MCP6292-E/MS
- Mfr.Part #
- MCP6292-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8MSOP
- Stock
- 1,995
- In Stock :
- 1,995
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Seated Height-Max :
- 1.1 mm
- Shutdown :
- No Shutdown
- Package :
- Tube
- Bandwidth :
- 10MHz
- Supply Voltage :
- 5V
- Output Current :
- 25mA
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Unity Gain BW-Nom :
- 10000 kHz
- Unity Gain Bandwidth Product :
- 10
- Output Current per Channel :
- 25mA
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Operating Supply Voltage :
- 3.3, 6 V
- Architecture :
- VOLTAGE-FEEDBACK
- Pin Count :
- 8
- Number of Functions :
- 2
- Number of Channels per Chip :
- 2
- Brand :
- Microchip Technology / Atmel
- Lead Free :
- Lead Free
- Voltage - Supply, Single/Dual (±) :
- 2.4V~6V
- Qualification :
- AEC-Q100
- Dual Supply Voltage (Min) :
- Not Required(V)
- Package Shape :
- Square
- Input Offset Voltage :
- 3(mV)
- Screening Level :
- Extended Industrial
- Surface Mount :
- yes
- Low-Bias :
- yes
- Slew Rate :
- 7V/µs
- Mounting Type :
- Surface Mount
- RoHS :
- Compliant
- Micropower :
- No
- Supply Current-Max :
- 2.6 mA
- Product :
- Operational Amplifiers
- Current - Input Bias :
- 1pA
- Peak Reflow Temperature (Cel) :
- 260
- Nominal Supply Current :
- 1mA
- Current - Output / Channel :
- 25mA
- Radiation Hardening :
- No
- Terminal Pitch :
- 0.65mm
- Product Type :
- Op Amps - Operational Amplifiers
- Supplier Package :
- MSOP
- RoHS Status :
- ROHS3 Compliant
- Number of Amplifiers :
- 2
- Pbfree Code :
- yes
- Maximum Operating Temperature :
- +125 °C
- Shut Down Support :
- No
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Base Part Number :
- MCP6292
- Mounting :
- Surface Mount
- Voltage - Input Offset :
- 3mV
- Package Type :
- MSOP
- Supply Type :
- Single
- Max Operating Temperature :
- 125 °C
- MSL :
- MSL 1 - Unlimited
- Input Offset Voltage-Max :
- 5000 µV
- Power Supply Requirement :
- Single
- Input Bias Current :
- 0.001(nA)
- Single Supply Voltage (Min) :
- 2.4(V)
- Frequency Compensation :
- yes
- JESD-609 Code :
- e3
- Maximum Operating Supply Voltage :
- 5.5 V
- Number of Terminals :
- 8
- Number of Circuits :
- 2
- Power Supply Rejection Ratio :
- 70(dB)
- Dual Supply Voltage (Max) :
- Not Required(V)
- Packaging :
- Tube
- Power :
- No
- Qualification Status :
- Not Qualified
- Rad Hardened :
- No
- ECCN Code :
- EAR99
- Dimensions :
- 3 x 3 x 0.85mm
- Current - Supply :
- 1mA
- Terminal Form :
- Gull wing
- Input Offset Voltage (Vos) :
- 3mV
- REACH SVHC :
- No SVHC
- HTS Code :
- 8542.33.00.01
- Single Supply Voltage (Max) :
- 6(V)
- Mounting Style :
- SMD/SMT
- Operating Temperature Classification :
- Automotive
- Power Supply Type :
- Single
- Operating Temp Range :
- -40C to 125C
- Max Supply Voltage :
- 5.5 V
- Type :
- General Purpose Amplifier
- Supply Voltage Limit-Max :
- 7V
- Mount :
- Surface Mount
- Amplifier Type :
- GENERAL PURPOSE
- Rail to Rail :
- Rail to Rail Input/Output
- Product Status :
- Active
- Power Supplies :
- 2.5/5 V
- Voltage Gain dB :
- 110 dB
- Number of Pins :
- 8
- Terminal Finish :
- Matte Tin (Sn)
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Operating Temperature :
- -40°C~125°C
- Shut Down Feature :
- No
- Operating Supply Current :
- 1mA
- Programmable Power :
- No
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Min Supply Voltage :
- 2.4 V
- Factory Lead Time :
- 2 Weeks
- Voltage Gain :
- 110dB
- Temperature Grade :
- Automotive
- Voltage Gain-Min :
- 31620
- Published :
- 2000
- Supplier Device Package :
- 8-MSOP
- Manufacturer :
- Microchip
- Number of Channels :
- 2
- Average Bias Current-Max (IIB) :
- 0.005μA
- Wideband :
- No
- Minimum Operating Temperature :
- -40 °C
- Number of Terminations :
- 8
- Voltage Gain in dB :
- 110(dB)
- Single Supply Voltage (Typ) :
- 3/5(V)
- Number of Elements :
- 2
- Base Product Number :
- MCP6292
- Output Type :
- Rail-to-Rail
- Gain Bandwidth Product :
- 10MHz
- Width :
- 3mm
- Min Operating Temperature :
- -40 °C
- Low-Offset :
- No
- Product Category :
- Operational Amplifiers - Op Amps
- Terminal Position :
- Dual
- Height :
- 850μm
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Series :
- --
- Common Mode Rejection Ratio :
- 70 dB
- JESD-30 Code :
- S-PDSO-G8
- Reach Compliance Code :
- Compliant
- Length :
- 3mm
- Datasheets
- MCP6292-E/MS

2 Channels 25mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 3.3, 6 V 2.4V~6V MCP6292 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6292-E/MS Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 3mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 1mA , this buffer op amp will be able to operate. Keeping the voltage gain at 110dB is the best course of action. The buffer amp consists of 2 circuits in total. 2 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than -40 °C degrees Celsius in order to function properly. You should not use op amp above 125 °C degrees. A total of 2 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 3.3, 6 V. A supply of 1mA or higher is recommended for use with this electronic part. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 5.5 V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 2.4 V, it is recommended to keep it higher. The -- stands for the buffer op amp's serial number. There are a maximum of 31620 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. As you can see, the linear amplifier has 2 amplifiers. The buffer op amp has 8 terminals that can be used for connecting wires to the amplifier.
MCP6292-E/MS Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6292-E/MS Applications
There are a lot of Microchip Technology
MCP6292-E/MS Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















