
- Operating Supply Voltage :
- 5 V
- Power Supply Type :
- Single
- Dual Supply Voltage (Min) :
- Not Required(V)
- Wideband :
- No
- Terminal Position :
- Dual
- Input Offset Voltage :
- 3(mV)
- Supply Current-Max :
- 2.6 mA
- Rail to Rail :
- Rail to Rail Input/Output
- Number of Channels :
- 2
- Mounting :
- Through Hole
- JESD-609 Code :
- e3
- Supply Voltage Limit-Max :
- 7V
- Voltage Gain dB :
- 110 dB
- HTS Code :
- 8542.33.00.01
- Shutdown :
- No Shutdown
- Type :
- General Purpose Amplifier
- Output Current per Channel :
- 25mA
- Qualification Status :
- Not Qualified
- Programmable Power :
- No
- Operating Supply Current :
- 1mA
- Length :
- 10.16mm
- Power :
- No
- Datasheets
- MCP6292-E/P

2 Channels 25mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5 V 2.4V~6V MCP6292 8 Pins 8-DIP (0.300, 7.62mm)
MCP6292-E/P Overview
There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 3mV. For this electronic part, it is recommended that you mount it with type Through Hole. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 1mA . 110dB should be the voltage gain. A linear amplifier like this has 2 circuits on it. Op amp ic has 2 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. In order for this buffer op amp to function, it should have a temperature of at least -40 °C degrees Celsius. At temperatures greater than 125 °C, Instrumentation amplifier should not be used. There are 2 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5 V. We recommend that you use this electronic part with an 1mA supply in order to get the best performance from it. The electrical part is capable of being powered by a voltage of under 5.5 V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.4 V. The -- represents the op amp's series number. This operational amplifier can conduct a voltage gain of up to 31620 at a minimum. On the linear amplifier, there are 2 amplifiers that are used. A total of 8 terminals are available on this buffer op amp for the connection of wires.
MCP6292-E/P Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6292-E/P Applications
There are a lot of Microchip Technology
MCP6292-E/P Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















