MCP625-E/MF
- Mfr.Part #
- MCP625-E/MF
- Manufacturer
- Microchip Technology
- Package / Case
- 10-VFDFN Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 10DFN
- Stock
- 125
- In Stock :
- 125
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Frequency Compensation :
- yes
- Operating Supply Current :
- 2.5mA
- REACH SVHC :
- No SVHC
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Average Bias Current-Max (IIB) :
- 0.005μA
- Power Supplies :
- 3/5V
- Bandwidth :
- 20MHz
- Brand :
- Microchip Technology
- Minimum Operating Temperature :
- - 40 C
- Number of Terminals :
- 10
- Published :
- 2009
- Micropower :
- No
- Number of Circuits :
- 2
- Peak Reflow Temperature (Cel) :
- 260
- Pin Count :
- 10
- JESD-30 Code :
- S-PDSO-N10
- Packaging :
- Tube
- Number of Channels :
- 2
- Package :
- Tube
- Nominal Supply Current :
- 2.5mA
- Maximum Operating Temperature :
- + 125 C
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Voltage Gain-Min :
- 25100
- Factory Lead Time :
- 8 Weeks
- Gain Bandwidth Product :
- 20MHz
- Wideband :
- No
- Input Offset Voltage (Vos) :
- 200μV
- Supply Voltage Limit-Max :
- 6.5V
- Supplier Package :
- DFN EP
- Output Current per Channel :
- 70mA
- Temperature Grade :
- Automotive
- Amplifier Type :
- GENERAL PURPOSE
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Shutdown :
- No Shutdown
- Manufacturer :
- Microchip
- Pbfree Code :
- yes
- Product Category :
- Operational Amplifiers - Op Amps
- Reach Compliance Code :
- Compliant
- Supplier Device Package :
- 10-DFN (3x3)
- Type :
- General Purpose Amplifier
- Supply Type :
- Single
- Lead Free :
- Lead Free
- Package / Case :
- 10-VFDFN Exposed Pad
- Voltage Gain dB :
- 126 dB
- Slew Rate :
- 10V/μs
- Base Part Number :
- MCP625
- Radiation Hardening :
- No
- Qualification :
- AEC-Q100
- Number of Functions :
- 2
- Voltage Gain :
- 126dB
- Product :
- Operational Amplifiers
- Base Product Number :
- MCP625
- Width :
- 3mm
- Output Type :
- Rail-to-Rail
- Current - Supply :
- 2.5mA
- Product Type :
- Op Amps - Operational Amplifiers
- Max Frequency :
- 1MHz
- Seated Height-Max :
- 1 mm
- Height :
- 950μm
- Qualification Status :
- Not Qualified
- Number of Pins :
- 10
- JESD-609 Code :
- e3
- Shut Down Support :
- No
- Operating Supply Voltage :
- 5.5 V
- Current - Output / Channel :
- 70mA
- Unity Gain BW-Nom :
- 20000 kHz
- Surface Mount :
- yes
- Current - Input Bias :
- 5pA
- Mounting Type :
- Surface Mount
- ECCN Code :
- EAR99
- Mounting :
- Surface Mount
- Number of Terminations :
- 10
- RoHS :
- Details
- Product Status :
- Active
- Mounting Style :
- SMD/SMT
- Mount :
- Surface Mount
- Length :
- 3mm
- Low-Bias :
- yes
- Low-Offset :
- yes
- Power :
- No
- Common Mode Rejection Ratio :
- 65 dB
- Screening Level :
- Extended
- Series :
- mCal Technology
- Operating Temperature :
- -40°C~125°C
- Number of Channels per Chip :
- 2
- Package Shape :
- Square
- Output Current :
- 70mA
- Maximum Operating Supply Voltage :
- 5.5 V
- Supply Current-Max :
- 7.2 mA
- Supply Voltage :
- 2.5V
- RoHS Status :
- ROHS3 Compliant
- Terminal Pitch :
- 0.5mm
- HTS Code :
- 8542.33.00.01
- Voltage - Input Offset :
- 200μV
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Architecture :
- VOLTAGE-FEEDBACK
- Terminal Form :
- NO LEAD
- Power Supply Type :
- Single
- Programmable Power :
- No
- Terminal Position :
- Dual
- Input Offset Voltage-Max :
- 200 µV
- Datasheets
- MCP625-E/MF

2 Channels 70mA per Channel 5pA 65 dB Instrumentational OP Amps 0.005μA 5.5 V 2.5V~5.5V MCP625 10 Pins 10-VFDFN Exposed Pad
MCP625-E/MF Overview
In order to protect the op amps, a 10-VFDFN Exposed Pad case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 10. It consists of a total of 10 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. It has 10 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 200μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.5mA and 10 . Maintain 126dB as the voltage gain. In total, there are 2 circuits on this buffer amplifier. Buffer op amp is equipped with 2 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 5.5 V. This electronic part is recommended to be used with an 2.5mA supply for best performance. mCal Technology is the number that corresponds to the series of the buffer op amp. A minimum voltage gain of 25100 is the minimum voltage gain that this instrumentation amplifier is capable of producing. As part of this op amp ic, there are 10 terminals on which wires can be connected.
MCP625-E/MF Features
10 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
10Terminations
MCP625-E/MF Applications
There are a lot of Microchip Technology
MCP625-E/MF Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















