MCP6273-E/MS
- Mfr.Part #
- MCP6273-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8MSOP
- Stock
- 655
- In Stock :
- 655
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Manufacturer :
- Microchip
- Maximum Operating Temperature :
- + 125 C
- Terminal Finish :
- Matte Tin (Sn)
- Lead Free :
- Contains Lead
- Nominal Supply Current :
- 170μA
- Number of Functions :
- 1
- Supply Voltage Limit-Max :
- 7V
- Number of Channels :
- 1
- Published :
- 2008
- Power :
- No
- Package Shape :
- Square
- REACH SVHC :
- No SVHC
- Average Bias Current-Max (IIB) :
- 0.005μA
- ECCN Code :
- EAR99
- Base Part Number :
- MCP6273
- Packaging :
- Tube
- Voltage - Supply, Single/Dual (±) :
- 2V~6V
- Current - Supply :
- 170μA
- Base Product Number :
- MCP6273
- Operating Temperature :
- -40°C~125°C
- Shutdown :
- No Shutdown
- Supplier Device Package :
- 8-MSOP
- Supply Current-Max :
- 0.24 mA
- Output Type :
- Rail-to-Rail
- Number of Channels per Chip :
- 1
- Number of Amplifiers :
- 1
- Current - Input Bias :
- 1pA
- Product Status :
- Active
- Amplifier Type :
- GENERAL PURPOSE
- RoHS :
- Details
- Mounting :
- Surface Mount
- Type :
- General Purpose Amplifier
- Voltage Gain-Min :
- 31620
- JESD-609 Code :
- e3
- Pin Count :
- 8
- Supply Voltage :
- 5V
- Terminal Position :
- Dual
- Temperature Grade :
- Automotive
- HTS Code :
- 8542.33.00.01
- Maximum Operating Supply Voltage :
- 5.5 V
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Max Supply Voltage :
- 5.5 V
- Terminal Pitch :
- 0.65mm
- Common Mode Rejection Ratio :
- 70 dB
- Qualification :
- AEC-Q100
- Programmable Power :
- No
- Number of Terminations :
- 8
- Power Supplies :
- 2.5/5V
- Low-Bias :
- yes
- Output Current per Channel :
- 25mA
- Reach Compliance Code :
- Compliant
- Low-Offset :
- No
- Number of Elements :
- 1
- Current - Output / Channel :
- 25mA
- Factory Lead Time :
- 18 Weeks
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Minimum Operating Temperature :
- - 40 C
- Gain Bandwidth Product :
- 2MHz
- Input Offset Voltage-Max :
- 5000 µV
- Qualification Status :
- Not Qualified
- Product :
- Operational Amplifiers
- Package :
- Tube
- Screening Level :
- Extended
- Voltage Gain dB :
- 110 dB
- Brand :
- Microchip Technology
- Number of Pins :
- 8
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Surface Mount :
- yes
- Supply Type :
- Single
- Operating Supply Current :
- 170μA
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Wideband :
- No
- Power Supply Type :
- Single
- Voltage Gain :
- 110dB
- Min Supply Voltage :
- 2 V
- Input Offset Voltage (Vos) :
- 3mV
- Height :
- 850μm
- Slew Rate :
- 0.9V/µs
- Unity Gain BW-Nom :
- 2000 kHz
- Width :
- 3mm
- Min Operating Temperature :
- -40 °C
- Mounting Style :
- SMD/SMT
- Length :
- 3mm
- Supplier Package :
- MSOP
- Number of Circuits :
- 1
- Voltage - Input Offset :
- 3mV
- Terminal Form :
- Gull wing
- Max Operating Temperature :
- 125 °C
- Operating Supply Voltage :
- 5.5 V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Peak Reflow Temperature (Cel) :
- 260
- Output Current :
- 25mA
- Radiation Hardening :
- No
- Series :
- --
- Frequency Compensation :
- yes
- Micropower :
- yes
- RoHS Status :
- ROHS3 Compliant
- Input Bias Current :
- 1 pA
- Mounting Type :
- Surface Mount
- Pbfree Code :
- yes
- Seated Height-Max :
- 1.1 mm
- Product Category :
- Operational Amplifiers - Op Amps
- Shut Down Support :
- No
- Product Type :
- Op Amps - Operational Amplifiers
- Number of Terminals :
- 8
- Bandwidth :
- 2 MHz
- Mount :
- Surface Mount
- JESD-30 Code :
- S-PDSO-G8
- Architecture :
- VOLTAGE-FEEDBACK
- Datasheets
- MCP6273-E/MS

1 Channels 25mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 2V~6V MCP6273 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6273-E/MS Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 3mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 170μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 110dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This instrumentation amplifier cannot operate below -40 °C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125 °C. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. For optimal performance, this electrical part should be connected to a supply with a current of 170µA. It is important to keep in mind that the power supply voltage of this electric component is below 5.5 V, which is suitable. Keeping the linear amplifier's supply voltage above 2 V is recommended. Buffer op amp series numbers are indicated by the --. This op amp ic can conduct a minimum voltage gain of 31620. The linear amplifier has 1 amplifiers. There are 8 wire terminals on this op amp ic.
MCP6273-E/MS Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6273-E/MS Applications
There are a lot of Microchip Technology
MCP6273-E/MS Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















