MCP6234-E/ST
- Mfr.Part #
- MCP6234-E/ST
- Manufacturer
- Microchip Technology
- Package / Case
- 14-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14TSSOP
- Stock
- 20,913
- In Stock :
- 20,913
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Output Current :
- 23mA
- Qualification Status :
- Not Qualified
- Manufacturer :
- Microchip
- Shutdown :
- No Shutdown
- Peak Reflow Temperature (Cel) :
- 260
- Supplier Device Package :
- 14-TSSOP
- Input Offset Voltage-Max :
- 7000 µV
- Low-Bias :
- yes
- Number of Elements :
- 4
- Amplifier Type :
- GENERAL PURPOSE
- Micropower :
- yes
- Factory Lead Time :
- 13 Weeks
- Input Bias Current :
- 1 pA
- Gain Bandwidth Product :
- 300kHz
- Max Supply Voltage :
- 6 V
- Bandwidth :
- 300 kHz
- Product Status :
- Active
- Supply Current-Max :
- 0.12 mA
- Operating Supply Current :
- 20 uA
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Seated Height-Max :
- 1.2 mm
- Temperature Grade :
- Automotive
- JESD-30 Code :
- R-PDSO-G14
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Package / Case :
- 14-TSSOP (0.173, 4.40mm Width)
- Number of Circuits :
- 4
- ECCN Code :
- EAR99
- Terminal Form :
- Gull wing
- Input Offset Voltage (Vos) :
- 5mV
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Slew Rate :
- 0.15V/µs
- Power Supply Type :
- Single
- Frequency Compensation :
- yes
- Package Shape :
- RECTANGULAR
- REACH SVHC :
- No SVHC
- Voltage - Input Offset :
- 5mV
- Operating Supply Voltage :
- 5.5V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Current - Supply :
- 20μA
- Mounting Type :
- Surface Mount
- Brand :
- Microchip Technology
- Minimum Operating Temperature :
- - 40 C
- Terminal Position :
- Dual
- Low-Offset :
- No
- Supply Voltage Limit-Max :
- 7V
- Supply Type :
- Single
- Width :
- 4.4mm
- Shut Down Support :
- No
- Radiation Hardening :
- No
- Mounting Style :
- SMD/SMT
- Current - Output / Channel :
- 23mA
- Voltage Gain-Min :
- 31620
- Nominal Supply Current :
- 20μA
- Supplier Package :
- TSSOP
- Number of Terminals :
- 14
- Power Supplies :
- 2/5V
- Packaging :
- Tube
- Lead Free :
- Lead Free
- Min Supply Voltage :
- 1.8 V
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Mounting :
- Surface Mount
- Length :
- 5mm
- Published :
- 2015
- Common Mode Rejection Ratio :
- 61 dB
- Base Part Number :
- MCP6234
- Contact Plating :
- Tin
- RoHS :
- Details
- Product :
- Operational Amplifiers
- Output Type :
- Rail-to-Rail
- Supply Voltage :
- 5V
- Base Product Number :
- MCP6234
- Mount :
- Surface Mount
- Product Type :
- Op Amps - Operational Amplifiers
- Min Operating Temperature :
- -40 °C
- Qualification :
- AEC-Q100
- Number of Terminations :
- 14
- RoHS Status :
- ROHS3 Compliant
- Pin Count :
- 14
- Architecture :
- VOLTAGE-FEEDBACK
- Average Bias Current-Max (IIB) :
- 0.0011μA
- Schedule B :
- 8542330000, 8542330000/8542330000/8542330000/8542330000/8542330000
- Series :
- --
- Maximum Operating Temperature :
- + 125 C
- Operating Temperature :
- -40°C~125°C
- Voltage Gain :
- 110dB
- Unity Gain BW-Nom :
- 300 kHz
- Number of Functions :
- 4
- Number of Amplifiers :
- 4
- Power Supply Rejection Ratio (PSRR) :
- 83dB
- HTS Code :
- 8542.33.00.01
- Surface Mount :
- yes
- Number of Pins :
- 14
- Terminal Pitch :
- 0.65 mm
- Voltage Gain dB :
- 110 dB
- Current - Input Bias :
- 1pA
- JESD-609 Code :
- e3
- Type :
- General Purpose Amplifier
- Package :
- Tube
- Reach Compliance Code :
- Compliant
- Max Operating Temperature :
- 125 °C
- Number of Channels :
- 4
- Pbfree Code :
- yes
- Output Current per Channel :
- 23 mA
- Maximum Operating Supply Voltage :
- 6 V
- Number of Channels per Chip :
- 4
- Height :
- 900μm
- Product Category :
- Operational Amplifiers - Op Amps
- Datasheets
- MCP6234-E/ST

4 Channels 23 mA per Channel 1pA 61 dB Instrumentational OP Amps 0.0011μA 5.5V 1.8V~6V MCP6234 14 Pins 14-TSSOP (0.173, 4.40mm Width)
MCP6234-E/ST Overview
Packaged in a 14-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 14. The pins on this board total to 14 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 5mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 20 uA, this op amp ic can operate. 110dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 4 circuits. As far as the device is concerned, buffer amplifier has 4 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For the buffer op amp to operate properly, it must be above the temperature of -40 °C degrees Celsius. No temperature greater than 125 °C should be used. The linear amplifier consists of 4 different elements in total. The operating supply voltage of the buffer op amp is rated at 5.5V. As a result, it is recommended that a power supply of 20μA be used with this electronic part. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 6 V. A high supply voltage of more than 1.8 V is recommended for the instrumentation amplifier's supply voltage. As the name implies, -- refers to the series of the buffer op amp. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 31620. A total of 4 instrumentation amplifiers are present on the device. The buffer op amp is equipped with 14 terminals for attaching wires to it.
MCP6234-E/ST Features
14 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
14Terminations
MCP6234-E/ST Applications
There are a lot of Microchip Technology
MCP6234-E/ST Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















