MCP6071T-E/MNY
- Mfr.Part #
- MCP6071T-E/MNY
- Manufacturer
- Microchip Technology
- Package / Case
- 8-WFDFN Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8TDFN
- Stock
- 3,300
- In Stock :
- 3,300
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Terminations :
- 8
- Lead Free :
- Lead Free
- Product :
- Precision Amplifiers
- Number of Channels :
- 1
- Gain Bandwidth Product :
- 1.2MHz
- Factory Lead Time :
- 22 Weeks
- REACH SVHC :
- No SVHC
- Mounting :
- Surface Mount
- RoHS Status :
- ROHS3 Compliant
- Bias Current-Max (IIB) @25C :
- 0.0001 µA
- Power :
- No
- Terminal Position :
- Dual
- Peak Reflow Temperature (Cel) :
- 260
- Operating Temperature :
- -40°C~125°C
- Number of Amplifiers :
- 1
- JESD-609 Code :
- e4
- Terminal Form :
- NO LEAD
- Terminal Pitch :
- 0.5mm
- Architecture :
- VOLTAGE-FEEDBACK
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Screening Level :
- Extended
- Minimum Operating Temperature :
- - 40 C
- Micropower :
- yes
- RoHS :
- Details
- Voltage Gain dB :
- 115 dB
- Package / Case :
- 8-WFDFN Exposed Pad
- Input Offset Voltage-Max :
- 150 µV
- Programmable Power :
- No
- Min Supply Voltage :
- 1.8 V
- Voltage Gain-Min :
- 56200
- Current - Supply :
- 110μA
- Operating Supply Current :
- 110 uA
- Series :
- --
- Qualification Status :
- Not Qualified
- ECCN Code :
- EAR99
- Number of Pins :
- 8
- Nominal Supply Current :
- 110μA
- Length :
- 2mm
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Number of Terminals :
- 8
- Current - Input Bias :
- 1pA
- Pbfree Code :
- yes
- Product Type :
- Precision Amplifiers
- Supply Voltage :
- 3V
- Qualification :
- AEC-Q100
- Shutdown :
- No Shutdown
- Max Operating Temperature :
- 125 °C
- Low-Bias :
- yes
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Output Current per Channel :
- 28 mA
- Packing Method :
- Tape and Reel
- Maximum Operating Supply Voltage :
- 6 V
- Voltage Gain :
- 115dB
- Operating Supply Voltage :
- 3.3 V
- Base Product Number :
- MCP6071
- Power Supplies :
- 2/5V
- Bandwidth :
- 1.2 MHz
- HTS Code :
- 8542.33.00.01
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Supply Voltage Limit-Max :
- 7V
- Radiation Hardening :
- No
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Slew Rate :
- 0.5V/μs
- Temperature Grade :
- Automotive
- Supply Type :
- Single
- Type :
- General Purpose Amplifier
- Product Category :
- Precision Amplifiers
- Average Bias Current-Max (IIB) :
- 0.005μA
- Surface Mount :
- yes
- Input Bias Current :
- 100 pA
- Mounting Style :
- SMD/SMT
- Mount :
- Surface Mount
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Maximum Operating Temperature :
- + 125 C
- Brand :
- Microchip Technology
- Unity Gain BW-Nom :
- 1200 kHz
- Common Mode Rejection Ratio :
- 72 dB
- JESD-30 Code :
- R-PDSO-N8
- Pin Count :
- 8
- Package Shape :
- RECTANGULAR
- Base Part Number :
- MCP6071
- Packaging :
- Tape and Reel (TR)
- Width :
- 3mm
- Seated Height-Max :
- 0.8 mm
- Reach Compliance Code :
- Compliant
- Product Status :
- Active
- Number of Circuits :
- 1
- Output Current :
- 28mA
- Voltage - Input Offset :
- 150μV
- Input Offset Voltage (Vos) :
- 150μV
- Published :
- 2000
- Low-Offset :
- yes
- Manufacturer :
- Microchip
- Supplier Package :
- TDFN EP
- Output Type :
- Rail-to-Rail
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Max Supply Voltage :
- 6 V
- Amplifier Type :
- GENERAL PURPOSE
- Number of Elements :
- 1
- Wideband :
- No
- Number of Functions :
- 1
- Frequency Compensation :
- yes
- Number of Channels per Chip :
- 1
- Height :
- 750μm
- Min Operating Temperature :
- -40 °C
- Supply Current-Max :
- 0.17 mA
- Supplier Device Package :
- 8-TDFN (2x3)
- Mounting Type :
- Surface Mount
- Datasheets
- MCP6071T-E/MNY

1 Channels 28 mA per Channel 1pA 72 dB Instrumentational OP Amps 0.005μA 3.3 V 1.8V~6V MCP6071 8 Pins 8-WFDFN Exposed Pad
MCP6071T-E/MNY Overview
In order to protect the op amps, a 8-WFDFN Exposed Pad case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 150μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 110 uA and 10 . Maintain 115dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. Buffer op amp is equipped with 1 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is recommended that the temperature of this op amp ic should not fall below -40 °C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 125 °C degrees. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3.3 V. As a result of this, the buffer amplifier is packed in TAPE AND REEL. This electronic part is recommended to be used with an 110μA supply for best performance. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 6 V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 1.8 V when using it. -- is the number that corresponds to the series of the buffer op amp. A minimum voltage gain of 56200 is the minimum voltage gain that this instrumentation amplifier is capable of producing. A linear amplifier such as this has 1 amplifiers on it. As part of this op amp ic, there are 8 terminals on which wires can be connected.
MCP6071T-E/MNY Features
8 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6071T-E/MNY Applications
There are a lot of Microchip Technology
MCP6071T-E/MNY Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















