MCP6072T-E/MNY
- Mfr.Part #
- MCP6072T-E/MNY
- Manufacturer
- Microchip Technology
- Package / Case
- 8-WFDFN Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8TDFN
- Stock
- 17,039
- In Stock :
- 17,039
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Package Type :
- TDFN
- Frequency Compensation :
- yes
- Pin Count :
- 8
- Common Mode Rejection Ratio :
- 72 dB
- Terminal Form :
- NO LEAD
- Power Supplies :
- 2/5 V
- Operating Temperature :
- -40°C~125°C
- Number of Amplifiers :
- 2
- Lead Free :
- Lead Free
- RoHS :
- Details
- Radiation Hardening :
- No
- Micropower :
- yes
- MSL :
- MSL 1 - Unlimited
- Nominal Supply Current :
- 110μA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Screening Level :
- Extended
- Bandwidth :
- 1.2MHz
- Base Product Number :
- MCP6072
- Height :
- 750μm
- Maximum Operating Supply Voltage :
- 6 V
- Amplifier Type :
- GENERAL PURPOSE
- Mounting Style :
- SMD/SMT
- Package / Case :
- 8-WFDFN Exposed Pad
- Max Supply Voltage :
- 6 V
- ECCN Code :
- EAR99
- Base Part Number :
- MCP6072
- Mounting Type :
- Surface Mount
- Width :
- 3mm
- Minimum Operating Temperature :
- -40 °C
- REACH SVHC :
- No SVHC
- Supply Current-Max :
- 0.34 mA
- Terminal Position :
- Dual
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Output Type :
- Rail-to-Rail
- Maximum Operating Temperature :
- +125 °C
- Published :
- 2010
- Supply Voltage :
- 3V
- Number of Pins :
- 8
- Product Type :
- Precision Amplifiers
- Number of Channels :
- 2
- Architecture :
- VOLTAGE-FEEDBACK
- Min Operating Temperature :
- -40 °C
- Input Offset Voltage (Vos) :
- 150μV
- Supplier Package :
- TDFN EP
- JESD-30 Code :
- R-PDSO-N8
- Low-Offset :
- yes
- Pbfree Code :
- yes
- Unity Gain BW-Nom :
- 1200 kHz
- Factory Lead Time :
- 9 Weeks
- Rail to Rail :
- Rail to Rail Input/Output
- Number of Channels per Chip :
- 2
- Supply Voltage Limit-Max :
- 7V
- Input Bias Current :
- 100 pA
- Voltage Gain-Min :
- 56200
- Peak Reflow Temperature (Cel) :
- 260
- Mounting :
- Surface Mount
- Packing Method :
- Tape and Reel
- Qualification :
- AEC-Q100
- Series :
- --
- HTS Code :
- 8542.33.00.01
- Operating Supply Current :
- 110 uA
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Voltage - Input Offset :
- 150μV
- Operating Supply Voltage :
- 6 V
- Shutdown :
- No Shutdown
- Voltage Gain dB :
- 115 dB
- Bias Current-Max (IIB) @25C :
- 0.0001μA
- Supply Type :
- Single
- Schedule B :
- 8542330000
- Brand :
- Microchip Technology
- RoHS Status :
- ROHS3 Compliant
- Length :
- 2mm
- Package Shape :
- RECTANGULAR
- Current - Input Bias :
- 1pA
- Number of Circuits :
- 2
- Terminal Pitch :
- 0.5mm
- Supplier Device Package :
- 8-TDFN (2x3)
- Power Supply Type :
- Single
- Current - Supply :
- 110μA
- Number of Elements :
- 2
- Output Current :
- 28mA
- Average Bias Current-Max (IIB) :
- 0.005μA
- Type :
- General Purpose Amplifier
- Slew Rate :
- 0.5V/μs
- Min Supply Voltage :
- 1.8 V
- Number of Terminals :
- 8
- Number of Functions :
- 2
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Seated Height-Max :
- 0.8 mm
- Manufacturer :
- Microchip
- Mount :
- Surface Mount
- Low-Bias :
- yes
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Current - Output / Channel :
- 28 mA
- Product :
- Precision Amplifiers
- Output Current per Channel :
- 28 mA
- Reach Compliance Code :
- Compliant
- Temperature Grade :
- Automotive
- Product Status :
- Active
- Gain Bandwidth Product :
- 1.2MHz
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Max Operating Temperature :
- 125 °C
- Product Category :
- Precision Amplifiers
- Number of Terminations :
- 8
- Packaging :
- Tape and Reel (TR)
- Qualification Status :
- Not Qualified
- Input Offset Voltage-Max :
- 150 µV
- Surface Mount :
- yes
- JESD-609 Code :
- e4
- Dimensions :
- 2 x 3 x 0.75mm
- Voltage Gain :
- 115dB
- Datasheets
- MCP6072T-E/MNY

2 Channels 28 mA per Channel 1pA 72 dB Instrumentational OP Amps 0.005μA 6 V 1.8V~6V MCP6072 8 Pins 8-WFDFN Exposed Pad
MCP6072T-E/MNY Overview
In the package, you will find a 8-WFDFN Exposed Pad-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 3V battery. The op amp ic has an array of 8 pins on it. Op amp rates 150μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 110 uA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 115dB for the time being. A instrumentation amplifier like this has 2 circuits. On the buffer amps, there are 2 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 125 °C should not be used for the operation of buffer amplifier. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 6 V. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a recommendation that this electrical part be used with a supply with 110μA current rating. This electric component can work from a voltage of under 6 V as far as supply voltage is concerned. A voltage of 1.8 V or higher is recommended for the linear amplifier's supply voltage. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 56200. The buffer amplifier consists of 2 amplifiers. 8 wire terminals are provided on this op amp.
MCP6072T-E/MNY Features
8 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6072T-E/MNY Applications
There are a lot of Microchip Technology
MCP6072T-E/MNY Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















