MCP6272T-E/SN
- Mfr.Part #
- MCP6272T-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 11,791
- In Stock :
- 11,791
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Average Bias Current-Max (IIB) :
- 0.005μA
- Current - Output / Channel :
- 25mA
- Frequency Compensation :
- yes
- Max Operating Temperature :
- 125 °C
- Peak Reflow Temperature (Cel) :
- 260
- Terminal Form :
- Gull wing
- Number of Pins :
- 8
- Seated Height-Max :
- 1.75 mm
- Radiation Hardening :
- No
- Mounting Type :
- Surface Mount
- Mounting Style :
- SMD/SMT
- Amplifier Type :
- GENERAL PURPOSE
- Reach Compliance Code :
- Compliant
- Number of Terminals :
- 8
- Published :
- 2008
- Product :
- Operational Amplifiers
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Mounting :
- Surface Mount
- Base Part Number :
- MCP6272
- RoHS :
- Details
- Common Mode Rejection Ratio :
- 70 dB
- Factory Lead Time :
- 10 Weeks
- Terminal Pitch :
- 1.27 mm
- Lead Free :
- Lead Free
- Width :
- 3.9 mm
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Nominal Supply Current :
- 170μA
- Number of Terminations :
- 8
- Brand :
- Microchip Technology
- Length :
- 4.9mm
- Packaging :
- Tape and Reel (TR)
- Operating Temperature :
- -40°C~125°C
- Voltage - Input Offset :
- 3mV
- Gain Bandwidth Product :
- 2MHz
- Screening Level :
- Extended
- RoHS Status :
- ROHS3 Compliant
- Low-Bias :
- yes
- Height :
- 1.25 mm (Min)
- Base Product Number :
- MCP6272
- Temperature Grade :
- Automotive
- Max Supply Voltage :
- 5.5 V
- Supply Voltage Limit-Max :
- 7V
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Mount :
- Surface Mount
- Voltage Gain-Min :
- 31620
- Number of Channels per Chip :
- 2
- JESD-30 Code :
- R-PDSO-G8
- Voltage - Supply, Single/Dual (±) :
- 2V~6V
- Product Status :
- Active
- Min Operating Temperature :
- -40 °C
- Supplier Device Package :
- 8-SOIC
- Input Offset Voltage (Vos) :
- 3mV
- Power Supplies :
- 2.5/5 V
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Maximum Operating Supply Voltage :
- 5.5 V
- Current - Input Bias :
- 1pA
- Slew Rate :
- 0.9V/µs
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Current - Supply :
- 170μA
- Micropower :
- yes
- Product Type :
- Op Amps - Operational Amplifiers
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Output Type :
- Rail-to-Rail
- Input Bias Current :
- 1 pA
- Number of Functions :
- 2
- Low-Offset :
- No
- Unity Gain BW-Nom :
- 2000 kHz
- ECCN Code :
- EAR99
- Supply Voltage :
- 5V
- Qualification Status :
- Not Qualified
- Operating Supply Voltage :
- 5.5 V
- Supplier Package :
- SOIC N
- Supply Current-Max :
- 0.48 mA
- Voltage Gain :
- 110dB
- Maximum Operating Temperature :
- + 125 C
- Minimum Operating Temperature :
- - 40 C
- Voltage Gain dB :
- 110 dB
- Terminal Finish :
- Matte Tin (Sn)
- Type :
- General Purpose Amplifier
- Terminal Position :
- Dual
- Pin Count :
- 8
- Package Shape :
- RECTANGULAR
- Product Category :
- Operational Amplifiers - Op Amps
- Pbfree Code :
- yes
- Manufacturer :
- Microchip
- Series :
- --
- Supply Type :
- Single
- Output Current per Channel :
- 25 mA
- Height Seated (Max) :
- 1.75mm
- JESD-609 Code :
- e3
- Packing Method :
- Tape and Reel
- HTS Code :
- 8542.33.00.01
- Input Offset Voltage-Max :
- 5000 µV
- Number of Elements :
- 2
- Min Supply Voltage :
- 2 V
- Output Current :
- 25mA
- Qualification :
- AEC-Q100
- Operating Supply Current :
- 170 uA
- Number of Channels :
- 2 Channel
- Shutdown :
- No Shutdown
- Architecture :
- VOLTAGE-FEEDBACK
- Surface Mount :
- yes
- Number of Circuits :
- 2
- Datasheets
- MCP6272T-E/SN

2 Channel Channels 25 mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 2V~6V MCP6272 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6272T-E/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 3mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 170 uA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 110dB at all times. A instrumentation amplifier like this has 2 circuits. On the buffer amps, there are 2 Channel channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 125 °C should not be used for the operation of this instrumentation amplifier. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a recommendation that this electrical part be used with a supply with 170μA current rating. This electric component can work from a voltage of under 5.5 V as far as supply voltage is concerned. A voltage of 2 V or higher is recommended for the linear amplifier's supply voltage. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 31620. 8 wire terminals are provided on this op amp.
MCP6272T-E/SN Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6272T-E/SN Applications
There are a lot of Microchip Technology
MCP6272T-E/SN Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















