MCP618-I/SN
- Mfr.Part #
- MCP618-I/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 524
- In Stock :
- 524
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Amplifiers :
- 1
- Surface Mount :
- yes
- Screening Level :
- Industrial
- Voltage Gain dB :
- 120 dB
- Power :
- No
- Output Current per Channel :
- 17mA
- Low-Offset :
- yes
- Supply Voltage Limit-Max :
- 7V
- Series :
- --
- Terminal Finish :
- Matte Tin (Sn)
- Qualification :
- AEC-Q100
- Wideband :
- No
- Number of Circuits :
- 1
- Lead Free :
- Lead Free
- Supply Current-Max :
- 0.025 mA
- Operating Temperature :
- -40°C~85°C
- Output Type :
- Rail-to-Rail
- Number of Elements :
- 1
- Package :
- Tube
- JESD-30 Code :
- R-PDSO-G8
- Input Offset Voltage-Max :
- 150 µV
- Operating Supply Current :
- 19μA
- Voltage Gain-Min :
- 56200
- Low-Bias :
- No
- Voltage - Input Offset :
- 150μV
- Base Part Number :
- MCP618
- Slew Rate :
- 0.08V/µs
- Supply Voltage :
- 5V
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Gain Bandwidth Product :
- 190kHz
- JESD-609 Code :
- e3
- Current - Output / Channel :
- 17mA
- Supply Type :
- Single
- Height :
- 1.5mm
- Current - Input Bias :
- 15nA
- Brand :
- Microchip Technology
- Product Status :
- Active
- Terminal Form :
- Gull wing
- Qualification Status :
- Not Qualified
- Number of Functions :
- 1
- Published :
- 2001
- Number of Terminals :
- 8
- REACH SVHC :
- No SVHC
- Micropower :
- yes
- Amplifier Type :
- GENERAL PURPOSE
- Architecture :
- VOLTAGE-FEEDBACK
- Number of Terminations :
- 8
- Output Current :
- 17mA
- Power Supplies :
- 2.5/5V
- Peak Reflow Temperature (Cel) :
- 260
- Radiation Hardening :
- No
- Mounting :
- Surface Mount
- Common Mode Rejection Ratio :
- 80 dB
- Min Operating Temperature :
- -40 °C
- Frequency Compensation :
- yes
- Mounting Type :
- Surface Mount
- HTS Code :
- 8542.33.00.01
- Product Category :
- Operational Amplifiers - Op Amps
- Number of Channels per Chip :
- 1
- Maximum Operating Temperature :
- + 85 C
- Max Supply Voltage :
- 5.5 V
- Factory Lead Time :
- 10 Weeks
- Bandwidth :
- 190 kHz
- Shutdown :
- No Shutdown
- Reach Compliance Code :
- Compliant
- Pin Count :
- 8
- Voltage Gain :
- 120dB
- Minimum Operating Temperature :
- - 40 C
- Mounting Style :
- SMD/SMT
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Length :
- 4.9mm
- Width :
- 3.9mm
- Operating Supply Voltage :
- 5.5 V
- Max Operating Temperature :
- 85 °C
- Power Supply Rejection Ratio (PSRR) :
- 86dB
- Current - Supply :
- 19μA
- Maximum Operating Supply Voltage :
- 5.5 V
- ECCN Code :
- EAR99
- Input Bias Current :
- 5 nA
- Supplier Device Package :
- 8-SOIC
- Temperature Grade :
- Industrial
- Type :
- General Purpose Amplifier
- Nominal Supply Current :
- 19μA
- Unity Gain BW-Nom :
- 190 kHz
- Manufacturer :
- Microchip
- Product Type :
- Op Amps - Operational Amplifiers
- Shut Down Support :
- No
- Power Supply Type :
- Single
- Seated Height-Max :
- 1.75 mm
- Number of Pins :
- 8
- Number of Channels :
- 1
- Packaging :
- Tube
- Average Bias Current-Max (IIB) :
- 0.005μA
- Bias Current-Max (IIB) @25C :
- 0.005μA
- Supplier Package :
- SOIC N
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Mount :
- Surface Mount
- Min Supply Voltage :
- 2.3 V
- Input Offset Voltage (Vos) :
- 150μV
- Pbfree Code :
- yes
- RoHS Status :
- ROHS3 Compliant
- Terminal Pitch :
- 1.27 mm
- Base Product Number :
- MCP618
- Package Shape :
- RECTANGULAR
- Voltage - Supply, Single/Dual (±) :
- 2.3V~5.5V
- RoHS :
- Compliant
- Terminal Position :
- Dual
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Product :
- Operational Amplifiers
- Datasheets
- MCP618-I/SN

1 Channels 17mA per Channel 15nA 80 dB Instrumentational OP Amps 0.005μA 5.5 V 2.3V~5.5V MCP618 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP618-I/SN Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 150μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 19μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 120dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This instrumentation amplifier cannot operate below -40 °C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85 °C. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. For optimal performance, this electrical part should be connected to a supply with a current of 19µA. It is important to keep in mind that the power supply voltage of this electric component is below 5.5 V, which is suitable. Keeping the linear amplifier's supply voltage above 2.3 V is recommended. Buffer op amp series numbers are indicated by the --. This op amp ic can conduct a minimum voltage gain of 56200. The linear amplifier has 1 amplifiers. There are 8 wire terminals on this op amp ic.
MCP618-I/SN Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP618-I/SN Applications
There are a lot of Microchip Technology
MCP618-I/SN Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















