MCP616T-I/SN
- Mfr.Part #
- MCP616T-I/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 8,633
- In Stock :
- 8,633
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Product Status :
- Active
- Number of Circuits :
- 1
- Mounting :
- Surface Mount
- Power :
- No
- Voltage - Supply, Single/Dual (±) :
- 2.3V~5.5V
- Base Part Number :
- MCP616
- Common Mode Rejection Ratio :
- 80 dB
- Unity Gain BW-Nom :
- 190 kHz
- JESD-609 Code :
- e3
- Number of Terminals :
- 8
- Input Bias Current :
- 5 nA
- Supply Type :
- Single
- RoHS Status :
- ROHS3 Compliant
- Supplier Device Package :
- 8-SOIC
- Mounting Style :
- SMD/SMT
- Qualification :
- AEC-Q100
- Radiation Hardening :
- No
- Low-Bias :
- No
- Slew Rate :
- 0.08V/µs
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Operating Supply Voltage :
- 1.8 V
- Lead Free :
- Lead Free
- Product :
- Operational Amplifiers
- Factory Lead Time :
- 10 Weeks
- Mounting Type :
- Surface Mount
- Gain Bandwidth Product :
- 190kHz
- Frequency Compensation :
- yes
- Surface Mount :
- yes
- Supply Voltage Limit-Max :
- 7V
- Width :
- 3.9 mm
- Brand :
- Microchip Technology
- Maximum Operating Supply Voltage :
- 5.5 V
- HTS Code :
- 8542.33.00.01
- Supply Voltage :
- 5V
- Published :
- 2008
- Mount :
- Surface Mount
- ECCN Code :
- EAR99
- Power Supplies :
- 2.5/5V
- Series :
- --
- Length :
- 4.9mm
- Min Supply Voltage :
- 2.3 V
- Supplier Package :
- SOIC N
- Operating Temperature :
- -40°C~85°C
- Wideband :
- No
- Base Product Number :
- MCP616
- Average Bias Current-Max (IIB) :
- 0.005μA
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Pbfree Code :
- yes
- Output Current :
- 17mA
- Micropower :
- yes
- RoHS :
- Compliant
- Input Offset Voltage (Vos) :
- 150μV
- Minimum Operating Temperature :
- - 40 C
- Seated Height-Max :
- 1.75 mm
- Voltage - Input Offset :
- 150μV
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Packing Method :
- Tape and Reel
- Terminal Position :
- Dual
- Voltage Gain-Min :
- 56200
- Architecture :
- VOLTAGE-FEEDBACK
- Min Operating Temperature :
- -40 °C
- Height :
- 1.25 mm (Min)
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Number of Pins :
- 8
- Nominal Supply Current :
- 19μA
- Terminal Finish :
- Matte Tin (Sn)
- Maximum Operating Temperature :
- + 85 C
- Operating Supply Current :
- 19 uA
- Reach Compliance Code :
- Compliant
- Output Type :
- Rail-to-Rail
- Output Current per Channel :
- 17 mA
- Input Offset Voltage-Max :
- 150 µV
- Manufacturer :
- Microchip
- Temperature Grade :
- Industrial
- Pin Count :
- 8
- Packaging :
- Tape and Reel (TR)
- Current - Output / Channel :
- 17mA
- Bias Current-Max (IIB) @25C :
- 0.005μA
- Current - Supply :
- 19μA
- Number of Elements :
- 1
- Screening Level :
- Industrial
- Max Operating Temperature :
- 85 °C
- Max Supply Voltage :
- 5.5 V
- Product Type :
- Op Amps - Operational Amplifiers
- JESD-30 Code :
- R-PDSO-G8
- Number of Functions :
- 1
- Current - Input Bias :
- 15nA
- Terminal Pitch :
- 1.27 mm
- Shutdown :
- No Shutdown
- Voltage Gain dB :
- 120 dB
- Terminal Form :
- Gull wing
- Qualification Status :
- Not Qualified
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Number of Terminations :
- 8
- Low-Offset :
- yes
- Supply Current-Max :
- 0.025 mA
- Amplifier Type :
- GENERAL PURPOSE
- Power Supply Rejection Ratio (PSRR) :
- 86dB
- Type :
- General Purpose Amplifier
- Package Shape :
- RECTANGULAR
- Number of Channels :
- 1
- Voltage Gain :
- 120dB
- Number of Channels per Chip :
- 1
- Peak Reflow Temperature (Cel) :
- 260
- Product Category :
- Operational Amplifiers - Op Amps
- Datasheets
- MCP616T-I/SN

1 Channels 17 mA per Channel 15nA 80 dB Instrumentational OP Amps 0.005μA 1.8 V 2.3V~5.5V MCP616 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP616T-I/SN Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 150μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 19 uA , this buffer op amp will be able to operate. 120dB should be the voltage gain. The buffer amp consists of 1 circuits in total. 1 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than -40 °C degrees Celsius in order to function properly. You should not use op amp above 85 °C . There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 1.8 V. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. A supply of 19μA or higher is recommended for use with this electronic part. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 5.5 V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 2.3 V, it is recommended to keep it higher. The -- stands for the buffer op amp's serial number. There are a maximum of 56200 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. The buffer op amp has 8 terminals that can be used for connecting wires to the amplifier.
MCP616T-I/SN Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP616T-I/SN Applications
There are a lot of Microchip Technology
MCP616T-I/SN Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















