MCP6271T-E/MS
- Mfr.Part #
- MCP6271T-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8MSOP
- Stock
- 1,484
- In Stock :
- 1,484
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Nominal Supply Current :
- 170μA
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Output Current per Channel :
- 25 mA
- Shutdown :
- No Shutdown
- Minimum Operating Temperature :
- - 40 C
- Average Bias Current-Max (IIB) :
- 0.005μA
- Surface Mount :
- yes
- Current - Output / Channel :
- 25mA
- Voltage - Supply, Single/Dual (±) :
- 2V~6V
- Low-Offset :
- No
- Output Type :
- Rail-to-Rail
- Micropower :
- yes
- Supply Current-Max :
- 0.24 mA
- Mounting Type :
- Surface Mount
- Unity Gain BW-Nom :
- 2000 kHz
- Series :
- --
- Terminal Finish :
- Matte Tin (Sn)
- Published :
- 2008
- Power Supplies :
- 2.5/5V
- Seated Height-Max :
- 1.1 mm
- Operating Supply Current :
- 170 uA
- Base Product Number :
- MCP6271
- Manufacturer :
- Microchip
- Frequency Compensation :
- yes
- Number of Channels per Chip :
- 1
- Maximum Operating Temperature :
- + 125 C
- Number of Functions :
- 1
- Pin Count :
- 8
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Operating Supply Voltage :
- 5 V
- Input Offset Voltage-Max :
- 5000 µV
- Common Mode Rejection Ratio :
- 70 dB
- Terminal Position :
- Dual
- Voltage Gain-Min :
- 31620
- Packaging :
- Tape and Reel (TR)
- Product :
- Operational Amplifiers
- ECCN Code :
- EAR99
- Number of Channels :
- 1 Channel
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Terminal Form :
- Gull wing
- Qualification :
- AEC-Q100
- Temperature Grade :
- Automotive
- JESD-609 Code :
- e3
- Number of Pins :
- 8
- Width :
- 3 mm
- Max Supply Voltage :
- 5.5 V
- Supplier Device Package :
- 8-MSOP
- Architecture :
- VOLTAGE-FEEDBACK
- Input Offset Voltage (Vos) :
- 3mV
- Mounting Style :
- SMD/SMT
- Lead Free :
- Lead Free
- Min Operating Temperature :
- -40 °C
- Screening Level :
- Extended
- RoHS :
- Details
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- HTS Code :
- 8542.33.00.01
- Type :
- General Purpose Amplifier
- Packing Method :
- Tape and Reel
- Common-mode Reject Ratio-Min :
- 65 dB
- Current - Supply :
- 170μA
- Brand :
- Microchip Technology
- Reach Compliance Code :
- Compliant
- Qualification Status :
- Not Qualified
- Output Current :
- 25mA
- Supplier Package :
- MSOP
- Number of Terminals :
- 8
- Radiation Hardening :
- No
- Product Type :
- Op Amps - Operational Amplifiers
- Mounting :
- Surface Mount
- Factory Lead Time :
- 18 Weeks
- Peak Reflow Temperature (Cel) :
- 260
- Slew Rate :
- 0.9V/µs
- Product Category :
- Operational Amplifiers - Op Amps
- Wideband :
- No
- Voltage - Input Offset :
- 3mV
- RoHS Status :
- ROHS3 Compliant
- JESD-30 Code :
- S-PDSO-G8
- Mount :
- Surface Mount
- Number of Elements :
- 1
- Package Shape :
- Square
- Operating Temperature :
- -40°C~125°C
- Supply Type :
- Single
- Number of Circuits :
- 1
- Supply Voltage Limit-Max :
- 7V
- Product Status :
- Active
- Supply Voltage :
- 5V
- Terminal Pitch :
- 0.65mm
- Pbfree Code :
- yes
- Voltage Gain :
- 110dB
- Programmable Power :
- No
- Low-Bias :
- yes
- Voltage Gain dB :
- 110 dB
- Maximum Operating Supply Voltage :
- 5.5 V
- Height :
- 0.85 mm
- Gain Bandwidth Product :
- 2MHz
- Current - Input Bias :
- 1pA
- Input Bias Current :
- 1 pA
- Number of Terminations :
- 8
- Base Part Number :
- MCP6271
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Length :
- 3mm
- Amplifier Type :
- GENERAL PURPOSE
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Min Supply Voltage :
- 2 V
- Power :
- No
- Max Operating Temperature :
- 125 °C
- Datasheets
- MCP6271T-E/MS

1 Channel Channels 25 mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5 V 2V~6V MCP6271 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6271T-E/MS Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 170 uA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 110dB. On this instrumentation amplifier, there are 1 circuits that are connected together. There are 1 Channel channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than -40 °C degrees Celsius. It should only be used at temperatures up above 125 °C. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. The operating supply voltage of the buffer op amp is rated at 5 V. The instrumentation amplifier is packed in the form of TAPE AND REEL. As a recommendation, this electronic component should be used with a power supply that can deliver 170μA. I would like to point out that this electrical component is capable of working from a voltage below 5.5 V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2 V at all times. The -- indicates the series number of the op amp. There is a minimum voltage gain of 31620 that this buffer op amp is capable of conducting. In order to connect the buffer amplifier to the wires, it is equipped with 8 terminals.
MCP6271T-E/MS Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6271T-E/MS Applications
There are a lot of Microchip Technology
MCP6271T-E/MS Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















