MCP624-E/SL
- Mfr.Part #
- MCP624-E/SL
- Manufacturer
- Microchip Technology
- Package / Case
- 14-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14SOIC
- Stock
- 12,058
- In Stock :
- 12,058
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Voltage - Input Offset :
- 200μV
- REACH SVHC :
- No SVHC
- Supply Voltage Limit-Max :
- 6.5V
- Product Type :
- Op Amps - Operational Amplifiers
- Qualification :
- AEC-Q100
- Nominal Supply Current :
- 2.5mA
- Factory Lead Time :
- 8 Weeks
- RoHS Status :
- ROHS3 Compliant
- Lead Free :
- Lead Free
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Operating Temperature :
- -40°C~125°C
- Current - Output / Channel :
- 70mA
- Number of Amplifiers :
- 4
- Package / Case :
- 14-SOIC (0.154, 3.90mm Width)
- Low-Bias :
- yes
- Length :
- 8.5598mm
- Packaging :
- Tube
- Shut Down Support :
- No
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Number of Elements :
- 4
- Terminal Pitch :
- 1.27mm
- Base Product Number :
- MCP624
- Supplier Package :
- SOIC N
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Average Bias Current-Max (IIB) :
- 0.005μA
- ECCN Code :
- EAR99
- Gain Bandwidth Product :
- 20MHz
- Output Current :
- 70mA
- Bandwidth :
- 20 MHz
- Input Offset Voltage (Vos) :
- 200μV
- Number of Channels per Chip :
- 4
- Screening Level :
- Extended
- Mount :
- Surface Mount
- Terminal Position :
- Dual
- Operating Supply Voltage :
- 2.65, 5.5 V
- Width :
- 3.9116mm
- Mounting Type :
- Surface Mount
- Min Operating Temperature :
- -40 °C
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Product Status :
- Active
- Peak Reflow Temperature (Cel) :
- 260
- Max Operating Temperature :
- 125 °C
- Shutdown :
- No Shutdown
- Frequency Compensation :
- yes
- Manufacturer :
- Microchip
- Brand :
- Microchip Technology
- Published :
- 2011
- Number of Circuits :
- 4
- Output Type :
- Rail-to-Rail
- Current - Input Bias :
- 5pA
- Unity Gain BW-Nom :
- 20000 kHz
- Supply Voltage :
- 2.5V
- Common Mode Rejection Ratio :
- 65 dB
- Number of Pins :
- 14
- Voltage Gain :
- 126dB
- Time@Peak Reflow Temperature-Max (s) :
- 40
- JESD-609 Code :
- e3
- Type :
- General Purpose Amplifier
- Package :
- Tube
- Low-Offset :
- yes
- Number of Channels :
- 4
- RoHS :
- Compliant
- Series :
- mCal Technology
- Slew Rate :
- 10V/μs
- Power Supply Type :
- Single
- Product Category :
- Operational Amplifiers - Op Amps
- Current - Supply :
- 2.5mA
- Radiation Hardening :
- No
- Minimum Operating Temperature :
- - 40 C
- Input Bias Current :
- 5 pA
- Operating Supply Current :
- 2.5 mA
- Amplifier Type :
- GENERAL PURPOSE
- Base Part Number :
- MCP624
- Height :
- 1.2446mm
- Product :
- Operational Amplifiers
- Output Current per Channel :
- 70 mA
- Number of Terminations :
- 14
- Max Supply Voltage :
- 5.5 V
- Maximum Operating Supply Voltage :
- 5.5 V
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Architecture :
- VOLTAGE-FEEDBACK
- Power Supplies :
- 3/5V
- Supplier Device Package :
- 14-SOIC
- Min Supply Voltage :
- 2.5 V
- Number of Functions :
- 4
- Pin Count :
- 14
- Supply Type :
- Single
- Terminal Form :
- Gull wing
- Maximum Operating Temperature :
- + 125 C
- Mounting :
- Surface Mount
- Mounting Style :
- SMD/SMT
- Datasheets
- MCP624-E/SL

4 Channels 70 mA per Channel 5pA 65 dB Instrumentational OP Amps 0.005μA 2.65, 5.5 V 2.5V~5.5V MCP624 14 Pins 14-SOIC (0.154, 3.90mm Width)
MCP624-E/SL Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 200μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.5 mA and 10 . Maintain 126dB as the voltage gain. In total, there are 4 circuits on this buffer amplifier. Buffer op amp is equipped with 4 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is recommended that the temperature of this op amp ic should not fall below -40 °C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 125 °C degrees. As a whole, there are 4 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 2.65, 5.5 V. This electronic part is recommended to be used with an 2.5mA supply for best performance. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 5.5 V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.5 V when using it. mCal Technology is the number that corresponds to the series of the buffer op amp. A linear amplifier such as this has 4 amplifiers on it.
MCP624-E/SL Features
14 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
MCP624-E/SL Applications
There are a lot of Microchip Technology
MCP624-E/SL Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















