MCP624T-E/SL

Share

Or copy the link below:

Mfr.Part #
MCP624T-E/SL
Manufacturer
Microchip Technology
Package / Case
14-SOIC (0.154, 3.90mm Width)
Datasheet
Download
Description
IC OPAMP GP 4 CIRCUIT 14SOIC
Stock
38,309
In Stock :
38,309

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Microchip Technology
Product Category :
Instrumentation, OP Amps, Buffer Amps
Maximum Operating Supply Voltage :
5.5 V
Output Type :
Rail-to-Rail
HTS Code :
8542.39.00.01
Product Category :
Operational Amplifiers - Op Amps
Supplier Device Package :
14-SOIC
Surface Mount :
yes
Number of Elements :
4
Frequency Compensation :
yes
Number of Terminals :
14
Min Operating Temperature :
-40 °C
Terminal Pitch :
1.27mm
Number of Functions :
4
Common Mode Rejection Ratio :
65 dB
Base Product Number :
MCP624
Product :
Operational Amplifiers
Max Supply Voltage :
5.5 V
Supply Type :
Single
Gain Bandwidth Product :
20MHz
Number of Terminations :
14
Type :
General Purpose Amplifier
Product Status :
Active
Brand :
Microchip Technology
Terminal Position :
Dual
Voltage - Input Offset :
200μV
Product Type :
Op Amps - Operational Amplifiers
Number of Channels per Chip :
4
Low-Offset :
yes
Supply Voltage Limit-Max :
6.5V
Terminal Form :
Gull wing
Voltage - Supply, Single/Dual (±) :
2.5V~5.5V
Input Offset Voltage-Max :
200 µV
Power Supply Rejection Ratio (PSRR) :
61dB
Current - Input Bias :
5pA
Seated Height-Max :
1.75 mm
Voltage Gain-Min :
25110
Reach Compliance Code :
Compliant
Max Operating Temperature :
125 °C
Width :
3.9 mm
Input Offset Voltage (Vos) :
200μV
Mounting Style :
SMD/SMT
Pin Count :
14
Shutdown :
No Shutdown
Supply Voltage :
2.5V
Average Bias Current-Max (IIB) :
0.005μA
Terminal Finish :
Matte Tin (Sn) - annealed
Mounting :
Surface Mount
JESD-30 Code :
R-PDSO-G14
Published :
2011
Screening Level :
Extended
Nominal Supply Current :
2.5mA
JESD-609 Code :
e3
Peak Reflow Temperature (Cel) :
260
Current - Supply :
2.5mA
Number of Circuits :
4
Base Part Number :
MCP624
Number of Pins :
14
Voltage Gain :
126dB
Maximum Operating Temperature :
+ 125 C
Time@Peak Reflow Temperature-Max (s) :
40
Low-Bias :
yes
Current - Output / Channel :
70mA
Radiation Hardening :
No
Power Supplies :
3/5V
Qualification Status :
Not Qualified
Supplier Package :
SOIC N
Temperature Grade :
Automotive
Architecture :
VOLTAGE-FEEDBACK
RoHS Status :
ROHS3 Compliant
Slew Rate :
10V/μs
Min Supply Voltage :
2.5 V
Series :
mCal Technology
Mounting Type :
Surface Mount
Package / Case :
14-SOIC (0.154, 3.90mm Width)
Qualification :
AEC-Q100
Supply Current-Max :
14.4 mA
Input Bias Current :
5 pA
Package :
Tape and Reel (TR)
Operating Temperature :
-40°C~125°C
Output Current :
70mA
Manufacturer :
Microchip
Operating Supply Voltage :
5.25, 4.75, 5 V
Output Current per Channel :
70 mA
Packaging :
Tape and Reel (TR)
Minimum Operating Temperature :
- 40 C
Length :
8.65mm
Operating Supply Current :
2.5 mA
Factory Lead Time :
8 Weeks
Unity Gain BW-Nom :
20000 kHz
Moisture Sensitivity Level (MSL) :
1 (Unlimited)
Height Seated (Max) :
1.75mm
Number of Channels :
4
Mount :
Surface Mount
ECCN Code :
EAR99
Lifecycle Status :
Production (Last Updated: 2 years ago)
RoHS :
Compliant
Packing Method :
Tape and Reel
Amplifier Type :
GENERAL PURPOSE
Package Shape :
RECTANGULAR
Datasheets
MCP624T-E/SL
Introducing Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP624T-E/SL from Chip IC,where excellence meets affordability. This product stands out with its Number of Terminations:14, Type:General Purpose Amplifier, Base Part Number:MCP624, Number of Pins:14, Mounting Type:Surface Mount, Package / Case:14-SOIC (0.154, 3.90mm Width), Operating Temperature:-40°C~125°C, Number of Channels:4, MCP624T-E/SL pinout, MCP624T-E/SL datasheet PDF, MCP624T-E/SL amp .Beyond Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP624T-E/SL ,we also offer OP07CDR, TS321CX5 RFG, NE5532ADR, Our vast inventory has you covered. Contact us now for immediate solutions.

Microchip Technology MCP624T-E/SL


4 Channels 70 mA per Channel 5pA 65 dB Instrumentational OP Amps 0.005μA 5.25, 4.75, 5 V 2.5V~5.5V MCP624 14 Pins 14-SOIC (0.154, 3.90mm Width)

MCP624T-E/SL Overview


A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 14 terminations in the next few months. There are a total of 14 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 2.5V volts. There are 14 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 200μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 2.5 mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 4 circuits that are connected together. There are 4 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than -40 °C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 125 °C. There are a total of 4 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.25, 4.75, 5 V. The instrumentation amplifier is packed in the form of TAPE AND REEL. As a recommendation, this electronic component should be used with a power supply that can deliver 2.5mA. I would like to point out that this electrical component is capable of working from a voltage below 5.5 V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.5 V at all times. The mCal Technology indicates the series number of the op amp. There is a minimum voltage gain of 25110 that this buffer op amp is capable of conducting. In order to connect the buffer amplifier to the wires, it is equipped with 14 terminals.

MCP624T-E/SL Features


14 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
14Terminations


MCP624T-E/SL Applications


There are a lot of Microchip Technology
MCP624T-E/SL Instrumentational OP Amps applications.


  • Addition operation circuits
  • Subtraction operation circuits
  • single/dual op amp sum and difference circuits
  • Integrator circuits
  • Differentiator circuits
  • Logarithmic operation circuits
  • Exponential operation circuits
  • Multiplication circuits
  • Division circuits
  • Precision measurement
Purchase

You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • ROHM Semiconductor
    IC CMOS 2 CIRCUIT 8SOP
  • Diodes Incorporated
    IC OPAMP GP 1 CIRCUIT SOT25
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
  • Texas Instruments
    IC OPAMP GP 4 CIRCUIT 14SOIC
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
RFQ
BOM