MCP6142-E/P
- Mfr.Part #
- MCP6142-E/P
- Manufacturer
- Microchip Technology
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8DIP
- Stock
- 41,520
- In Stock :
- 41,520
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Shutdown :
- No Shutdown
- Pin Count :
- 8
- Current - Input Bias :
- 1pA
- Voltage Gain-Min :
- 56200
- Number of Terminations :
- 8
- JESD-609 Code :
- e3
- Product Category :
- Operational Amplifiers - Op Amps
- JESD-30 Code :
- R-PDIP-T8
- Output Current :
- 21mA
- Number of Circuits :
- 2
- Output Current per Channel :
- 21 mA
- Min Supply Voltage :
- 1.4 V
- Number of Amplifiers :
- 2
- Low-Bias :
- yes
- Supply Current-Max :
- 0.002 mA
- Frequency Compensation :
- YES AVCL>=10
- Product Type :
- Op Amps - Operational Amplifiers
- Max Supply Voltage :
- 5.5 V
- Maximum Operating Temperature :
- + 125 C
- HTS Code :
- 8542.33.00.01
- Height :
- 4.953mm
- Voltage Gain dB :
- 115 dB
- Average Bias Current-Max (IIB) :
- 0.005μA
- Slew Rate :
- 0.003V/μs
- Terminal Finish :
- Matte Tin (Sn)
- Reach Compliance Code :
- Compliant
- Number of Pins :
- 8
- Operating Supply Voltage :
- 5.5 V
- Supply Voltage Limit-Max :
- 7V
- Base Part Number :
- MCP6142
- Manufacturer :
- Microchip
- Current - Supply :
- 600nA
- Qualification Status :
- Not Qualified
- Length :
- 10.16mm
- Input Offset Voltage (Vos) :
- 3mV
- Output Type :
- Rail-to-Rail
- Number of Elements :
- 2
- RoHS :
- Compliant
- Base Product Number :
- MCP6142
- Supplier Package :
- PDIP
- Minimum Operating Temperature :
- - 40 C
- Power Supplies :
- 1.5/5V
- Screening Level :
- Extended Industrial
- Maximum Operating Supply Voltage :
- 5.5 V
- Unity Gain BW-Nom :
- 100 kHz
- Bandwidth :
- 100 kHz
- Voltage Gain :
- 115dB
- Package :
- Tube
- Power Supply Type :
- Single
- Architecture :
- VOLTAGE-FEEDBACK
- Mount :
- Through Hole
- Seated Height-Max :
- 5.334 mm
- Gain Bandwidth Product :
- 100 kHz
- Mounting Style :
- Through Hole
- Max Operating Temperature :
- 125 °C
- Supplier Device Package :
- 8-PDIP
- Width :
- 7.112mm
- Number of Functions :
- 2
- Terminal Form :
- THROUGH-HOLE
- Product Status :
- Active
- Peak Reflow Temperature (Cel) :
- Not Applicable
- Published :
- 2007
- Qualification :
- AEC-Q100
- Operating Supply Current :
- 600 nA
- Lead Free :
- Lead Free
- Brand :
- Microchip Technology
- Low-Offset :
- No
- Current - Output / Channel :
- 20 mA
- Supply Voltage :
- 5V
- REACH SVHC :
- No SVHC
- Number of Channels :
- 2
- Factory Lead Time :
- 7 Weeks
- Terminal Position :
- Dual
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Min Operating Temperature :
- -40 °C
- Product :
- Operational Amplifiers
- Voltage - Input Offset :
- 3 mV
- Input Bias Current :
- 100 pA
- Terminal Pitch :
- 2.54 mm
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Pbfree Code :
- yes
- Supply Type :
- Single
- Packaging :
- Tube
- Number of Channels per Chip :
- 2
- Micropower :
- yes
- Package Shape :
- RECTANGULAR
- Common Mode Rejection Ratio :
- 60 dB
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Surface Mount :
- No
- Mounting Type :
- Through Hole
- Series :
- -
- Amplifier Type :
- GENERAL PURPOSE
- Type :
- General Purpose Amplifier
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Mounting :
- Through Hole
- Input Offset Voltage-Max :
- 3000 µV
- Number of Terminals :
- 8
- RoHS Status :
- ROHS3 Compliant
- Operating Temperature :
- -40°C~125°C
- Nominal Supply Current :
- 600nA
- Temperature Grade :
- Automotive
- ECCN Code :
- EAR99
- Radiation Hardening :
- No
- Shut Down Support :
- No
- Voltage - Supply, Single/Dual (±) :
- 1.4V~6V
- Datasheets
- MCP6142-E/P

2 Channels 21 mA per Channel 1pA 60 dB Instrumentational OP Amps 0.005μA 5.5 V 1.4V~6V MCP6142 8 Pins 8-DIP (0.300, 7.62mm)
MCP6142-E/P Overview
Op amp is packaged in 8-DIP (0.300, 7.62mm) case. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. Please take in mind that op amp should be run at 5V. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 3mV voltage. Through Hole is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~125°C. Operational amplifier can operate supply current at 600 nA. The voltage gain should stay at 115dB. There are 2 circuits on op amps. Instrumentation amplifier has 2 channels on it. On the output type, there are Rail-to-Rail different types of op amps. It should not lower than -40 °C to operate buffer amplifier. It is recommended that op amp be used at temperatures below 125 °C. Op amp has total of 2 elements. The operating supply voltage of instrumentation amplifier is rated 5.5 V voltage. To run supply current of buffer amplifier under 600nA. With regard tp supply voltage, op amp is used under 5.5 V. To keep the buffer amps' supply voltage higher than 1.4 V. - corresponds to linear amplifier's series. To conduct electronic part voltage gain higher than 56200. There are 2 amplifiers on it. On this buffer op amp, there are a total of 8 terminals.
MCP6142-E/P Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6142-E/P Applications
There are a lot of Microchip Technology
MCP6142-E/P Instrumentational OP Amps applications.
- Proportional operation circuits
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















