MCP6143-E/MS
- Mfr.Part #
- MCP6143-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8MSOP
- Stock
- 102
- In Stock :
- 102
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Base Part Number :
- MCP6143
- Low-Bias :
- yes
- Product Status :
- Active
- Power Supply Type :
- Single
- Radiation Hardening :
- No
- Terminal Form :
- Gull wing
- Current - Supply :
- 600nA
- Number of Terminals :
- 8
- Gain Bandwidth Product :
- 100kHz
- Average Bias Current-Max (IIB) :
- 0.005μA
- Voltage Gain :
- 115dB
- Package Shape :
- Square
- Supply Current-Max :
- 0.001 mA
- Operating Supply Current :
- 600nA
- Minimum Operating Temperature :
- - 40 C
- Number of Elements :
- 1
- Architecture :
- VOLTAGE-FEEDBACK
- JESD-30 Code :
- S-PDSO-G8
- Power :
- No
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Shut Down Support :
- No
- Length :
- 3mm
- HTS Code :
- 8542.33.00.01
- ECCN Code :
- EAR99
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Low-Offset :
- No
- JESD-609 Code :
- e3
- Operating Temperature :
- -40°C~125°C
- Min Operating Temperature :
- -40 °C
- Input Offset Voltage (Vos) :
- 3mV
- Supplier Device Package :
- 8-MSOP
- Product Category :
- Operational Amplifiers - Op Amps
- Number of Channels :
- 1
- Terminal Position :
- Dual
- Width :
- 3 mm
- Amplifier Type :
- GENERAL PURPOSE
- Type :
- General Purpose Amplifier
- Number of Terminations :
- 8
- Supply Type :
- Single
- Unity Gain BW-Nom :
- 100 kHz
- Voltage - Supply, Single/Dual (±) :
- 1.4V~6V
- Slew Rate :
- 0.003V/μs
- Number of Pins :
- 8
- Frequency Compensation :
- YES (AVCL>=10)
- Input Bias Current :
- 1 pA
- Maximum Operating Temperature :
- + 125 C
- Packing Method :
- Tube
- Mount :
- Surface Mount
- Pbfree Code :
- yes
- Product Type :
- Op Amps - Operational Amplifiers
- Qualification Status :
- Not Qualified
- Mounting Style :
- SMD/SMT
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Published :
- 2002
- Nominal Supply Current :
- 600nA
- Seated Height-Max :
- 1.1 mm
- Surface Mount :
- yes
- Wideband :
- No
- Reach Compliance Code :
- Compliant
- Terminal Finish :
- Matte Tin (Sn)
- Maximum Operating Supply Voltage :
- 5.5 V
- Operating Supply Voltage :
- 5.5 V
- Max Operating Temperature :
- 125 °C
- Factory Lead Time :
- 20 Weeks
- Package :
- Tube
- Packaging :
- Tube
- Temperature Grade :
- Automotive
- Manufacturer :
- Microchip
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Peak Reflow Temperature (Cel) :
- 260
- Mounting :
- Surface Mount
- Programmable Power :
- No
- Voltage Gain-Min :
- 56200
- Supply Voltage :
- 5V
- Number of Functions :
- 1
- Voltage Gain dB :
- 115 dB
- Input Offset Voltage-Max :
- 3000 µV
- Current - Input Bias :
- 1pA
- Min Supply Voltage :
- 1.4 V
- Product :
- Operational Amplifiers
- Series :
- --
- Voltage - Input Offset :
- 3mV
- Base Product Number :
- MCP6143
- Height :
- 0.85 mm
- Number of Channels per Chip :
- 1
- Micropower :
- yes
- Terminal Pitch :
- 0.65mm
- Brand :
- Microchip Technology
- Screening Level :
- Extended Industrial
- RoHS Status :
- Non-RoHS Compliant
- Power Supplies :
- 1.5/5 V
- Max Supply Voltage :
- 5.5 V
- Supply Voltage Limit-Max :
- 7V
- Output Current :
- 21mA
- Qualification :
- AEC-Q100
- Number of Circuits :
- 1
- Common Mode Rejection Ratio :
- 60 dB
- Output Type :
- Rail-to-Rail
- Supplier Package :
- MSOP
- Shutdown :
- No Shutdown
- Pin Count :
- 8
- Current - Output / Channel :
- 20mA
- Mounting Type :
- Surface Mount
- RoHS :
- Compliant
- Lead Free :
- Contains Lead
- Output Current per Channel :
- 20mA
- Datasheets
- MCP6143-E/MS
MCP6143-E/MS Documents

1 Channels 20mA per Channel 1pA 60 dB Instrumentational OP Amps 0.005μA 5.5 V 1.4V~6V MCP6143 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6143-E/MS Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. 8 pins are located on the operational amplifiers. The input offset voltage is 3mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 600nA . It is recommended to keep the voltage gain at 115dB at all times. This op amp contains 1 circuits. On the buffer amps, there are 1 channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For this linear amplifier to work, the temperature should not be below -40 °C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 125 °C. The total number of elements in this buffer amplifier is 1. The operating supply voltage of the buffer op amp is rated at 5.5 V. This linear amplifier pack is based on the TUBE axis. It is recommended that you use an 600nA power supply with this electrical part in order for it to operate correctly. Under 5.5 V is the minimum supply voltage for this electric component. Over 1.4 V is a recommended supply voltage for buffer ampsInstrumentation amplifiers are numbered by their -- series. This op amp ic is capable of conducting at least 56200 voltage gains. There are 8 terminals for wires on this op amp ic.
MCP6143-E/MS Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6143-E/MS Applications
There are a lot of Microchip Technology
MCP6143-E/MS Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















