MCP606-I/ST

Share

Or copy the link below:

Mfr.Part #
MCP606-I/ST
Manufacturer
Microchip Technology
Package / Case
8-TSSOP (0.173, 4.40mm Width)
Datasheet
Download
Description
IC OPAMP GP 1 CIRCUIT 8TSSOP
Stock
85
In Stock :
85

Request A Quote(RFQ)

* Fullname:
* Company:
* E-Mail:
  Phone:
  Comment:
* Quantity:
Manufacturer :
Microchip Technology
Product Category :
Instrumentation, OP Amps, Buffer Amps
Power Supply Type :
Single
Nominal Supply Current :
25μA
Mounting Style :
SMD/SMT
Published :
2003
Voltage Gain-Min :
100000
Voltage - Supply, Single/Dual (±) :
2.5V~6V
Base Part Number :
MCP606
Output Type :
Rail-to-Rail
Number of Elements :
1
Radiation Hardening :
No
Voltage - Input Offset :
250μV
Average Bias Current-Max (IIB) :
0.00008 µA
Number of Functions :
1
Power Supply Rejection Ratio (PSRR) :
80dB
Input Offset Voltage (Vos) :
250μV
Reach Compliance Code :
Compliant
Current - Input Bias :
1pA
Slew Rate :
0.08V/µs
Minimum Operating Temperature :
- 40 C
Micropower :
yes
Terminal Finish :
Matte Tin (Sn)
Architecture :
VOLTAGE-FEEDBACK
Product Status :
Active
Mounting :
Surface Mount
Moisture Sensitivity Level (MSL) :
1 (Unlimited)
Product Type :
Op Amps - Operational Amplifiers
Supplier Device Package :
8-TSSOP
Qualification Status :
Not Qualified
Packaging :
Tube
Input Offset Voltage-Max :
250 µV
Output Current :
17mA
Min Supply Voltage :
2.5 V
Shutdown :
No Shutdown
Supply Voltage :
5V
Supply Voltage Limit-Max :
7V
Height :
1mm
Programmable Power :
No
REACH SVHC :
No SVHC
Operating Temperature :
-40°C~85°C
Current - Output / Channel :
17mA
Supply Current-Max :
0.025 mA
Min Operating Temperature :
-40 °C
Unity Gain BW-Nom :
155 kHz
Package Shape :
RECTANGULAR
Supplier Package :
TSSOP
Width :
4.4mm
Lifecycle Status :
Production (Last Updated: 2 years ago)
Series :
--
Amplifier Type :
GENERAL PURPOSE
Base Product Number :
MCP606
JESD-609 Code :
e3
HTS Code :
8542.33.00.01
Manufacturer :
Microchip Technology Inc
JESD-30 Code :
R-PDSO-G8
Number of Channels :
1
Number of Amplifiers :
1
Terminal Pitch :
0.65mm
ECCN Code :
EAR99
Factory Lead Time :
12 Weeks
Frequency Compensation :
yes
Input Bias Current :
80 pA
Max Operating Temperature :
85 °C
Common Mode Rejection Ratio :
75 dB
Pbfree Code :
yes
Gain Bandwidth Product :
155 kHz
Max Supply Voltage :
6 V
Number of Pins :
8
Operating Supply Voltage :
5.5V
Type :
General Purpose Amplifier
Power Supplies :
3/5V
Mount :
Surface Mount
Output Current per Channel :
17 mA
Terminal Form :
Gull wing
Temperature Grade :
Industrial
Seated Height-Max :
1.2 mm
Low-Offset :
yes
Number of Circuits :
1
Maximum Operating Temperature :
+ 85 C
Package :
Tube
Package / Case :
8-TSSOP (0.173, 4.40mm Width)
Number of Terminations :
8
Bandwidth :
155 kHz
Time@Peak Reflow Temperature-Max (s) :
40
Power :
No
Lead Free :
Lead Free
Operating Supply Current :
18.7 uA
Number of Terminals :
8
Screening Level :
Industrial
Shut Down Support :
No
Product :
Operational Amplifiers
Current - Supply :
18.7μA
Maximum Operating Supply Voltage :
6 V
Terminal Position :
Dual
Pin Count :
8
Length :
3mm
Number of Channels per Chip :
1
RoHS :
Compliant
RoHS Status :
ROHS3 Compliant
Low-Bias :
yes
Surface Mount :
yes
Peak Reflow Temperature (Cel) :
260
Mounting Type :
Surface Mount
Wideband :
No
Voltage Gain :
121dB
Datasheets
MCP606-I/ST
Introducing Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP606-I/ST from Chip IC,where excellence meets affordability. This product stands out with its Base Part Number:MCP606, Operating Temperature:-40°C~85°C, Number of Channels:1, Number of Pins:8, Type:General Purpose Amplifier, Package / Case:8-TSSOP (0.173, 4.40mm Width), Number of Terminations:8, Bandwidth:155 kHz, Mounting Type:Surface Mount, MCP606-I/ST pinout, MCP606-I/ST datasheet PDF, MCP606-I/ST amp .Beyond Instrumentation, OP Amps, Buffer Amps Microchip Technology MCP606-I/ST ,we also offer OP07CDR, TS321CX5 RFG, NE5532ADR, Our vast inventory has you covered. Contact us now for immediate solutions.

Microchip Technology MCP606-I/ST


1 Channels 17 mA per Channel 1pA 75 dB Instrumentational OP Amps 0.00008 µA 5.5V 2.5V~6V MCP606 8 Pins 8-TSSOP (0.173, 4.40mm Width)

MCP606-I/ST Overview


In order to protect the op amps, a 8-TSSOP (0.173, 4.40mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 250μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 18.7 uA and 10 . Maintain 121dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. Buffer op amp is equipped with 1 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is recommended that the temperature of this op amp ic should not fall below -40 °C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 85 °C degrees. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5V. This electronic part is recommended to be used with an 18.7μA supply for best performance. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 6 V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.5 V when using it. -- is the number that corresponds to the series of the buffer op amp. A minimum voltage gain of 100000 is the minimum voltage gain that this instrumentation amplifier is capable of producing. A linear amplifier such as this has 1 amplifiers on it. As part of this op amp ic, there are 8 terminals on which wires can be connected.

MCP606-I/ST Features


8 Pins
supply voltage of 5V
121dB voltage gain
Output Type: Rail-to-Rail
8Terminations


MCP606-I/ST Applications


There are a lot of Microchip Technology
MCP606-I/ST Instrumentational OP Amps applications.


  • Differentiator circuits
  • Logarithmic operation circuits
  • Exponential operation circuits
  • Multiplication circuits
  • Division circuits
  • Precision measurement
  • Power control
  • Information processing
  • Weak signal detection
  • Signal amplification
Purchase

You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.

RFQ (Request for Quotations)

It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.

Payment Method

For your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.

IMPORTANT NOTICE

You may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.

Shipping Method

Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...

Shipping Cost

Shipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.

The basic freight (for package ≤0.5 KG ) depends on the time zones and countries

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.

Manufacturer related products

Catalog related products

  • ROHM Semiconductor
    IC CMOS 2 CIRCUIT 8SOP
  • Diodes Incorporated
    IC OPAMP GP 1 CIRCUIT SOT25
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
  • Texas Instruments
    IC OPAMP GP 4 CIRCUIT 14SOIC
  • Texas Instruments
    IC OPAMP GP 2 CIRCUIT 8SOIC
RFQ
BOM