MCP6271-E/SN
- Mfr.Part #
- MCP6271-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 2,287
- In Stock :
- 2,287
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Channels per Chip :
- 1
- Output Current per Channel :
- 25mA
- Reach Compliance Code :
- Compliant
- JESD-609 Code :
- e3
- Voltage Gain :
- 110dB
- Operating Supply Current :
- 170μA
- Width :
- 3.9mm
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Minimum Operating Temperature :
- - 40 C
- Number of Terminals :
- 8
- Low-Offset :
- No
- Pin Count :
- 8
- Voltage - Supply, Single/Dual (±) :
- 2V~6V
- Package :
- Tube
- Pbfree Code :
- yes
- Number of Functions :
- 1
- Supplier Package :
- SOIC N
- Max Operating Temperature :
- 125 °C
- Voltage Gain dB :
- 110 dB
- Number of Pins :
- 8
- Wideband :
- No
- Number of Amplifiers :
- 1
- Min Supply Voltage :
- 2 V
- Mounting Style :
- SMD/SMT
- Screening Level :
- Extended
- HTS Code :
- 8542.33.00.01
- Brand :
- Microchip Technology
- Temperature Grade :
- Automotive
- Low-Bias :
- yes
- Surface Mount :
- yes
- Lead Free :
- Lead Free
- Factory Lead Time :
- 18 Weeks
- Mounting Type :
- Surface Mount
- Min Operating Temperature :
- -40 °C
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Product Status :
- Active
- Number of Terminations :
- 8
- Radiation Hardening :
- No
- REACH SVHC :
- No SVHC
- Product :
- Operational Amplifiers
- Frequency Compensation :
- yes
- Supply Voltage Limit-Max :
- 7V
- Maximum Operating Temperature :
- + 125 C
- Qualification Status :
- Not Qualified
- Terminal Finish :
- Matte Tin (Sn)
- Amplifier Type :
- GENERAL PURPOSE
- Input Offset Voltage (Vos) :
- 3mV
- Published :
- 2004
- Output Type :
- Rail-to-Rail
- Common-mode Reject Ratio-Min :
- 65 dB
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Base Part Number :
- MCP6271
- Number of Circuits :
- 1
- JESD-30 Code :
- R-PDSO-G8
- Packaging :
- Tube
- Terminal Position :
- Dual
- Number of Channels :
- 1
- Common Mode Rejection Ratio :
- 70 dB
- RoHS :
- Details
- Max Supply Voltage :
- 5.5 V
- Nominal Supply Current :
- 170μA
- Power :
- No
- RoHS Status :
- ROHS3 Compliant
- Mount :
- Surface Mount
- Power Supply Type :
- Single
- Sensing Method :
- Resistive
- Slew Rate :
- 0.9V/µs
- Number of Elements :
- 1
- Peak Reflow Temperature (Cel) :
- 260
- Gain Bandwidth Product :
- 2MHz
- Package Shape :
- RECTANGULAR
- Product Category :
- Operational Amplifiers - Op Amps
- Height :
- 1.25mm
- Series :
- --
- Product Type :
- Op Amps - Operational Amplifiers
- Programmable Power :
- No
- Supply Current-Max :
- 0.24 mA
- Input Offset Voltage-Max :
- 5000 µV
- Current - Output / Channel :
- 25mA
- Terminal Form :
- Gull wing
- Shutdown :
- No Shutdown
- Maximum Operating Supply Voltage :
- 5.5 V
- Unity Gain BW-Nom :
- 2000 kHz
- Voltage Gain-Min :
- 31620
- Operating Supply Voltage :
- 5.5 V
- Supply Voltage :
- 5V
- Input Bias Current :
- 1 pA
- Length :
- 4.9mm
- Mounting :
- Surface Mount
- ECCN Code :
- EAR99
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Current - Input Bias :
- 1pA
- Base Product Number :
- MCP6271
- Output Current :
- 25mA
- Type :
- General Purpose Amplifier
- Average Bias Current-Max (IIB) :
- 0.005μA
- Shut Down Support :
- No
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Seated Height-Max :
- 1.75 mm
- Supply Type :
- Single
- Terminal Pitch :
- 1.27 mm
- Current - Supply :
- 170μA
- Architecture :
- VOLTAGE-FEEDBACK
- Manufacturer :
- Microchip
- Power Supplies :
- 2.5/5V
- Qualification :
- AEC-Q100
- Supplier Device Package :
- 8-SOIC
- Micropower :
- yes
- Voltage - Input Offset :
- 3mV
- Schedule B :
- 8542330000, 8542330000/8542330000/8542330000/8542330000/8542330000
- Operating Temperature :
- -40°C~125°C
- Datasheets
- MCP6271-E/SN
MCP6271-E/SN Documents

1 Channels 25mA per Channel 1pA 70 dB Instrumentational OP Amps 0.005μA 5.5 V 2V~6V MCP6271 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6271-E/SN Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 3mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 170μA and 10 . Maintain 110dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. Buffer op amp is equipped with 1 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is recommended that the temperature of this op amp ic should not fall below -40 °C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 125 °C degrees. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. This electronic part is recommended to be used with an 170µA supply for best performance. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 5.5 V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2 V when using it. -- is the number that corresponds to the series of the buffer op amp. A minimum voltage gain of 31620 is the minimum voltage gain that this instrumentation amplifier is capable of producing. A linear amplifier such as this has 1 amplifiers on it. As part of this op amp ic, there are 8 terminals on which wires can be connected.
MCP6271-E/SN Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6271-E/SN Applications
There are a lot of Microchip Technology
MCP6271-E/SN Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















