MCP6241-E/P
- Mfr.Part #
- MCP6241-E/P
- Manufacturer
- Microchip Technology
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8DIP
- Stock
- 1,553
- In Stock :
- 1,553
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Functions :
- 1
- Max Input Voltage :
- 5.5V
- Min Supply Voltage :
- 1.8 V
- Nominal Supply Current :
- 50μA
- Lead Free :
- Lead Free
- JESD-609 Code :
- e3
- Amplifier Type :
- GENERAL PURPOSE
- Slew Rate :
- 0.3V/µs
- Number of Channels :
- 1
- Low-Bias :
- yes
- Package :
- Tube
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Output Current per Channel :
- 23 mA
- Supply Voltage Limit-Max :
- 7V
- Number of Pins :
- 8
- Programmable Power :
- No
- Number of Amplifiers :
- 1
- Pbfree Code :
- yes
- Current - Input Bias :
- 1pA
- REACH SVHC :
- No SVHC
- Input Offset Voltage :
- 5(mV)
- Product :
- Operational Amplifiers
- RoHS Status :
- ROHS3 Compliant
- Published :
- 2005
- Number of Channels per Chip :
- 1
- Supply Type :
- Single
- Number of Terminations :
- 8
- Voltage Gain :
- 110dB
- Supply Current-Max :
- 0.07 mA
- Surface Mount :
- No
- Supplier Device Package :
- 8-PDIP
- Supply Voltage :
- 5V
- Max Operating Temperature :
- 125 °C
- Operating Supply Current :
- 50 uA
- Voltage Gain-Min :
- 31620
- Min Operating Temperature :
- -40 °C
- Operating Temp Range :
- -40C to 125C
- Power Supply Rejection Ratio :
- 83(TYP)(dB)
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Output Type :
- Rail-to-Rail
- Wideband :
- No
- Architecture :
- VOLTAGE-FEEDBACK
- Temperature Grade :
- Automotive
- Gain Bandwidth Product :
- 550kHz
- Supplier Package :
- PDIP
- Length :
- 10.16mm
- Voltage Gain in dB :
- 110(dB)
- Power Supply Type :
- Single
- Frequency Compensation :
- yes
- Max Supply Voltage :
- 5.5 V
- Single Supply Voltage (Min) :
- 1.8(V)
- Product Status :
- Active
- Terminal Finish :
- Matte Tin (Sn)
- Bandwidth :
- 650 kHz
- Mounting Style :
- Through Hole
- Pin Count :
- 8
- Min Input Voltage :
- 1.8V
- Current - Output / Channel :
- 23mA
- Brand :
- Microchip Technology / Atmel
- Power :
- No
- Dual Supply Voltage (Max) :
- Not Required(V)
- Width :
- 7.112mm
- Product Category :
- Operational Amplifiers - Op Amps
- Unity Gain BW-Nom :
- 550 kHz
- Factory Lead Time :
- 12 Weeks
- Height :
- 4.953mm
- Mount :
- Through Hole
- Output Current :
- 23mA
- Seated Height-Max :
- 4.32 mm
- Operating Temperature Classification :
- Automotive
- RoHS :
- Details
- ECCN Code :
- EAR99
- Power Supply Requirement :
- Single
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Current - Supply :
- 50μA
- Single Supply Voltage (Typ) :
- 3/5(V)
- Input Bias Current :
- 0.001(nA)
- Maximum Operating Temperature :
- +125 °C
- Packaging :
- Tube
- Unity Gain Bandwidth Product :
- 0.55
- Terminal Pitch :
- 2.54mm
- Shutdown :
- No Shutdown
- Base Part Number :
- MCP6241
- Shut Down Feature :
- No
- Single Supply Voltage (Max) :
- 5.5(V)
- Operating Supply Voltage :
- 4.5, 5.5 V
- Number of Circuits :
- 1
- Mounting Type :
- Through Hole
- Series :
- --
- Mounting :
- Through Hole
- Package Type :
- PDIP
- Maximum Input Voltage :
- 5.5 V
- JESD-30 Code :
- R-PDIP-T8
- Common-mode Reject Ratio-Min :
- 60 dB
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V
- Input Offset Voltage-Max :
- 7000 µV
- Number of Terminals :
- 8
- Peak Reflow Temperature (Cel) :
- Not Applicable
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Voltage - Input Offset :
- 5mV
- Product Type :
- Op Amps - Operational Amplifiers
- Terminal Form :
- THROUGH-HOLE
- Common Mode Rejection Ratio :
- 60 dB
- Input Offset Voltage (Vos) :
- 5mV
- Package Shape :
- RECTANGULAR
- Type :
- General Purpose Amplifier
- Screening Level :
- Extended
- Rail to Rail :
- Rail to Rail Input/Output
- Micropower :
- yes
- Reach Compliance Code :
- Compliant
- Maximum Operating Supply Voltage :
- 5.5 V
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Rad Hardened :
- No
- Voltage Gain dB :
- 110 dB
- Input Voltage Range :
- 1.8 → 5.5 V
- Power Supplies :
- 2/5V
- Qualification Status :
- Not Qualified
- Dimensions :
- 9.27 x 6.35 x 3.3mm
- Radiation Hardening :
- No
- Operating Temperature :
- -40°C~125°C
- Low-Offset :
- No
- Qualification :
- AEC-Q100
- Minimum Operating Temperature :
- -40 °C
- Base Product Number :
- MCP6241
- Number of Elements :
- 1
- Max Frequency :
- 1kHz
- Dual Supply Voltage (Min) :
- Not Required(V)
- HTS Code :
- 8542.33.00.01
- Terminal Position :
- Dual
- Manufacturer :
- Microchip
- Datasheets
- MCP6241-E/P

1 Channels 23 mA per Channel 1pA 60 dB Instrumentational OP Amps 4.5, 5.5 V 1.8V~5.5V MCP6241 8 Pins 8-DIP (0.300, 7.62mm)
MCP6241-E/P Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. This is a General Purpose type op amp. Linear amplifier is delivered in a Tube case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 5V. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 5mV. Through Hole is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. This op amp can operate from a supply current at 50 uA. Voltage gain should remain at 110dB. There are 1 circuits on this op amp. The op amp ic has 1 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The temperature should not be lower than -40 °C for operational amplifier ics to operate. Use op amps only at temperatures no higher than 125 °C. This linear amplifier has a total of 1 elements. The operating supply voltage of the buffer op amp is rated at 4.5, 5.5 V. It is recommended that this electronic component be used with an 50µA supply. With regard to the supply voltage, this electrical component is capable of working from under 5.5 V. It is advised to keep the op amp's supply voltage higher than 1.8 V. -- corresponds to the op amp's series. The minimum voltage gain this buffer op amp is able to conduct is 31620. There are 1 amplifiers on the op amp. This buffer amplifier is equipped with terminals for wires.
MCP6241-E/P Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6241-E/P Applications
There are a lot of Microchip Technology
MCP6241-E/P Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















