MCP6143T-I/SN
- Mfr.Part #
- MCP6143T-I/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 35,179
- In Stock :
- 35,179
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Terminal Form :
- Gull wing
- Type :
- General Purpose Amplifier
- Peak Reflow Temperature (Cel) :
- 260
- Surface Mount :
- yes
- Output Current :
- 21mA
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Power Supplies :
- 1.5/5 V
- Max Operating Temperature :
- 85 °C
- Seated Height-Max :
- 1.75 mm
- Product Category :
- Operational Amplifiers - Op Amps
- Shutdown :
- No Shutdown
- Width :
- 3.9 mm
- Input Bias Current :
- 1 pA
- Current - Output / Channel :
- 20mA
- Height :
- 1.25 mm (Min)
- Min Operating Temperature :
- -40 °C
- Number of Channels per Chip :
- 1
- Base Part Number :
- MCP6143
- Unity Gain BW-Nom :
- 100 kHz
- Voltage Gain :
- 115dB
- Voltage Gain dB :
- 115 dB
- Base Product Number :
- MCP6143
- Low-Bias :
- yes
- Packaging :
- Tape and Reel (TR)
- Qualification Status :
- Not Qualified
- Input Offset Voltage (Vos) :
- 3mV
- Brand :
- Microchip Technology
- Mounting Style :
- SMD/SMT
- RoHS Status :
- ROHS3 Compliant
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Terminal Position :
- Dual
- Supply Voltage :
- 5V
- Min Supply Voltage :
- 1.4 V
- Mounting Type :
- Surface Mount
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Factory Lead Time :
- 14 Weeks
- Supplier Package :
- SOIC N
- Product :
- Operational Amplifiers
- Pin Count :
- 8
- Max Supply Voltage :
- 5.5 V
- RoHS :
- Compliant
- Common Mode Rejection Ratio :
- 60 dB
- Mounting :
- Surface Mount
- Number of Functions :
- 1
- Operating Supply Voltage :
- 3.6, 2.7, 3 V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Package :
- Tape and Reel (TR)
- Manufacturer :
- Microchip
- Screening Level :
- Industrial
- Length :
- 4.9mm
- Voltage - Supply, Single/Dual (±) :
- 1.4V~6V
- Micropower :
- yes
- Wideband :
- No
- Power :
- No
- Pbfree Code :
- yes
- Lead Free :
- Lead Free
- Product Type :
- Op Amps - Operational Amplifiers
- Current - Supply :
- 600nA
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Published :
- 2009
- ECCN Code :
- EAR99
- Qualification :
- AEC-Q100
- Programmable Power :
- No
- Slew Rate :
- 0.003V/μs
- Product Status :
- Active
- Number of Terminations :
- 8
- Series :
- --
- JESD-609 Code :
- e3
- Output Current per Channel :
- 20mA
- Mount :
- Surface Mount
- Packing Method :
- Tape and Reel
- Radiation Hardening :
- No
- HTS Code :
- 8542.33.00.01
- Current - Input Bias :
- 1pA
- Low-Offset :
- No
- Maximum Operating Supply Voltage :
- 5.5 V
- Supplier Device Package :
- 8-SOIC
- Voltage Gain-Min :
- 56200
- Terminal Finish :
- Matte Tin (Sn)
- Voltage - Input Offset :
- 3mV
- Temperature Grade :
- Industrial
- Gain Bandwidth Product :
- 100kHz
- Minimum Operating Temperature :
- - 40 C
- Number of Elements :
- 1
- Supply Voltage Limit-Max :
- 7V
- Average Bias Current-Max (IIB) :
- 0.0001 µA
- Number of Terminals :
- 8
- JESD-30 Code :
- R-PDSO-G8
- Amplifier Type :
- GENERAL PURPOSE
- Operating Temperature :
- -40°C~85°C
- Number of Circuits :
- 1
- Package Shape :
- RECTANGULAR
- Nominal Supply Current :
- 600nA
- Input Offset Voltage-Max :
- 3000 µV
- Supply Current-Max :
- 0.001 mA
- Operating Supply Current :
- 600nA
- Terminal Pitch :
- 1.27 mm
- Frequency Compensation :
- YES (AVCL>=10)
- Number of Pins :
- 8
- Number of Channels :
- 1
- Maximum Operating Temperature :
- + 85 C
- Reach Compliance Code :
- Compliant
- Architecture :
- VOLTAGE-FEEDBACK
- Supply Type :
- Single
- Output Type :
- Rail-to-Rail
- Datasheets
- MCP6143T-I/SN

1 Channels 20mA per Channel 1pA 60 dB Instrumentational OP Amps 0.0001 µA 3.6, 2.7, 3 V 1.4V~6V MCP6143 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6143T-I/SN Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 3mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 600nA can be used to operate this linear amplifier. There should be no change in the voltage gain at 115dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This instrumentation amplifier cannot operate below -40 °C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85 °C. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3.6, 2.7, 3 V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. For optimal performance, this electrical part should be connected to a supply with a current of 600nA. It is important to keep in mind that the power supply voltage of this electric component is below 5.5 V, which is suitable. Keeping the linear amplifier's supply voltage above 1.4 V is recommended. Buffer op amp series numbers are indicated by the --. This op amp ic can conduct a minimum voltage gain of 56200. There are 8 wire terminals on this op amp ic.
MCP6143T-I/SN Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6143T-I/SN Applications
There are a lot of Microchip Technology
MCP6143T-I/SN Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















