MCP6232T-E/SN

Share

Or copy the link below:

Mfr.Part #
MCP6232T-E/SN
Manufacturer
Microchip Technology
Package / Case
8-SOIC (0.154, 3.90mm Width)
Datasheet
Download
Description
IC OPAMP GP 2 CIRCUIT 8SOIC
Stock
10,600
In Stock :
10,600

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Microchip Technology
Product Category :
Instrumentation, OP Amps, Buffer Amps
Seated Height-Max :
1.75 mm
Moisture Sensitivity Level (MSL) :
1 (Unlimited)
Current - Output / Channel :
23 mA
Frequency Compensation :
yes
Mount :
Surface Mount
Maximum Operating Supply Voltage :
6 V
Manufacturer :
Microchip
Max Operating Temperature :
125 °C
Input Bias Current :
1 pA
Height Seated (Max) :
1.75mm
Length :
4.9mm
Peak Reflow Temperature (Cel) :
260
Micropower :
yes
Supplier Device Package :
8-SOIC
Mounting Type :
Surface Mount
Power Supplies :
2/5 V
Number of Channels per Chip :
2
Supply Voltage :
5V
Packing Method :
Tape and Reel
Base Part Number :
MCP6232
Number of Functions :
2
JESD-30 Code :
R-PDSO-G8
Operating Temperature :
-40°C~125°C
Temperature Grade :
Automotive
Amplifier Type :
GENERAL PURPOSE
Terminal Position :
Dual
Number of Pins :
8
Low-Offset :
No
Width :
3.9 mm
Voltage - Supply, Single/Dual (±) :
1.8V~6V
Min Operating Temperature :
-40 °C
Max Supply Voltage :
6 V
Mounting Style :
SMD/SMT
Qualification Status :
Not Qualified
Product Status :
Active
Output Current :
23mA
Supply Voltage Limit-Max :
7V
Minimum Operating Temperature :
- 40 C
Input Offset Voltage-Max :
7000 µV
Voltage Gain :
110dB
Supply Current-Max :
0.06 mA
Product :
Operational Amplifiers
Slew Rate :
0.15V/µs
Nominal Supply Current :
20μA
Series :
MCP6232
Height :
1.25 mm (Min)
Packaging :
Tape and Reel (TR)
Maximum Operating Temperature :
+ 125 C
Supply Type :
Single
Factory Lead Time :
10 Weeks
Number of Elements :
2
ECCN Code :
EAR99
Number of Terminations :
8
Operating Supply Voltage :
5.5V
Common Mode Rejection Ratio :
61 dB
Average Bias Current-Max (IIB) :
0.0011μA
Terminal Finish :
Matte Tin (Sn) - annealed
Radiation Hardening :
No
Gain Bandwidth Product :
300 kHz
Output Type :
Rail-to-Rail
HTS Code :
8542.33.00.01
Product Type :
Op Amps - Operational Amplifiers
Input Offset Voltage (Vos) :
5mV
Voltage Gain-Min :
31620
Output Current per Channel :
23mA
Number of Channels :
2
Min Supply Voltage :
1.8 V
Lifecycle Status :
Production (Last Updated: 2 years ago)
Package Shape :
RECTANGULAR
Pin Count :
8
MSL :
MSL 2 - 1 year
Qualification :
AEC-Q100
Brand :
Microchip Technology / Atmel
Shutdown :
No Shutdown
Base Product Number :
MCP6232
Pbfree Code :
yes
Reach Compliance Code :
Compliant
Operating Supply Current :
20μA
Terminal Pitch :
1.27 mm
Current - Supply :
20µA (x2 Channels)
JESD-609 Code :
e3
Terminal Form :
Gull wing
Current - Input Bias :
1pA
Type :
General Purpose Amplifier
Surface Mount :
yes
Bandwidth :
300 kHz
Product Category :
Operational Amplifiers - Op Amps
Mounting :
Surface Mount
Published :
2004
Number of Terminals :
8
Package :
Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
Lead Free :
Lead Free
Voltage - Input Offset :
5 mV
Unity Gain BW-Nom :
300 kHz
Time@Peak Reflow Temperature-Max (s) :
40
Number of Circuits :
2
Schedule B :
8542330000
Package / Case :
8-SOIC (0.154, 3.90mm Width)
Voltage Gain dB :
110 dB
RoHS Status :
ROHS3 Compliant
Supplier Package :
SOIC N
RoHS :
Compliant
Architecture :
VOLTAGE-FEEDBACK
Low-Bias :
yes
Datasheets
MCP6232T-E/SN
Introducing Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP6232T-E/SN from Chip IC,where excellence meets affordability. This product stands out with its Mounting Type:Surface Mount, Base Part Number:MCP6232, Operating Temperature:-40°C~125°C, Number of Pins:8, Number of Terminations:8, Number of Channels:2, Type:General Purpose Amplifier, Bandwidth:300 kHz, Package / Case:8-SOIC (0.154, 3.90mm Width), MCP6232T-E/SN pinout, MCP6232T-E/SN datasheet PDF, MCP6232T-E/SN amp .Beyond Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP6232T-E/SN ,we also offer OP07CDR, TS321CX5 RFG, NE5532ADR, Our vast inventory has you covered. Contact us now for immediate solutions.

Microchip Technology MCP6232T-E/SN


2 Channels 23mA per Channel 1pA 61 dB Instrumentational OP Amps 0.0011μA 5.5V 1.8V~6V MCP6232 8 Pins 8-SOIC (0.154, 3.90mm Width)

MCP6232T-E/SN Overview


Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 5mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 20μA, this op amp ic can operate. 110dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 2 circuits. As far as the device is concerned, buffer amplifier has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For the buffer op amp to operate properly, it must be above the temperature of -40 °C degrees Celsius. No temperature greater than 125 °C should be used. The linear amplifier consists of 2 different elements in total. The operating supply voltage of the buffer op amp is rated at 5.5V. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. As a result, it is recommended that a power supply of 20µA (x2 Channels) be used with this electronic part. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 6 V. A high supply voltage of more than 1.8 V is recommended for the instrumentation amplifier's supply voltage. As the name implies, MCP6232 refers to the series of the buffer op amp. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 31620. The buffer op amp is equipped with 8 terminals for attaching wires to it.

MCP6232T-E/SN Features


8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
8Terminations


MCP6232T-E/SN Applications


There are a lot of Microchip Technology
MCP6232T-E/SN Instrumentational OP Amps applications.


  • Integrator circuits
  • Differentiator circuits
  • Logarithmic operation circuits
  • Exponential operation circuits
  • Multiplication circuits
  • Division circuits
  • Precision measurement
  • Power control
  • Information processing
  • Weak signal detection
Purchase

You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • ROHM Semiconductor
    IC CMOS 2 CIRCUIT 8SOP
  • Diodes Incorporated
    IC OPAMP GP 1 CIRCUIT SOT25
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
  • Texas Instruments
    IC OPAMP GP 4 CIRCUIT 14SOIC
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
RFQ
BOM