MCP607-I/P
- Mfr.Part #
- MCP607-I/P
- Manufacturer
- Microchip Technology
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8DIP
- Stock
- 20,609
- In Stock :
- 20,609
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Shut Down Feature :
- No
- Average Bias Current-Max (IIB) :
- 0.00008 µA
- Nominal Supply Current :
- 25μA
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Input Offset Voltage :
- 0.25(mV)
- Supplier Device Package :
- 8-PDIP
- Output Current per Channel :
- 17mA
- RoHS Status :
- ROHS3 Compliant
- Voltage Gain :
- 121dB
- Single Supply Voltage (Typ) :
- 3/5(V)
- Terminal Form :
- THROUGH-HOLE
- Number of Terminals :
- 8
- Package Shape :
- RECTANGULAR
- Output Current :
- 17mA
- Unity Gain Bandwidth Product :
- 0.155
- Current - Supply :
- 18.7μA
- Max Frequency :
- 1kHz
- Qualification :
- AEC-Q100
- Number of Pins :
- 8
- Supplier Package :
- PDIP
- JESD-609 Code :
- e3
- RoHS :
- Compliant
- Base Product Number :
- MCP607
- Reach Compliance Code :
- Compliant
- JESD-30 Code :
- R-PDIP-T8
- Operating Supply Voltage :
- 5.5V
- Low-Offset :
- yes
- Supply Voltage Limit-Max :
- 7V
- Voltage - Supply, Single/Dual (±) :
- 2.5V~6V
- Temperature Grade :
- Industrial
- REACH SVHC :
- No SVHC
- Terminal Finish :
- Matte Tin (Sn)
- Supply Type :
- Single
- Output Type :
- Rail-to-Rail
- Amplifier Type :
- GENERAL PURPOSE
- Input Offset Voltage-Max :
- 250 µV
- MSL :
- -
- Max Operating Temperature :
- 85 °C
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Low-Bias :
- yes
- Qualification Status :
- Not Qualified
- Package :
- Tube
- Shut Down Support :
- No
- Base Part Number :
- MCP607
- Terminal Pitch :
- 2.54 mm
- Dual Supply Voltage (Min) :
- Not Required(V)
- Minimum Operating Temperature :
- -40 °C
- Number of Circuits :
- 2
- Power Supply Requirement :
- Single
- Seated Height-Max :
- 5.33 mm
- Product Status :
- Active
- Supply Current-Max :
- 0.05 mA
- Power Supplies :
- 2.5/5.5 V
- Published :
- 2000
- Frequency Compensation :
- yes
- Slew Rate :
- 0.08V/µs
- Surface Mount :
- No
- Height :
- 4.953mm
- Min Input Voltage :
- 2.5V
- Factory Lead Time :
- 6 Weeks
- Power Supply Type :
- Single
- Type :
- General Purpose Amplifier
- Rail to Rail :
- Rail to Rail Output
- Single Supply Voltage (Max) :
- 6(V)
- Number of Terminations :
- 8
- Bandwidth :
- 155 kHz
- Shutdown :
- No Shutdown
- Operating Temperature Classification :
- Industrial
- Min Supply Voltage :
- 2.5 V
- Length :
- 10.16mm
- Input Voltage Range :
- 2.5 → 6 V
- ECCN Code :
- EAR99
- Packaging :
- Tube
- Current - Output / Channel :
- 17mA
- Common Mode Rejection Ratio :
- 75 dB
- Max Input Voltage :
- 6V
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Power Supply Rejection Ratio (PSRR) :
- 80dB
- Pin Count :
- 8
- Lead Free :
- Lead Free
- Package Type :
- PDIP
- Maximum Operating Temperature :
- +85 °C
- Unity Gain BW-Nom :
- 155 kHz
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Product :
- Operational Amplifiers
- Screening Level :
- Industrial
- HTS Code :
- 8542.33.00.01
- Number of Channels :
- 2
- Mount :
- Through Hole
- Mounting :
- Through Hole
- Series :
- --
- Rad Hardened :
- No
- Input Bias Current :
- 1 pA
- Current - Input Bias :
- 1pA
- Product Category :
- Operational Amplifiers - Op Amps
- Radiation Hardening :
- No
- Max Supply Voltage :
- 6 V
- Schedule B :
- 8542330000, 8542330000/8542330000, 8542330000/8542330000/8542330000, 8542330000/8542330000/8542330000/8542330000
- Single Supply Voltage (Min) :
- 2.5(V)
- Min Operating Temperature :
- -40 °C
- Rail/Rail I/O Type :
- Rail to Rail Output
- Input Offset Voltage (Vos) :
- 250μV
- Dual Supply Voltage (Max) :
- Not Required(V)
- Architecture :
- VOLTAGE-FEEDBACK
- Gain Bandwidth Product :
- 155kHz
- Number of Functions :
- 2
- Mounting Style :
- Through Hole
- Operating Supply Current :
- 18.7μA
- Voltage Gain dB :
- 121 dB
- Voltage Gain in dB :
- 121(dB)
- Pbfree Code :
- yes
- Supply Voltage :
- 5V
- Voltage - Input Offset :
- 250μV
- Peak Reflow Temperature (Cel) :
- NOT SPECIFIED
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Voltage Gain-Min :
- 100000
- Mounting Type :
- Through Hole
- Power Supply Rejection Ratio :
- 80(dB)
- Number of Elements :
- 2
- Operating Temp Range :
- -40C to 85C
- Maximum Input Voltage :
- 6 V
- Brand :
- Microchip Technology / Atmel
- Dimensions :
- 9.27 x 6.35 x 3.3mm
- Manufacturer :
- Microchip
- Product Type :
- Op Amps - Operational Amplifiers
- Number of Channels per Chip :
- 2
- Maximum Operating Supply Voltage :
- 6 V
- Width :
- 7.112mm
- Operating Temperature :
- -40°C~85°C
- Number of Amplifiers :
- 2
- Micropower :
- yes
- Terminal Position :
- Dual
- Datasheets
- MCP607-I/P

2 Channels 17mA per Channel 1pA 75 dB Instrumentational OP Amps 0.00008 µA 5.5V 2.5V~6V MCP607 8 Pins 8-DIP (0.300, 7.62mm)
MCP607-I/P Overview
There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 250μV. For this electronic part, it is recommended that you mount it with type Through Hole. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 18.7μA . 121dB should be the voltage gain. A linear amplifier like this has 2 circuits on it. Op amp ic has 2 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. In order for this buffer op amp to function, it should have a temperature of at least -40 °C degrees Celsius. At temperatures greater than 85 °C, Instrumentation amplifier should not be used. There are 2 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.5V. We recommend that you use this electronic part with an 18.7µA supply in order to get the best performance from it. The electrical part is capable of being powered by a voltage of under 6 V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.5 V. The -- represents the op amp's series number. This operational amplifier can conduct a voltage gain of up to 100000 at a minimum. On the linear amplifier, there are 2 amplifiers that are used. A total of 8 terminals are available on this buffer op amp for the connection of wires.
MCP607-I/P Features
8 Pins
supply voltage of 5V
121dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP607-I/P Applications
There are a lot of Microchip Technology
MCP607-I/P Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















