MCP6061T-E/MNY

Share

Or copy the link below:

Mfr.Part #
MCP6061T-E/MNY
Manufacturer
Microchip Technology
Package / Case
8-WFDFN Exposed Pad
Datasheet
Download
Description
IC OPAMP GP 1 CIRCUIT 8TDFN
Stock
10,161
In Stock :
10,161

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Microchip Technology
Product Category :
Instrumentation, OP Amps, Buffer Amps
Moisture Sensitivity Level (MSL) :
1 (Unlimited)
Number of Circuits :
1
Low-Bias :
yes
REACH SVHC :
No SVHC
Common Mode Rejection Ratio :
72 dB
Power :
No
Number of Terminals :
8
Architecture :
VOLTAGE-FEEDBACK
Supplier Device Package :
8-TDFN (2x3)
Lead Free :
Lead Free
Operating Supply Voltage :
4.5, 42 V
Input Offset Voltage (Vos) :
150μV
Voltage - Supply, Single/Dual (±) :
1.8V~6V
Low-Offset :
yes
Pbfree Code :
yes
Peak Reflow Temperature (Cel) :
260
Temperature Grade :
Automotive
Series :
--
Nominal Supply Current :
60μA
Packing Method :
Tape and Reel
RoHS :
Details
JESD-30 Code :
R-PDSO-N8
Manufacturer :
Microchip
Number of Functions :
1
Product Status :
Active
Supply Voltage :
3V
Voltage - Input Offset :
150μV
Length :
2mm
Qualification :
AEC-Q100
Published :
2009
Number of Pins :
8
Package Shape :
RECTANGULAR
Base Part Number :
MCP6061
Qualification Status :
Not Qualified
Supplier Package :
TDFN EP
Slew Rate :
0.25V/µs
Screening Level :
Extended
Height :
730μm
ECCN Code :
EAR99
Package :
Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
Radiation Hardening :
No
Input Offset Voltage-Max :
150 µV
JESD-609 Code :
e4
Terminal Pitch :
0.5mm
Current - Input Bias :
1pA
Package / Case :
8-WFDFN Exposed Pad
Output Current :
27mA
Seated Height-Max :
0.8 mm
Mounting Type :
Surface Mount
Surface Mount :
yes
Minimum Operating Temperature :
- 40 C
Supply Current-Max :
0.09 mA
Wideband :
No
Unity Gain BW-Nom :
730 kHz
Gain Bandwidth Product :
730kHz
Power Supplies :
2/5V
Average Bias Current-Max (IIB) :
0.005μA
Programmable Power :
No
Maximum Operating Supply Voltage :
6 V
Maximum Operating Temperature :
+ 125 C
Output Type :
Rail-to-Rail
Width :
3mm
Output Current per Channel :
27 mA
Number of Terminations :
8
Product :
Precision Amplifiers
Terminal Form :
NO LEAD
Factory Lead Time :
22 Weeks
Reach Compliance Code :
Compliant
Current - Supply :
60μA
Power Supply Rejection Ratio (PSRR) :
70dB
Number of Channels per Chip :
1
Terminal Position :
Dual
HTS Code :
8542.33.00.01
Voltage Gain dB :
115 dB
Bias Current-Max (IIB) @25C :
0.0001 µA
Voltage Gain :
115dB
RoHS Status :
ROHS3 Compliant
Shutdown :
No Shutdown
Supply Type :
Single
Brand :
Microchip Technology
Mount :
Surface Mount
Operating Supply Current :
60 uA
Micropower :
yes
Type :
General Purpose Amplifier
Terminal Finish :
Nickel/Palladium/Gold (Ni/Pd/Au)
Number of Channels :
1
Amplifier Type :
GENERAL PURPOSE
Packaging :
Tape and Reel (TR)
Bandwidth :
730 kHz
Supply Voltage Limit-Max :
7V
Product Type :
Precision Amplifiers
Frequency Compensation :
yes
Pin Count :
8
Time@Peak Reflow Temperature-Max (s) :
40
Operating Temperature :
-40°C~125°C
Base Product Number :
MCP6061
Product Category :
Precision Amplifiers
Mounting :
Surface Mount
Mounting Style :
SMD/SMT
Voltage Gain-Min :
56200
Datasheets
MCP6061T-E/MNY
Introducing Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP6061T-E/MNY from Chip IC,where excellence meets affordability. This product stands out with its Number of Pins:8, Base Part Number:MCP6061, Package / Case:8-WFDFN Exposed Pad, Mounting Type:Surface Mount, Number of Terminations:8, Type:General Purpose Amplifier, Number of Channels:1, Bandwidth:730 kHz, Operating Temperature:-40°C~125°C, MCP6061T-E/MNY pinout, MCP6061T-E/MNY datasheet PDF, MCP6061T-E/MNY amp .Beyond Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP6061T-E/MNY ,we also offer OP07CDR, TS321CX5 RFG, NE5532ADR, Our vast inventory has you covered. Contact us now for immediate solutions.

Microchip Technology MCP6061T-E/MNY


1 Channels 27 mA per Channel 1pA 72 dB Instrumentational OP Amps 0.005μA 4.5, 42 V 1.8V~6V MCP6061 8 Pins 8-WFDFN Exposed Pad

MCP6061T-E/MNY Overview


It is packaged in an 8-WFDFN Exposed Pad-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 150μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 60 uA can be used to operate this linear amplifier. There should be no change in the voltage gain at 115dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 4.5, 42 V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. For optimal performance, this electrical part should be connected to a supply with a current of 60μA. Buffer op amp series numbers are indicated by the --. This op amp ic can conduct a minimum voltage gain of 56200. There are 8 wire terminals on this op amp ic.

MCP6061T-E/MNY Features


8 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations


MCP6061T-E/MNY Applications


There are a lot of Microchip Technology
MCP6061T-E/MNY Instrumentational OP Amps applications.


  • Logarithmic operation circuits
  • Exponential operation circuits
  • Multiplication circuits
  • Division circuits
  • Precision measurement
  • Power control
  • Information processing
  • Weak signal detection
  • Signal amplification
  • Signal filtering
Purchase

You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • ROHM Semiconductor
    IC CMOS 2 CIRCUIT 8SOP
  • Diodes Incorporated
    IC OPAMP GP 1 CIRCUIT SOT25
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
  • Texas Instruments
    IC OPAMP GP 4 CIRCUIT 14SOIC
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
RFQ
BOM