MCP617-I/SN
- Mfr.Part #
- MCP617-I/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8SOIC
- Stock
- 43,416
- In Stock :
- 43,416
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Voltage - Input Offset :
- 150μV
- Number of Terminations :
- 8
- Bandwidth :
- 190 kHz
- Product Type :
- Op Amps - Operational Amplifiers
- Number of Terminals :
- 8
- RoHS Status :
- ROHS3 Compliant
- Rail to Rail :
- Rail to Rail Output
- Power Supplies :
- 2.5/5 V
- Number of Circuits :
- 2
- Pin Count :
- 8
- Shut Down Support :
- No
- Single Supply Voltage (Typ) :
- 3/5(V)
- Supply Voltage :
- 5V
- Power Supply Requirement :
- Single
- Length :
- 4.9mm
- Voltage Gain in dB :
- 120(dB)
- Mounting :
- Surface Mount
- Package :
- Tube
- Screening Level :
- Industrial
- Minimum Operating Temperature :
- -40 °C
- Current - Supply :
- 19μA
- RoHS :
- Compliant
- Brand :
- Microchip Technology / Atmel
- Voltage Gain-Min :
- 56200
- Mounting Type :
- Surface Mount
- Temperature Grade :
- Industrial
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Input Offset Voltage (Vos) :
- 150μV
- Power Supply Rejection Ratio :
- 86(dB)
- Terminal Finish :
- Matte Tin (Sn)
- Common Mode Rejection Ratio :
- 80 dB
- Unity Gain Bandwidth Product :
- 0.19
- Bias Current-Max (IIB) @25C :
- 0.005μA
- Series :
- --
- Nominal Supply Current :
- 19μA
- Input Offset Voltage :
- 0.15(mV)
- Qualification :
- AEC-Q100
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Dual Supply Voltage (Min) :
- Not Required(V)
- Type :
- General Purpose Amplifier
- Reach Compliance Code :
- Compliant
- JESD-609 Code :
- e3
- Input Bias Current :
- 5(nA)
- Voltage Gain dB :
- 120 dB
- Terminal Pitch :
- 1.27 mm
- Single Supply Voltage (Min) :
- 2.3(V)
- Power Supply Type :
- Single
- Pbfree Code :
- yes
- Output Current per Channel :
- 17 mA
- Published :
- 2008
- Min Supply Voltage :
- 2.3 V
- Supplier Device Package :
- 8-SOIC
- Number of Pins :
- 8
- Mount :
- Surface Mount
- Packaging :
- Tube
- Peak Reflow Temperature (Cel) :
- 260
- Base Part Number :
- MCP617
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Package Shape :
- RECTANGULAR
- Seated Height-Max :
- 1.75 mm
- Base Product Number :
- MCP617
- Product :
- Operational Amplifiers
- Operating Temp Range :
- -40C to 85C
- Maximum Input Offset Current :
- 0.00015(TYP)@5.5V
- Supply Voltage Limit-Max :
- 7V
- Unity Gain BW-Nom :
- 190 kHz
- Frequency Compensation :
- yes
- Min Operating Temperature :
- -40 °C
- Power Supply Rejection Ratio (PSRR) :
- 86dB
- Number of Channels :
- 2
- Average Bias Current-Max (IIB) :
- 0.005μA
- Current - Output / Channel :
- 17mA
- Operating Temperature :
- -40°C~85°C
- Factory Lead Time :
- 10 Weeks
- Architecture :
- VOLTAGE-FEEDBACK
- Qualification Status :
- Not Qualified
- Maximum Operating Supply Voltage :
- 5.5 V
- Supply Type :
- Single
- Max Operating Temperature :
- 85 °C
- Terminal Position :
- Dual
- Output Current :
- 17mA
- Single Supply Voltage (Max) :
- 5.5(V)
- Surface Mount :
- yes
- Amplifier Type :
- GENERAL PURPOSE
- Operating Temperature Classification :
- Industrial
- Mounting Style :
- SMD/SMT
- Number of Channels per Chip :
- 2
- Voltage Gain :
- 120dB
- Rail/Rail I/O Type :
- Rail to Rail Output
- Maximum Operating Temperature :
- +85 °C
- Slew Rate :
- 0.08V/µs
- Number of Amplifiers :
- 2
- Schedule B :
- 8542330000, 8542330000/8542330000, 8542330000/8542330000/8542330000, 8542330000/8542330000/8542330000/8542330000
- Output Type :
- Rail-to-Rail
- JESD-30 Code :
- R-PDSO-G8
- Manufacturer :
- Microchip
- Package Type :
- SOIC N
- Number of Functions :
- 2
- Number of Elements :
- 2
- Micropower :
- yes
- Radiation Hardening :
- No
- Product Status :
- Active
- Dual Supply Voltage (Max) :
- Not Required(V)
- Input Offset Voltage-Max :
- 150 µV
- Product Category :
- Operational Amplifiers - Op Amps
- Supply Current-Max :
- 0.05 mA
- Gain Bandwidth Product :
- 190kHz
- Max Supply Voltage :
- 5.5 V
- Shut Down Feature :
- No
- Terminal Form :
- Gull wing
- Operating Supply Voltage :
- 5.5 V
- Rad Hardened :
- No
- Lead Free :
- Lead Free
- Current - Input Bias :
- 15nA
- MSL :
- MSL 1 - Unlimited
- Operating Supply Current :
- 19 uA
- Dimensions :
- 4.9 x 3.9 x 1.25mm
- Height :
- 1.25mm
- Width :
- 3.9mm
- Supplier Package :
- SOIC N
- ECCN Code :
- EAR99
- HTS Code :
- 8542.33.00.01
- Low-Offset :
- yes
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Voltage - Supply, Single/Dual (±) :
- 2.3V~5.5V
- REACH SVHC :
- No SVHC
- Shutdown :
- No Shutdown
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Datasheets
- MCP617-I/SN

2 Channels 17 mA per Channel 15nA 80 dB Instrumentational OP Amps 0.005μA 5.5 V 2.3V~5.5V MCP617 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP617-I/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 150μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 19 uA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 120dB for the time being. A instrumentation amplifier like this has 2 circuits. On the buffer amps, there are 2 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 85 °C should not be used for the operation of buffer amplifier. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. There is a recommendation that this electrical part be used with a supply with 19μA current rating. This electric component can work from a voltage of under 5.5 V as far as supply voltage is concerned. A voltage of 2.3 V or higher is recommended for the linear amplifier's supply voltage. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 56200. The buffer amplifier consists of 2 amplifiers. 8 wire terminals are provided on this op amp.
MCP617-I/SN Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP617-I/SN Applications
There are a lot of Microchip Technology
MCP617-I/SN Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















