MCP6144T-E/ST
- Mfr.Part #
- MCP6144T-E/ST
- Manufacturer
- Microchip Technology
- Package / Case
- 14-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14TSSOP
- Stock
- 43,102
- In Stock :
- 43,102
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Current - Output / Channel :
- 20 mA
- Supplier Package :
- TSSOP
- Average Bias Current-Max (IIB) :
- 0.005μA
- Published :
- 2007
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Number of Functions :
- 4
- Current - Supply :
- 600nA
- Pin Count :
- 14
- Mounting Style :
- SMD/SMT
- Operating Temperature :
- -40°C~125°C
- Operating Supply Current :
- 600 nA
- Product Status :
- Active
- Number of Terminations :
- 14
- Supply Type :
- Single
- Package :
- Tape and Reel (TR)
- Qualification :
- AEC-Q100
- Temperature Grade :
- Automotive
- Base Part Number :
- MCP6144
- Number of Terminals :
- 14
- Min Operating Temperature :
- -40 °C
- Terminal Finish :
- Matte Tin (Sn)
- Voltage Gain-Min :
- 56200
- Unity Gain BW-Nom :
- 100 kHz
- JESD-30 Code :
- R-PDSO-G14
- RoHS Status :
- ROHS3 Compliant
- Brand :
- Microchip Technology
- Product Type :
- Op Amps - Operational Amplifiers
- Maximum Operating Supply Voltage :
- 5.5 V
- Manufacturer :
- Microchip
- Low-Offset :
- No
- Width :
- 4.4 mm
- Number of Pins :
- 14
- Input Bias Current :
- 100 pA
- Output Current per Channel :
- 21 mA
- Voltage Gain :
- 115dB
- Current - Input Bias :
- 1pA
- Package Shape :
- RECTANGULAR
- Peak Reflow Temperature (Cel) :
- 260
- Output Current :
- 21mA
- Supply Current-Max :
- 0.004 mA
- Voltage - Input Offset :
- 3 mV
- Surface Mount :
- yes
- Nominal Supply Current :
- 600nA
- Supply Voltage Limit-Max :
- 7V
- Output Type :
- Rail-to-Rail
- Product :
- Operational Amplifiers
- Series :
- MCP6144
- Type :
- General Purpose Amplifier
- Supplier Device Package :
- 14-TSSOP
- Terminal Pitch :
- 0.65mm
- Terminal Position :
- Dual
- Packaging :
- Tape and Reel (TR)
- Number of Channels :
- 4
- Length :
- 5mm
- Reach Compliance Code :
- Compliant
- Min Supply Voltage :
- 1.4 V
- HTS Code :
- 8542.33.00.01
- Number of Channels per Chip :
- 4
- Amplifier Type :
- GENERAL PURPOSE
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- JESD-609 Code :
- e3
- Gain Bandwidth Product :
- 100kHz
- Slew Rate :
- 0.003V/μs
- Input Offset Voltage-Max :
- 3000 µV
- Common Mode Rejection Ratio :
- 60 dB
- Mount :
- Surface Mount
- Number of Elements :
- 4
- Height :
- 0.9 mm
- Package / Case :
- 14-TSSOP (0.173, 4.40mm Width)
- Architecture :
- VOLTAGE-FEEDBACK
- Maximum Operating Temperature :
- + 125 C
- RoHS :
- Compliant
- Terminal Form :
- Gull wing
- Factory Lead Time :
- 6 Weeks
- Lead Free :
- Lead Free
- Mounting :
- Surface Mount
- Micropower :
- yes
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Number of Circuits :
- 4
- Max Supply Voltage :
- 5.5 V
- Low-Bias :
- yes
- Voltage - Supply, Single/Dual (±) :
- 1.4V~6V
- Product Category :
- Operational Amplifiers - Op Amps
- Height Seated (Max) :
- 1.2mm
- Frequency Compensation :
- YES AVCL>=10
- Mounting Type :
- Surface Mount
- Voltage Gain dB :
- 115 dB
- Pbfree Code :
- yes
- Minimum Operating Temperature :
- - 40 C
- Radiation Hardening :
- No
- Input Offset Voltage (Vos) :
- 3mV
- Base Product Number :
- MCP6144
- ECCN Code :
- EAR99
- Shutdown :
- No Shutdown
- Packing Method :
- Tape and Reel
- Supply Voltage :
- 5V
- Qualification Status :
- Not Qualified
- Power Supplies :
- 1.5/5V
- Screening Level :
- Extended Industrial
- Operating Supply Voltage :
- 5.5 V
- Seated Height-Max :
- 1.2 mm
- Max Operating Temperature :
- 125 °C
- Datasheets
- MCP6144T-E/ST

4 Channels 21 mA per Channel 1pA 60 dB Instrumentational OP Amps 0.005μA 5.5 V 1.4V~6V MCP6144 14 Pins 14-TSSOP (0.173, 4.40mm Width)
MCP6144T-E/ST Overview
In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 3mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 600 nA and 10 . Maintain 115dB as the voltage gain. In total, there are 4 circuits on this buffer amplifier. Buffer op amp is equipped with 4 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is recommended that the temperature of this op amp ic should not fall below -40 °C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 125 °C degrees. As a whole, there are 4 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. As a result of this, the buffer amplifier is packed in TAPE AND REEL. This electronic part is recommended to be used with an 600nA supply for best performance. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 5.5 V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 1.4 V when using it. MCP6144 is the number that corresponds to the series of the buffer op amp. A minimum voltage gain of 56200 is the minimum voltage gain that this instrumentation amplifier is capable of producing. As part of this op amp ic, there are 14 terminals on which wires can be connected.
MCP6144T-E/ST Features
14 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
14Terminations
MCP6144T-E/ST Applications
There are a lot of Microchip Technology
MCP6144T-E/ST Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















