MCP6074-E/SL
- Mfr.Part #
- MCP6074-E/SL
- Manufacturer
- Microchip Technology
- Package / Case
- 14-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14SOIC
- Stock
- 2
- In Stock :
- 2
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Terminal Form :
- Gull wing
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Voltage Gain in dB :
- 115(dB)
- Pin Count :
- 14
- Package / Case :
- 14-SOIC (0.154, 3.90mm Width)
- Shut Down Support :
- No
- Length :
- 8.636mm
- Maximum Operating Supply Voltage :
- 6 V
- Operating Supply Current :
- 110μA
- Supply Type :
- Single
- Power Supplies :
- 2/5V
- Product :
- Precision Amplifiers
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Factory Lead Time :
- 9 Weeks
- Gain Bandwidth Product :
- 1.2MHz
- Operating Temperature :
- -40°C~125°C
- Number of Circuits :
- 4
- Pbfree Code :
- yes
- Product Status :
- Active
- Height :
- 1.2446mm
- MSL :
- MSL 1 - Unlimited
- JESD-30 Code :
- R-PDSO-G14
- Unity Gain BW-Nom :
- 1200 kHz
- Product Type :
- Precision Amplifiers
- Voltage Gain dB :
- 115 dB
- Nominal Supply Current :
- 110μA
- Base Product Number :
- MCP6074
- Dual Supply Voltage (Max) :
- Not Required(V)
- Programmable Power :
- No
- Architecture :
- VOLTAGE-FEEDBACK
- JESD-609 Code :
- e3
- Brand :
- Microchip Technology / Atmel
- Supply Current-Max :
- 0.68 mA
- Supply Voltage Limit-Max :
- 7V
- Screening Level :
- Extended
- Power Supply Requirement :
- Single
- Terminal Position :
- Dual
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Number of Channels :
- 4
- Amplifier Type :
- GENERAL PURPOSE
- Micropower :
- yes
- Unity Gain Bandwidth Product :
- 1.2
- Mounting :
- Surface Mount
- Slew Rate :
- 0.5V/μs
- Qualification :
- AEC-Q100
- Shutdown :
- No Shutdown
- Output Current per Channel :
- 28mA
- Power Supply Rejection Ratio :
- 70(dB)
- Average Bias Current-Max (IIB) :
- 0.005μA
- Series :
- --
- Number of Pins :
- 14
- Operating Temperature Classification :
- Automotive
- Published :
- 2000
- Terminal Pitch :
- 1.27mm
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Bandwidth :
- 1.2MHz
- Qualification Status :
- Not Qualified
- Voltage Gain-Min :
- 56200
- Maximum Operating Temperature :
- +125 °C
- Radiation Hardening :
- No
- Current - Output / Channel :
- 28 mA
- Supplier Package :
- SOIC N
- Reach Compliance Code :
- Compliant
- Package Type :
- SOIC N
- Lead Free :
- Lead Free
- Type :
- General Purpose Amplifier
- Product Category :
- Precision Amplifiers
- Package :
- Tube
- Mounting Style :
- SMD/SMT
- Single Supply Voltage (Min) :
- 1.8(V)
- Base Part Number :
- MCP6074
- Input Offset Voltage-Max :
- 150 µV
- Voltage Gain :
- 115dB
- Single Supply Voltage (Typ) :
- 3/5(V)
- Operating Temp Range :
- -40C to 125C
- Voltage - Input Offset :
- 150μV
- Dimensions :
- 8.65 x 3.9 x 1.25mm
- Shut Down Feature :
- No
- Mounting Type :
- Surface Mount
- Surface Mount :
- yes
- Minimum Operating Temperature :
- -40 °C
- Manufacturer :
- Microchip
- Power Supply Type :
- Single
- Operating Supply Voltage :
- 6 V
- Number of Terminations :
- 14
- Supplier Device Package :
- 14-SOIC
- Mount :
- Surface Mount
- Current - Input Bias :
- 1pA
- RoHS :
- Details
- Bias Current-Max (IIB) @25C :
- 0.0001μA
- HTS Code :
- 8542.33.00.01
- Peak Reflow Temperature (Cel) :
- 260
- Common Mode Rejection Ratio :
- 72 dB
- Single Supply Voltage (Max) :
- 6(V)
- Input Offset Voltage :
- 0.15@6V(mV)
- Number of Terminals :
- 14
- Number of Functions :
- 4
- Number of Elements :
- 4
- Rad Hardened :
- No
- Input Offset Voltage (Vos) :
- 150μV
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Maximum Input Offset Current :
- 0.000001(TYP)@6V
- Package Shape :
- RECTANGULAR
- Packaging :
- Tube
- Wideband :
- No
- Current - Supply :
- 110μA
- Width :
- 3.9116mm
- Low-Offset :
- yes
- Frequency Compensation :
- yes
- ECCN Code :
- EAR99
- Temperature Grade :
- Automotive
- Seated Height-Max :
- 1.75 mm
- REACH SVHC :
- No SVHC
- RoHS Status :
- ROHS3 Compliant
- Input Bias Current :
- 0.1(nA)
- Output Current :
- 28mA
- Dual Supply Voltage (Min) :
- Not Required(V)
- Number of Channels per Chip :
- 4
- Supply Voltage :
- 3V
- Low-Bias :
- yes
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Rail to Rail :
- Rail to Rail Input/Output
- Output Type :
- Rail-to-Rail
- Power :
- No
- Datasheets
- MCP6074-E/SL

4 Channels 28mA per Channel 1pA 72 dB Instrumentational OP Amps 0.005μA 6 V 1.8V~6V MCP6074 14 Pins 14-SOIC (0.154, 3.90mm Width)
MCP6074-E/SL Overview
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 14 terminations in the next few months. There are a total of 14 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 3V volts. There are 14 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 150μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 110μA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 115dB. On this instrumentation amplifier, there are 4 circuits that are connected together. There are 4 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The buffer op amp is rated for an operating voltage of 4 when it comes to the power supply. The operating supply voltage of the buffer op amp is rated at 6 V. As a recommendation, this electronic component should be used with a power supply that can deliver 110µA. The -- indicates the series number of the op amp. There is a minimum voltage gain of 56200 that this buffer op amp is capable of conducting. In order to connect the buffer amplifier to the wires, it is equipped with 14 terminals.
MCP6074-E/SL Features
14 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
14Terminations
MCP6074-E/SL Applications
There are a lot of Microchip Technology
MCP6074-E/SL Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















