MCP6282T-E/MS
- Mfr.Part #
- MCP6282T-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8MSOP
- Stock
- 25,220
- In Stock :
- 25,220
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Current - Supply :
- 450μA
- Product :
- Operational Amplifiers
- Supplier Device Package :
- 8-MSOP
- HTS Code :
- 8542.33.00.01
- Supply Voltage Limit-Max :
- 7V
- Length :
- 3mm
- Packaging :
- Tape and Reel (TR)
- Brand :
- Microchip Technology / Atmel
- Dual Supply Voltage (Min) :
- Not Required(V)
- Shut Down Feature :
- No
- Number of Channels :
- 2 Channel
- Power Supplies :
- 2.5/5 V
- JESD-609 Code :
- e3
- Temperature Grade :
- Automotive
- Nominal Supply Current :
- 450μA
- Supply Voltage :
- 5V
- Gain Bandwidth Product :
- 5MHz
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Product Status :
- Active
- Frequency Compensation :
- yes
- Common Mode Rejection Ratio :
- 70 dB
- Mount :
- Surface Mount
- Package Type :
- MSOP
- Architecture :
- VOLTAGE-FEEDBACK
- Qualification :
- AEC-Q100
- Output Type :
- Rail-to-Rail
- Maximum Operating Supply Voltage :
- 5.5 V
- Radiation Hardening :
- No
- Min Operating Temperature :
- -40 °C
- Lead Free :
- Lead Free
- Packing Method :
- Tape and Reel
- Pin Count :
- 8
- Input Offset Voltage-Max :
- 5000 µV
- Base Part Number :
- MCP6282
- Mounting :
- Surface Mount
- Current - Input Bias :
- 1pA
- Low-Bias :
- yes
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Input Offset Voltage (Vos) :
- 3mV
- Amplifier Type :
- GENERAL PURPOSE
- Single Supply Voltage (Min) :
- 2.2(V)
- Supply Type :
- Single
- Product Category :
- Operational Amplifiers - Op Amps
- MSL :
- MSL 2 - 1 year
- Voltage Gain dB :
- 110 dB
- Surface Mount :
- yes
- Maximum Operating Temperature :
- + 125 C
- Qualification Status :
- Not Qualified
- Mounting Style :
- SMD/SMT
- Number of Terminations :
- 8
- Pbfree Code :
- yes
- Voltage Gain :
- 110dB
- Average Bias Current-Max (IIB) :
- 0.005μA
- Input Bias Current :
- 0.001(nA)
- Voltage Gain-Min :
- 31620
- Output Current per Channel :
- 25mA
- Min Supply Voltage :
- 2.2 V
- Max Supply Voltage :
- 5.5 V
- RoHS Status :
- ROHS3 Compliant
- Manufacturer :
- Microchip
- Supply Current-Max :
- 1.14 mA
- Voltage Gain in dB :
- 110(dB)
- Low-Offset :
- No
- Max Operating Temperature :
- 125 °C
- Height Seated (Max) :
- 1.1mm
- Base Product Number :
- MCP6282
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Number of Terminals :
- 8
- Minimum Operating Temperature :
- - 40 C
- Terminal Position :
- Dual
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Operating Supply Current :
- 450μA
- Height :
- 0.85 mm
- Number of Circuits :
- 2
- Number of Elements :
- 2
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Unity Gain Bandwidth Product :
- 5
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Terminal Pitch :
- 0.65mm
- Supplier Package :
- MSOP
- Published :
- 2008
- Terminal Finish :
- Matte Tin (Sn)
- Output Current :
- 25mA
- RoHS :
- Details
- Type :
- General Purpose Amplifier
- Slew Rate :
- 2.5V/µs
- Voltage - Input Offset :
- 3mV
- ECCN Code :
- EAR99
- Series :
- --
- Number of Functions :
- 2
- Bandwidth :
- 5MHz
- Operating Supply Voltage :
- 5.5 V
- Seated Height-Max :
- 1.1 mm
- Micropower :
- yes
- Rad Hardened :
- No
- Single Supply Voltage (Max) :
- 6(V)
- Mounting Type :
- Surface Mount
- Voltage - Supply, Single/Dual (±) :
- 2.2V~6V
- Operating Temperature Classification :
- Automotive
- Product Type :
- Op Amps - Operational Amplifiers
- JESD-30 Code :
- S-PDSO-G8
- Number of Channels per Chip :
- 2
- Current - Output / Channel :
- 25mA
- Schedule B :
- 8542330000, 8542330000/8542330000/8542330000/8542330000/8542330000
- Terminal Form :
- Gull wing
- Power Supply Requirement :
- Single
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Unity Gain BW-Nom :
- 5000 kHz
- Input Offset Voltage :
- 3(mV)
- Number of Pins :
- 8
- Single Supply Voltage (Typ) :
- 3/5(V)
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Package Shape :
- Square
- Width :
- 3 mm
- Reach Compliance Code :
- Compliant
- Operating Temp Range :
- -40C to 125C
- Operating Temperature :
- -40°C~125°C
- Dual Supply Voltage (Max) :
- Not Required(V)
- Factory Lead Time :
- 12 Weeks
- Shutdown :
- No Shutdown
- Peak Reflow Temperature (Cel) :
- 260
- Power Supply Rejection Ratio :
- 70(dB)
- Screening Level :
- Extended Industrial
- Datasheets
- MCP6282T-E/MS
MCP6282T-E/MS Documents

2 Channel Channels 25mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 2.2V~6V MCP6282 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6282T-E/MS Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 3mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 450μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 110dB for the time being. A instrumentation amplifier like this has 2 circuits. On the buffer amps, there are 2 Channel channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 125 °C should not be used for the operation of buffer amplifier. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a recommendation that this electrical part be used with a supply with 450µA current rating. This electric component can work from a voltage of under 5.5 V as far as supply voltage is concerned. A voltage of 2.2 V or higher is recommended for the linear amplifier's supply voltage. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 31620. 8 wire terminals are provided on this op amp.
MCP6282T-E/MS Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6282T-E/MS Applications
There are a lot of Microchip Technology
MCP6282T-E/MS Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















