MCP606-I/SN
- Mfr.Part #
- MCP606-I/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 2
- In Stock :
- 2
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Voltage Gain dB :
- 121 dB
- Output Current :
- 17mA
- Single Supply Voltage (Typ) :
- 3/5(V)
- Lead Free :
- Lead Free
- Bandwidth :
- 155 kHz
- Supplier Device Package :
- 8-SOIC
- Radiation Hardening :
- No
- Type :
- General Purpose Amplifier
- Voltage Gain-Min :
- 100000
- Number of Terminations :
- 8
- Min Supply Voltage :
- 2.5 V
- Slew Rate :
- 0.08V/µs
- Terminal Finish :
- Matte Tin (Sn)
- Input Offset Voltage :
- 0.25(mV)
- Single Supply Voltage (Min) :
- 2.5(V)
- Unity Gain Bandwidth Product :
- 0.155
- Package Type :
- SOIC N
- ECCN Code :
- EAR99
- Current - Input Bias :
- 1pA
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Minimum Operating Temperature :
- -40 °C
- RoHS :
- Compliant
- Maximum Operating Temperature :
- +85 °C
- Input Bias Current :
- 80 pA
- Product Type :
- Op Amps - Operational Amplifiers
- Width :
- 3.9116mm
- Package :
- Tube
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Number of Circuits :
- 1
- Input Voltage Range :
- 2.5 → 6 V
- Reach Compliance Code :
- Compliant
- Mounting Style :
- SMD/SMT
- Current - Supply :
- 18.7μA
- Frequency Compensation :
- yes
- Shutdown :
- No Shutdown
- Output Type :
- Rail-to-Rail
- Power Supply Rejection Ratio :
- 80(dB)
- Product :
- Operational Amplifiers
- Unity Gain BW-Nom :
- 155 kHz
- Common Mode Rejection Ratio :
- 75 dB
- Architecture :
- VOLTAGE-FEEDBACK
- Surface Mount :
- yes
- Qualification Status :
- Not Qualified
- Terminal Position :
- Dual
- Max Frequency :
- 1kHz
- Shut Down Support :
- No
- Qualification :
- AEC-Q100
- Manufacturer :
- Microchip
- Product Category :
- Operational Amplifiers - Op Amps
- Published :
- 2003
- Mount :
- Surface Mount
- Voltage - Input Offset :
- 250μV
- Max Supply Voltage :
- 6 V
- Pbfree Code :
- yes
- RoHS Status :
- ROHS3 Compliant
- Operating Temperature Classification :
- Industrial
- Supply Type :
- Single
- Voltage - Supply, Single/Dual (±) :
- 2.5V~6V
- Dual Supply Voltage (Min) :
- Not Required(V)
- HTS Code :
- 8542.33.00.01
- Output Current per Channel :
- 17 mA
- Number of Amplifiers :
- 1
- Supplier Package :
- SOIC N
- Maximum Operating Supply Voltage :
- 6 V
- Operating Supply Voltage :
- 5.5V
- Mounting :
- Surface Mount
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Screening Level :
- Industrial
- Shut Down Feature :
- No
- Programmable Power :
- No
- Micropower :
- yes
- Rad Hardened :
- No
- Operating Temp Range :
- -40C to 85C
- JESD-609 Code :
- e3
- Product Status :
- Active
- Brand :
- Microchip Technology / Atmel
- Voltage Gain :
- 121dB
- Supply Voltage :
- 5V
- Number of Elements :
- 1
- Number of Functions :
- 1
- Power Supplies :
- 3/5V
- Height :
- 1.2446mm
- Low-Offset :
- yes
- Input Offset Voltage-Max :
- 250 µV
- Min Operating Temperature :
- -40 °C
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Factory Lead Time :
- 8 Weeks
- Packaging :
- Tube
- Length :
- 4.8768mm
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Max Input Voltage :
- 6V
- Power Supply Rejection Ratio (PSRR) :
- 80dB
- Power Supply Requirement :
- Single
- Seated Height-Max :
- 1.75 mm
- Base Product Number :
- MCP606
- Number of Terminals :
- 8
- Rail to Rail :
- Rail to Rail Output
- Single Supply Voltage (Max) :
- 6(V)
- Package Shape :
- RECTANGULAR
- Mounting Type :
- Surface Mount
- Number of Channels per Chip :
- 1
- Terminal Pitch :
- 1.27 mm
- Gain Bandwidth Product :
- 155 kHz
- Power Supply Type :
- Single
- Nominal Supply Current :
- 25μA
- Current - Output / Channel :
- 17mA
- Max Operating Temperature :
- 85 °C
- Dual Supply Voltage (Max) :
- Not Required(V)
- Amplifier Type :
- GENERAL PURPOSE
- Temperature Grade :
- Industrial
- Maximum Input Voltage :
- 6 V
- Pin Count :
- 8
- Power :
- No
- Base Part Number :
- MCP606
- Wideband :
- No
- Peak Reflow Temperature (Cel) :
- 260
- Average Bias Current-Max (IIB) :
- 0.00008 µA
- Voltage Gain in dB :
- 121(dB)
- Terminal Form :
- Gull wing
- MSL :
- MSL 1 - Unlimited
- Number of Channels :
- 1
- Input Offset Voltage (Vos) :
- 250μV
- Series :
- --
- Low-Bias :
- yes
- JESD-30 Code :
- R-PDSO-G8
- Supply Voltage Limit-Max :
- 7V
- Supply Current-Max :
- 0.025 mA
- Number of Pins :
- 8
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Operating Temperature :
- -40°C~85°C
- Min Input Voltage :
- 2.5V
- REACH SVHC :
- No SVHC
- Rail/Rail I/O Type :
- Rail to Rail Output
- Dimensions :
- 4.9 x 3.9 x 1.25mm
- Operating Supply Current :
- 25 uA
- Datasheets
- MCP606-I/SN

1 Channels 17 mA per Channel 1pA 75 dB Instrumentational OP Amps 0.00008 µA 5.5V 2.5V~6V MCP606 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP606-I/SN Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 250μV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 25 uA . 121dB should be the voltage gain. A linear amplifier like this has 1 circuits on it. Op amp ic has 1 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. In order for this buffer op amp to function, it should have a temperature of at least -40 °C degrees Celsius. At temperatures greater than 85 °C, Instrumentation amplifier should not be used. There are 1 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.5V. We recommend that you use this electronic part with an 18.7μA supply in order to get the best performance from it. The electrical part is capable of being powered by a voltage of under 6 V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.5 V. The -- represents the op amp's series number. This operational amplifier can conduct a voltage gain of up to 100000 at a minimum. On the linear amplifier, there are 1 amplifiers that are used. A total of 8 terminals are available on this buffer op amp for the connection of wires.
MCP606-I/SN Features
8 Pins
supply voltage of 5V
121dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP606-I/SN Applications
There are a lot of Microchip Technology
MCP606-I/SN Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















