MCP622-E/SN
- Mfr.Part #
- MCP622-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 38
- In Stock :
- 38
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Packaging :
- Tube
- Screening Level :
- Extended
- Voltage Gain :
- 126dB
- Power Supplies :
- 3/5V
- Mounting :
- Surface Mount
- Current - Supply :
- 2.5mA
- Voltage Gain-Min :
- 25100
- Input Bias Current :
- 5 pA
- Architecture :
- VOLTAGE-FEEDBACK
- Terminal Position :
- Dual
- Maximum Operating Supply Voltage :
- 5.5 V
- REACH SVHC :
- No SVHC
- RoHS Status :
- ROHS3 Compliant
- Number of Functions :
- 2
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Terminal Form :
- Gull wing
- Shutdown :
- No Shutdown
- HTS Code :
- 8542.33.00.01
- Power :
- No
- Mounting Type :
- Surface Mount
- Radiation Hardening :
- No
- Low-Bias :
- yes
- Current - Output / Channel :
- 70mA
- Voltage - Input Offset :
- 200μV
- Series :
- mCal Technology
- Supplier Device Package :
- 8-SOIC
- Unity Gain BW-Nom :
- 20000 kHz
- Input Offset Voltage (Vos) :
- 200μV
- Pbfree Code :
- yes
- Amplifier Type :
- GENERAL PURPOSE
- Supply Current-Max :
- 7.2 mA
- Supply Type :
- Single
- Number of Terminals :
- 8
- Micropower :
- No
- Common Mode Rejection Ratio :
- 65 dB
- Low-Offset :
- yes
- Package :
- Tube
- Surface Mount :
- yes
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Minimum Operating Temperature :
- - 40 C
- Slew Rate :
- 10V/μs
- Bandwidth :
- 20MHz
- JESD-30 Code :
- R-PDSO-G8
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Operating Supply Voltage :
- 5.5 V
- Terminal Pitch :
- 1.27 mm
- Brand :
- Microchip Technology / Atmel
- Number of Terminations :
- 8
- Mounting Style :
- SMD/SMT
- Base Product Number :
- MCP622
- Current - Input Bias :
- 5pA
- Supply Voltage :
- 2.5V
- Lead Free :
- Lead Free
- Min Operating Temperature :
- -40 °C
- Power Supply Type :
- Single
- Shut Down Support :
- No
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Factory Lead Time :
- 8 Weeks
- Max Operating Temperature :
- 125 °C
- Reach Compliance Code :
- Compliant
- Number of Channels per Chip :
- 2
- Gain Bandwidth Product :
- 20MHz
- Product Type :
- Op Amps - Operational Amplifiers
- Min Supply Voltage :
- 2.5 V
- Voltage Gain dB :
- 126 dB
- Length :
- 4.9mm
- Operating Supply Current :
- 2.5mA
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- MSL :
- MSL 1 - Unlimited
- Package Shape :
- RECTANGULAR
- Temperature Grade :
- Automotive
- Product :
- Operational Amplifiers
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Frequency Compensation :
- yes
- Seated Height-Max :
- 1.75 mm
- ECCN Code :
- EAR99
- Average Bias Current-Max (IIB) :
- 0.005μA
- Published :
- 2000
- Output Current per Channel :
- 70mA
- Output Current :
- 70mA
- Number of Amplifiers :
- 2
- Manufacturer :
- Microchip
- Number of Pins :
- 8
- Output Type :
- Rail-to-Rail
- Number of Circuits :
- 2
- Maximum Operating Temperature :
- + 125 C
- Pin Count :
- 8
- Nominal Supply Current :
- 2.5mA
- JESD-609 Code :
- e3
- Qualification :
- AEC-Q100
- Input Offset Voltage-Max :
- 200 µV
- Type :
- General Purpose Amplifier
- Base Part Number :
- MCP622
- Product Status :
- Active
- Max Supply Voltage :
- 5.5 V
- Programmable Power :
- No
- Supplier Package :
- SOIC N
- Width :
- 3.9mm
- Peak Reflow Temperature (Cel) :
- 260
- Operating Temperature :
- -40°C~125°C
- Supply Voltage Limit-Max :
- 6.5V
- RoHS :
- Details
- Product Category :
- Operational Amplifiers - Op Amps
- Wideband :
- No
- Height :
- 1.25mm
- Qualification Status :
- Not Qualified
- Number of Elements :
- 2
- Mount :
- Surface Mount
- Number of Channels :
- 2
- Datasheets
- MCP622-E/SN

2 Channels 70mA per Channel 5pA 65 dB Instrumentational OP Amps 0.005μA 5.5 V 2.5V~5.5V MCP622 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP622-E/SN Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. Linear amplifier is delivered in a Tube case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 2.5V. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 200μV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. This op amp can operate from a supply current at 2.5mA. Voltage gain should remain at 126dB. There are 2 circuits on this op amp. The op amp ic has 2 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The temperature should not be lower than -40 °C for operational amplifier ics to operate. Use op amps only at temperatures no higher than 125 °C. This linear amplifier has a total of 2 elements. The operating supply voltage of the buffer op amp is rated at 5.5 V. It is recommended that this electronic component be used with an 2.5mA supply. With regard to the supply voltage, this electrical component is capable of working from under 5.5 V. It is advised to keep the op amp's supply voltage higher than 2.5 V. mCal Technology corresponds to the op amp's series. The minimum voltage gain this buffer op amp is able to conduct is 25100. There are 2 amplifiers on the op amp. This buffer amplifier is equipped with terminals for wires.
MCP622-E/SN Features
8 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP622-E/SN Applications
There are a lot of Microchip Technology
MCP622-E/SN Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















