MCP6291-E/SN

Share

Or copy the link below:

Mfr.Part #
MCP6291-E/SN
Manufacturer
Microchip Technology
Package / Case
8-SOIC (0.154, 3.90mm Width)
Datasheet
Download
Description
IC OPAMP GP 1 CIRCUIT 8SOIC
Stock
789
In Stock :
789

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Microchip Technology
Product Category :
Instrumentation, OP Amps, Buffer Amps
Height :
1.25mm
Surface Mount :
yes
Dual Supply Voltage (Max) :
Not Required(V)
Width :
3.9mm
Rad Hardened :
No
Mounting :
Surface Mount
Input Offset Voltage (Vos) :
3mV
Input Voltage Range :
2.4 → 6 V
Input Offset Voltage-Max :
5000 µV
Seated Height-Max :
1.75 mm
Min Operating Temperature :
-40 °C
Dimensions :
4.9 x 3.9 x 1.5mm
Micropower :
No
Operating Supply Voltage :
5.5 V
Power Supplies :
2.5/5V
Single Supply Voltage (Typ) :
3/5(V)
Single Supply Voltage (Max) :
6(V)
Maximum Operating Temperature :
+125 °C
Current - Supply :
1mA
Terminal Finish :
Matte Tin (Sn)
Minimum Operating Temperature :
-40 °C
Single Supply Voltage (Min) :
2.4(V)
Mounting Type :
Surface Mount
Bandwidth :
10 MHz
Common Mode Rejection Ratio :
70 dB
Number of Terminations :
8
Number of Channels per Chip :
1
Voltage Gain in dB :
110(dB)
Maximum Input Voltage :
6 V
Supplier Device Package :
8-SOIC
Voltage Gain :
110dB
Product Category :
Operational Amplifiers - Op Amps
Dual Supply Voltage (Typ) :
Not Required(V)
Base Product Number :
MCP6291
Operating Temperature Classification :
Automotive
Terminal Form :
Gull wing
Terminal Position :
Dual
Amplifier Type :
GENERAL PURPOSE
Power Supply Rejection Ratio :
70(dB)
Voltage - Input Offset :
3mV
Peak Reflow Temperature (Cel) :
260
Common-mode Reject Ratio-Min :
65 dB
Average Bias Current-Max (IIB) :
0.005μA
Series :
--
Product Status :
Active
Power :
No
Output Current :
25mA
RoHS :
Details
Gain Bandwidth Product :
10MHz
Power Supply Rejection Ratio (PSRR) :
70dB
Mounting Style :
SMD/SMT
Number of Pins :
8
Maximum Input Offset Current :
0.000001(TYP)@5.5V
Operating Temperature :
-40°C~125°C
Package :
Tube
RoHS Status :
ROHS3 Compliant
Number of Terminals :
8
Published :
2004
Factory Lead Time :
10 Weeks
Min Supply Voltage :
2.4 V
Shutdown :
No Shutdown
HTS Code :
8542.33.00.01
Operating Temp Range :
-40C to 125C
Maximum Operating Supply Voltage :
5.5 V
Power Supply Requirement :
Single
Low-Offset :
No
Voltage Gain-Min :
31620
Power Supply Type :
Single
Dual Supply Voltage (Min) :
Not Required(V)
Output Type :
Rail-to-Rail
Radiation Hardening :
No
Temperature Grade :
Automotive
Shut Down Feature :
No
Nominal Supply Current :
1mA
Mount :
Surface Mount
Number of Functions :
1
Screening Level :
Extended Industrial
Current - Output / Channel :
25mA
Brand :
Microchip Technology
Number of Elements :
1
Schedule B :
8542330000/8542330000/8542330000/8542330000/8542330000
Unity Gain Bandwidth Product :
10
Max Supply Voltage :
5.5 V
ECCN Code :
EAR99
Manufacturer :
Microchip
Slew Rate :
7V/µs
Frequency Compensation :
yes
Number of Channels :
1
Max Operating Temperature :
125 °C
Programmable Power :
No
Output Current per Channel :
25mA
Product :
Operational Amplifiers
Unity Gain BW-Nom :
10000 kHz
Moisture Sensitivity Level (MSL) :
1 (Unlimited)
Qualification :
AEC-Q100
Architecture :
VOLTAGE-FEEDBACK
Voltage - Supply, Single/Dual (±) :
2.4V~6V
Package / Case :
8-SOIC (0.154, 3.90mm Width)
Pin Count :
8
Package Type :
SOIC N
Number of Circuits :
1
Product Type :
Op Amps - Operational Amplifiers
Qualification Status :
Not Qualified
Packaging :
Tube
Wideband :
No
Number of Amplifiers :
1
Package Shape :
RECTANGULAR
Lifecycle Status :
Production (Last Updated: 2 years ago)
Lead Free :
Lead Free
Reach Compliance Code :
Compliant
JESD-30 Code :
R-PDSO-G8
Voltage Gain dB :
110 dB
Rail to Rail :
Rail to Rail Input/Output
Current - Input Bias :
1pA
Supply Voltage Limit-Max :
7V
REACH SVHC :
No SVHC
Supply Voltage :
5V
Type :
General Purpose Amplifier
Shut Down Support :
No
Operating Supply Current :
1mA
Supplier Package :
SOIC N
Length :
4.9mm
Terminal Pitch :
1.27 mm
Base Part Number :
MCP6291
Input Offset Voltage :
3(mV)
JESD-609 Code :
e3
Low-Bias :
yes
Pbfree Code :
yes
Input Bias Current :
0.001(nA)
Time@Peak Reflow Temperature-Max (s) :
40
Supply Type :
Single
Supply Current-Max :
1.3 mA
Datasheets
MCP6291-E/SN
Introducing Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP6291-E/SN from Chip IC,where excellence meets affordability. This product stands out with its Mounting Type:Surface Mount, Bandwidth:10 MHz, Number of Terminations:8, Number of Pins:8, Operating Temperature:-40°C~125°C, Number of Channels:1, Package / Case:8-SOIC (0.154, 3.90mm Width), Type:General Purpose Amplifier, Base Part Number:MCP6291, MCP6291-E/SN pinout, MCP6291-E/SN datasheet PDF, MCP6291-E/SN amp .Beyond Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP6291-E/SN ,we also offer OP07CDR, TS321CX5 RFG, NE5532ADR, Our vast inventory has you covered. Contact us now for immediate solutions.

Microchip Technology MCP6291-E/SN


1 Channels 25mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 2.4V~6V MCP6291 8 Pins 8-SOIC (0.154, 3.90mm Width)

MCP6291-E/SN Overview


In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 3mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 1mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 110dB for the time being. A instrumentation amplifier like this has 1 circuits. On the buffer amps, there are 1 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 125 °C should not be used for the operation of buffer amplifier. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. There is a recommendation that this electrical part be used with a supply with 1mA current rating. This electric component can work from a voltage of under 5.5 V as far as supply voltage is concerned. A voltage of 2.4 V or higher is recommended for the linear amplifier's supply voltage. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 31620. The buffer amplifier consists of 1 amplifiers. 8 wire terminals are provided on this op amp.

MCP6291-E/SN Features


8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations


MCP6291-E/SN Applications


There are a lot of Microchip Technology
MCP6291-E/SN Instrumentational OP Amps applications.


  • Multiplication circuits
  • Division circuits
  • Precision measurement
  • Power control
  • Information processing
  • Weak signal detection
  • Signal amplification
  • Signal filtering
  • Signal operation
  • Video computer boards
Purchase

You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • ROHM Semiconductor
    IC CMOS 2 CIRCUIT 8SOP
  • Diodes Incorporated
    IC OPAMP GP 1 CIRCUIT SOT25
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
  • Texas Instruments
    IC OPAMP GP 4 CIRCUIT 14SOIC
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
RFQ
BOM