MCP6141-E/MS
- Mfr.Part #
- MCP6141-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8MSOP
- Stock
- 14,296
- In Stock :
- 14,296
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Low-Bias :
- yes
- Operating Supply Current :
- 600 nA
- Output Current per Channel :
- 21 mA
- Number of Elements :
- 1
- Voltage Gain-Min :
- 56200
- Wideband :
- No
- Supply Current-Max :
- 0.001 mA
- Current - Output / Channel :
- 20mA
- Voltage Gain dB :
- 115 dB
- HTS Code :
- 8542.33.00.01
- Series :
- --
- Terminal Form :
- Gull wing
- Min Supply Voltage :
- 1.4 V
- Power Supply Type :
- Single
- Min Operating Temperature :
- -40 °C
- Input Offset Voltage (Vos) :
- 3mV
- Package :
- Tube
- RoHS Status :
- Non-RoHS Compliant
- Voltage - Input Offset :
- 3mV
- Common Mode Rejection Ratio :
- 60 dB
- Number of Channels :
- 1
- Number of Circuits :
- 1
- Qualification :
- AEC-Q100
- Maximum Operating Temperature :
- + 125 C
- Input Bias Current :
- 100 pA
- Mounting Type :
- Surface Mount
- Reach Compliance Code :
- Compliant
- Amplifier Type :
- GENERAL PURPOSE
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Mounting Style :
- SMD/SMT
- Number of Channels per Chip :
- 1
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Voltage Gain :
- 115dB
- Base Product Number :
- MCP6141
- Micropower :
- yes
- ECCN Code :
- EAR99
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Number of Pins :
- 8
- Output Current :
- 21mA
- Max Supply Voltage :
- 5.5 V
- Screening Level :
- Extended Industrial
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Slew Rate :
- 0.003V/μs
- Lead Free :
- Lead Free
- Current - Input Bias :
- 1pA
- Base Part Number :
- MCP6141
- Qualification Status :
- Not Qualified
- Number of Terminals :
- 8
- Supplier Device Package :
- 8-MSOP
- Published :
- 2007
- Nominal Supply Current :
- 600nA
- Voltage - Supply, Single/Dual (±) :
- 1.4V~6V
- Surface Mount :
- yes
- Low-Offset :
- No
- Product :
- Operational Amplifiers
- Minimum Operating Temperature :
- - 40 C
- Supplier Package :
- MSOP
- Product Status :
- Active
- Terminal Finish :
- Matte Tin (Sn)
- Frequency Compensation :
- YES (AVCL>=10)
- Shutdown :
- No Shutdown
- Input Offset Voltage-Max :
- 3000 µV
- Product Type :
- Op Amps - Operational Amplifiers
- Seated Height-Max :
- 1.1 mm
- Current - Supply :
- 600nA
- Mount :
- Surface Mount
- RoHS :
- Compliant
- JESD-30 Code :
- S-PDSO-G8
- Brand :
- Microchip Technology
- Pin Count :
- 8
- Packaging :
- Tube
- Terminal Pitch :
- 0.65mm
- Maximum Operating Supply Voltage :
- 5.5 V
- Packing Method :
- Tube
- Radiation Hardening :
- No
- Temperature Grade :
- Automotive
- Product Category :
- Operational Amplifiers - Op Amps
- Supply Type :
- Single
- Height :
- 0.85 mm
- Factory Lead Time :
- 7 Weeks
- JESD-609 Code :
- e3
- Supply Voltage :
- 5V
- Package Shape :
- Square
- Pbfree Code :
- yes
- Mounting :
- Surface Mount
- Power Supplies :
- 1.5/5 V
- Architecture :
- VOLTAGE-FEEDBACK
- Programmable Power :
- No
- Output Type :
- Rail-to-Rail
- Unity Gain BW-Nom :
- 100 kHz
- Manufacturer :
- Microchip
- Peak Reflow Temperature (Cel) :
- 260
- Gain Bandwidth Product :
- 100kHz
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Number of Terminations :
- 8
- Shut Down Support :
- No
- Type :
- General Purpose Amplifier
- Supply Voltage Limit-Max :
- 7V
- Number of Functions :
- 1
- Max Operating Temperature :
- 125 °C
- Operating Supply Voltage :
- 5 V
- Average Bias Current-Max (IIB) :
- 0.005μA
- Power :
- No
- Length :
- 3mm
- Terminal Position :
- Dual
- Operating Temperature :
- -40°C~125°C
- Width :
- 3 mm
- Datasheets
- MCP6141-E/MS
MCP6141-E/MS Documents

1 Channels 21 mA per Channel 1pA 60 dB Instrumentational OP Amps 0.005μA 5 V 1.4V~6V MCP6141 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6141-E/MS Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 600 nA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 1 circuits that are connected together. There are 1 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than -40 °C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 125 °C. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5 V. The instrumentation amplifier is packed in the form of TUBE. As a recommendation, this electronic component should be used with a power supply that can deliver 600nA. I would like to point out that this electrical component is capable of working from a voltage below 5.5 V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 1.4 V at all times. The -- indicates the series number of the op amp. There is a minimum voltage gain of 56200 that this buffer op amp is capable of conducting. In order to connect the buffer amplifier to the wires, it is equipped with 8 terminals.
MCP6141-E/MS Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6141-E/MS Applications
There are a lot of Microchip Technology
MCP6141-E/MS Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















