MCP6143T-E/MS

Share

Or copy the link below:

Mfr.Part #
MCP6143T-E/MS
Manufacturer
Microchip Technology
Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet
Download
Description
IC OPAMP GP 1 CIRCUIT 8MSOP
Stock
2,757
In Stock :
2,757

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Microchip Technology
Product Category :
Instrumentation, OP Amps, Buffer Amps
Power Supply Rejection Ratio (PSRR) :
70dB
Output Current per Channel :
20mA
Amplifier Type :
GENERAL PURPOSE
Low-Bias :
yes
Current - Input Bias :
1pA
Wideband :
No
Mounting Style :
SMD/SMT
Product :
Operational Amplifiers
Supplier Device Package :
8-MSOP
Supply Voltage Limit-Max :
7V
Terminal Pitch :
0.65mm
Max Operating Temperature :
125 °C
Operating Supply Current :
600nA
Lead Free :
Contains Lead
Pin Count :
8
Minimum Operating Temperature :
- 40 C
Output Type :
Rail-to-Rail
Base Part Number :
MCP6143
Voltage Gain :
115dB
Voltage - Supply, Single/Dual (±) :
1.4V~6V
Product Status :
Active
Maximum Operating Supply Voltage :
5.5 V
Brand :
Microchip Technology
Voltage - Input Offset :
3mV
Min Supply Voltage :
1.4 V
Common Mode Rejection Ratio :
60 dB
Series :
--
RoHS :
Compliant
Pbfree Code :
yes
Output Current :
21mA
Voltage Gain dB :
115 dB
Base Product Number :
MCP6143
Package / Case :
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Width :
3 mm
RoHS Status :
Non-RoHS Compliant
Current - Supply :
600nA
Maximum Operating Temperature :
+ 125 C
Length :
3mm
Average Bias Current-Max (IIB) :
0.005μA
JESD-609 Code :
e3
Manufacturer :
Microchip
Terminal Position :
Dual
Screening Level :
Extended Industrial
Product Category :
Operational Amplifiers - Op Amps
Number of Functions :
1
Mount :
Surface Mount
Supply Voltage :
5V
Input Offset Voltage (Vos) :
3mV
Input Bias Current :
1 pA
Type :
General Purpose Amplifier
Number of Channels per Chip :
1
Micropower :
yes
Mounting Type :
Surface Mount
Packaging :
Tape and Reel (TR)
Architecture :
VOLTAGE-FEEDBACK
Qualification Status :
Not Qualified
Supplier Package :
MSOP
Operating Temperature :
-40°C~125°C
Supply Type :
Single
Slew Rate :
0.003V/μs
Number of Pins :
8
Number of Circuits :
1
Mounting :
Surface Mount
Nominal Supply Current :
600nA
Shutdown :
No Shutdown
Current - Output / Channel :
20mA
Height :
0.85 mm
Low-Offset :
No
Time@Peak Reflow Temperature-Max (s) :
40
Peak Reflow Temperature (Cel) :
260
Number of Channels :
1
Packing Method :
Tape and Reel
Max Supply Voltage :
5.5 V
Terminal Finish :
Matte Tin (Sn)
Programmable Power :
No
Terminal Form :
Gull wing
Moisture Sensitivity Level (MSL) :
1 (Unlimited)
Gain Bandwidth Product :
100kHz
Operating Supply Voltage :
5.5 V
Product Type :
Op Amps - Operational Amplifiers
Factory Lead Time :
20 Weeks
Qualification :
AEC-Q100
Number of Elements :
1
Number of Terminations :
8
Published :
2007
Lifecycle Status :
Production (Last Updated: 2 years ago)
Package :
Tape and Reel (TR)
Min Operating Temperature :
-40 °C
ECCN Code :
EAR99
Unity Gain BW-Nom :
100 kHz
Datasheets
MCP6143T-E/MS
Introducing Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP6143T-E/MS from Chip IC,where excellence meets affordability. This product stands out with its Base Part Number:MCP6143, Package / Case:8-TSSOP, 8-MSOP (0.118, 3.00mm Width), Type:General Purpose Amplifier, Mounting Type:Surface Mount, Operating Temperature:-40°C~125°C, Number of Pins:8, Number of Channels:1, Number of Terminations:8, MCP6143T-E/MS pinout, MCP6143T-E/MS datasheet PDF, MCP6143T-E/MS amp .Beyond Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP6143T-E/MS ,we also offer OP07CDR, TS321CX5 RFG, NE5532ADR, Our vast inventory has you covered. Contact us now for immediate solutions.

Microchip Technology MCP6143T-E/MS


1 Channels 20mA per Channel 1pA 60 dB Instrumentational OP Amps 0.005μA 5.5 V 1.4V~6V MCP6143 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

MCP6143T-E/MS Overview


A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 600nA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 1 circuits that are connected together. There are 1 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than -40 °C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 125 °C. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. The instrumentation amplifier is packed in the form of TAPE AND REEL. As a recommendation, this electronic component should be used with a power supply that can deliver 600nA. I would like to point out that this electrical component is capable of working from a voltage below 5.5 V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 1.4 V at all times. The -- indicates the series number of the op amp.

MCP6143T-E/MS Features


8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail


MCP6143T-E/MS Applications


There are a lot of Microchip Technology
MCP6143T-E/MS Instrumentational OP Amps applications.


  • Addition operation circuits
  • Subtraction operation circuits
  • single/dual op amp sum and difference circuits
  • Integrator circuits
  • Differentiator circuits
  • Logarithmic operation circuits
  • Exponential operation circuits
  • Multiplication circuits
  • Division circuits
  • Precision measurement
Purchase

You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • ROHM Semiconductor
    IC CMOS 2 CIRCUIT 8SOP
  • Diodes Incorporated
    IC OPAMP GP 1 CIRCUIT SOT25
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
  • Texas Instruments
    IC OPAMP GP 4 CIRCUIT 14SOIC
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
RFQ
BOM