MCP6241RT-E/OT
- Mfr.Part #
- MCP6241RT-E/OT
- Manufacturer
- Microchip Technology
- Package / Case
- SC-74A, SOT-753
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT SOT23-5
- Stock
- 36,205
- In Stock :
- 36,205
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Package Type :
- SOT-23
- Low-Offset :
- No
- Peak Reflow Temperature (Cel) :
- 260
- Power Supplies :
- 2/5 V
- Input Bias Current :
- 1 pA
- Package / Case :
- SC-74A, SOT-753
- Shut Down Support :
- No
- Maximum Operating Supply Voltage :
- 5.5 V
- Low-Bias :
- yes
- JESD-609 Code :
- e3
- Terminal Finish :
- Matte Tin (Sn)
- Operating Supply Current :
- 50 uA
- Mount :
- Surface Mount
- Surface Mount :
- yes
- Output Current :
- 23mA
- Max Supply Voltage :
- 5.5 V
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Slew Rate :
- 0.3V/µs
- Power :
- No
- Pin Count :
- 5
- Input Offset Voltage (Vos) :
- 5mV
- Power Supply Type :
- Single
- Packaging :
- Tape and Reel (TR)
- Supply Voltage Limit-Max :
- 7V
- Current - Supply :
- 50μA
- Temperature Grade :
- Automotive
- Lead Free :
- Lead Free
- Number of Terminations :
- 5
- Dimensions :
- 3.1 x 1.8 x 1.3mm
- Mounting Style :
- SMD/SMT
- Schedule B :
- 8542330000, 8542330000/8542330000, 8542330000/8542330000/8542330000, 8542330000/8542330000/8542330000/8542330000
- Qualification Status :
- Not Qualified
- RoHS Status :
- ROHS3 Compliant
- Mounting Type :
- Surface Mount
- Bandwidth :
- 550 kHz
- Base Product Number :
- MCP6241
- Length :
- 3.1mm
- Supplier Package :
- SOT-23
- Factory Lead Time :
- 14 Weeks
- Current - Input Bias :
- 1pA
- Operating Temperature :
- -40°C~125°C
- Manufacturer :
- Microchip
- Pbfree Code :
- yes
- Voltage Gain-Min :
- 31620
- Wideband :
- No
- Product Status :
- Active
- Product Type :
- Op Amps - Operational Amplifiers
- Voltage Gain dB :
- 110 dB
- Radiation Hardening :
- No
- Number of Terminals :
- 5
- Published :
- 2005
- Nominal Supply Current :
- 50μA
- Number of Channels :
- 1
- Package Shape :
- RECTANGULAR
- Height :
- 1.3mm
- Base Part Number :
- MCP6241
- Voltage Gain :
- 110dB
- Micropower :
- yes
- Mounting :
- Surface Mount
- Min Supply Voltage :
- 1.8 V
- Supply Type :
- Single
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V
- Qualification :
- AEC-Q100
- Max Operating Temperature :
- 125 °C
- Product Category :
- Operational Amplifiers - Op Amps
- Operating Supply Voltage :
- 5.5 V
- Maximum Operating Temperature :
- +125 °C
- Series :
- --
- Screening Level :
- Extended
- Product :
- Operational Amplifiers
- Supplier Device Package :
- SOT-23-5
- Gain Bandwidth Product :
- 550kHz
- Brand :
- Microchip Technology / Atmel
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Type :
- General Purpose Amplifier
- Shutdown :
- No Shutdown
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Output Current per Channel :
- 23 mA
- Output Type :
- Rail-to-Rail
- Terminal Position :
- Dual
- RoHS :
- Details
- Number of Amplifiers :
- 1
- Seated Height-Max :
- 1.45 mm
- Number of Elements :
- 1
- Packing Method :
- Tape and Reel
- Minimum Operating Temperature :
- -40 °C
- Number of Circuits :
- 1
- Number of Pins :
- 5
- Common Mode Rejection Ratio :
- 60 dB
- Reach Compliance Code :
- Compliant
- REACH SVHC :
- No SVHC
- Frequency Compensation :
- yes
- Amplifier Type :
- GENERAL PURPOSE
- Min Operating Temperature :
- -40 °C
- Supply Voltage :
- 5V
- Input Offset Voltage-Max :
- 7000 µV
- ECCN Code :
- EAR99
- Terminal Pitch :
- 0.95 mm
- Programmable Power :
- No
- Unity Gain BW-Nom :
- 550 kHz
- Supply Current-Max :
- 0.07 mA
- Architecture :
- VOLTAGE-FEEDBACK
- Current - Output / Channel :
- 23mA
- Voltage - Input Offset :
- 5mV
- Width :
- 1.8mm
- Number of Channels per Chip :
- 1
- Terminal Form :
- Gull wing
- HTS Code :
- 8542.33.00.01
- Rail to Rail :
- Rail to Rail Input/Output
- JESD-30 Code :
- R-PDSO-G5
- Number of Functions :
- 1
- Datasheets
- MCP6241RT-E/OT
MCP6241RT-E/OT Documents

1 Channels 23 mA per Channel 1pA 60 dB Instrumentational OP Amps 5.5 V 1.8V~5.5V MCP6241 5 Pins SC-74A, SOT-753
MCP6241RT-E/OT Overview
In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 5 terminations. A total of 5 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 5 pins on it. Op amp rates 5mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 50 uA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 110dB for the time being. A instrumentation amplifier like this has 1 circuits. On the buffer amps, there are 1 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 125 °C should not be used for the operation of buffer amplifier. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a recommendation that this electrical part be used with a supply with 50μA current rating. This electric component can work from a voltage of under 5.5 V as far as supply voltage is concerned. A voltage of 1.8 V or higher is recommended for the linear amplifier's supply voltage. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 31620. The buffer amplifier consists of 1 amplifiers. 5 wire terminals are provided on this op amp.
MCP6241RT-E/OT Features
5 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
5Terminations
MCP6241RT-E/OT Applications
There are a lot of Microchip Technology
MCP6241RT-E/OT Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















