MCP623T-E/CHY
- Mfr.Part #
- MCP623T-E/CHY
- Manufacturer
- Microchip Technology
- Package / Case
- SOT-23-6
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT SOT23-6
- Stock
- 2,388
- In Stock :
- 2,388
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Current - Output / Channel :
- 70mA
- Average Bias Current-Max (IIB) :
- 0.005μA
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Bandwidth :
- 20MHz
- HTS Code :
- 8542.33.00.01
- Operating Supply Voltage :
- 5.5, 1.8 V
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Series :
- mCal Technology
- Power Supply Type :
- Single
- Number of Pins :
- 6
- Output Current :
- 70mA
- Gain Bandwidth Product :
- 20MHz
- RoHS :
- Details
- Amplifier Type :
- GENERAL PURPOSE
- Supplier Package :
- SOT-23
- Qualification :
- AEC-Q100
- Number of Channels :
- 1
- Number of Functions :
- 1
- Number of Channels per Chip :
- 1
- Product Category :
- Operational Amplifiers - Op Amps
- Published :
- 2010
- Voltage - Input Offset :
- 200μV
- Product Type :
- Op Amps - Operational Amplifiers
- Package / Case :
- SOT-23-6
- Height :
- 1.3mm
- Nominal Supply Current :
- 2.5mA
- Number of Terminals :
- 6
- Base Product Number :
- MCP623
- Supply Voltage :
- 2.5V
- Brand :
- Microchip Technology
- Current - Supply :
- 2.5mA
- Radiation Hardening :
- No
- Voltage Gain :
- 126dB
- Supplier Device Package :
- SOT-23-6
- Slew Rate :
- 10V/μs
- Mount :
- Surface Mount
- Terminal Position :
- Dual
- Packaging :
- Tape and Reel (TR)
- Manufacturer :
- Microchip
- Surface Mount :
- yes
- Supply Type :
- Single
- Number of Terminations :
- 6
- Type :
- General Purpose Amplifier
- Shutdown :
- No Shutdown
- Maximum Operating Temperature :
- + 125 C
- ECCN Code :
- EAR99
- Unity Gain BW-Nom :
- 20000 kHz
- Shut Down Support :
- No
- Number of Circuits :
- 1
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Reach Compliance Code :
- Compliant
- Base Part Number :
- MCP623
- Operating Supply Current :
- 2.5 mA
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Length :
- 3.1mm
- JESD-609 Code :
- e4
- Width :
- 1.8mm
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Terminal Pitch :
- 0.95mm
- Operating Temperature :
- -40°C~125°C
- RoHS Status :
- ROHS3 Compliant
- REACH SVHC :
- No SVHC
- Terminal Form :
- Gull wing
- Mounting Type :
- Surface Mount
- Output Current per Channel :
- 70 mA
- Supply Voltage Limit-Max :
- 6.5 V
- Temperature Grade :
- Automotive
- Seated Height-Max :
- 1.45 mm
- Peak Reflow Temperature (Cel) :
- 260
- Input Offset Voltage (Vos) :
- 200μV
- Qualification Status :
- Not Qualified
- Mounting :
- Surface Mount
- Factory Lead Time :
- 9 Weeks
- Minimum Operating Temperature :
- - 40 C
- Lead Free :
- Lead Free
- Output Type :
- Rail-to-Rail
- Product :
- Operational Amplifiers
- Current - Input Bias :
- 5pA
- Pin Count :
- 6
- Screening Level :
- Extended
- Input Offset Voltage-Max :
- 200 µV
- Common Mode Rejection Ratio :
- 65 dB
- Mounting Style :
- SMD/SMT
- Product Status :
- Active
- JESD-30 Code :
- R-PDSO-G6
- Package Shape :
- RECTANGULAR
- Datasheets
- MCP623T-E/CHY
MCP623T-E/CHY Documents

1 Channels 70 mA per Channel 5pA 65 dB Instrumentational OP Amps 0.005μA 5.5, 1.8 V 2.5V~5.5V MCP623 6 Pins SOT-23-6
MCP623T-E/CHY Overview
In order to protect the op amps, a SOT-23-6 case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 6. It consists of a total of 6 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. It has 6 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 200μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.5 mA and 10 . Maintain 126dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. Buffer op amp is equipped with 1 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 5.5, 1.8 V. This electronic part is recommended to be used with an 2.5mA supply for best performance. mCal Technology is the number that corresponds to the series of the buffer op amp. As part of this op amp ic, there are 6 terminals on which wires can be connected.
MCP623T-E/CHY Features
6 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
6Terminations
MCP623T-E/CHY Applications
There are a lot of Microchip Technology
MCP623T-E/CHY Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















