MCP6052T-E/MNY
- Mfr.Part #
- MCP6052T-E/MNY
- Manufacturer
- Microchip Technology
- Package / Case
- 8-WFDFN Exposed Pad
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8TDFN
- Stock
- 7,751
- In Stock :
- 7,751
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Reach Compliance Code :
- Compliant
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Nominal Supply Current :
- 30µA
- JESD-30 Code :
- R-PDSO-N8
- Voltage - Input Offset :
- 150μV
- Supply Voltage Limit-Max :
- 7V
- JESD-609 Code :
- e4
- Package Shape :
- RECTANGULAR
- Amplifier Type :
- GENERAL PURPOSE
- Bandwidth :
- 385 kHz
- Common Mode Rejection Ratio :
- 72 dB
- Surface Mount :
- yes
- Number of Channels :
- 2
- Terminal Form :
- NO LEAD
- Type :
- General Purpose Amplifier
- Supply Current-Max :
- 0.09 mA
- Voltage Gain dB :
- 115 dB
- Minimum Operating Temperature :
- - 40 C
- Series :
- --
- Lead Free :
- Lead Free
- Temperature Grade :
- Automotive
- Current - Supply :
- 30µA
- Current - Output / Channel :
- 26 mA
- Operating Temperature :
- -40°C~125°C
- Average Bias Current-Max (IIB) :
- 0.0001μA
- Factory Lead Time :
- 9 Weeks
- Radiation Hardening :
- No
- Brand :
- Microchip Technology
- Terminal Pitch :
- 0.5mm
- Base Part Number :
- MCP6052
- Mount :
- Surface Mount
- Number of Circuits :
- 2
- Packaging :
- Tape and Reel (TR)
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Input Offset Voltage-Max :
- 150 µV
- Operating Supply Current :
- 30µA
- Input Offset Voltage (Vos) :
- 150μV
- HTS Code :
- 8542.33.00.01
- Shutdown :
- No Shutdown
- Number of Pins :
- 8
- Number of Channels per Chip :
- 2
- Low-Offset :
- yes
- Slew Rate :
- 0.15V/µs
- Manufacturer :
- Microchip
- Maximum Operating Temperature :
- + 125 C
- Height :
- 750μm
- Voltage Gain :
- 115dB
- Output Current :
- 26mA
- Unity Gain BW-Nom :
- 385 kHz
- Terminal Position :
- Dual
- Power Supplies :
- 2/5 V
- RoHS :
- Details
- Length :
- 2mm
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Pbfree Code :
- yes
- Published :
- 2010
- Mounting Style :
- SMD/SMT
- Supplier Device Package :
- 8-TDFN (2x3)
- Base Product Number :
- MCP6052
- Supply Type :
- Single
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Operating Supply Voltage :
- 6 V
- Supply Voltage :
- 3V
- Qualification Status :
- Not Qualified
- Product Category :
- Precision Amplifiers
- Bias Current-Max (IIB) @25C :
- 0.0001μA
- RoHS Status :
- ROHS3 Compliant
- Voltage Gain-Min :
- 56200
- Mounting Type :
- Surface Mount
- Peak Reflow Temperature (Cel) :
- 260
- Product Status :
- Active
- Low-Bias :
- yes
- Screening Level :
- Extended
- Micropower :
- yes
- Number of Terminals :
- 8
- Output Current per Channel :
- 26mA
- Mounting :
- Surface Mount
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- REACH SVHC :
- No SVHC
- Output Type :
- Rail-to-Rail
- Qualification :
- AEC-Q100
- Gain Bandwidth Product :
- 385kHz
- Number of Functions :
- 2
- Package / Case :
- 8-WFDFN Exposed Pad
- Maximum Operating Supply Voltage :
- 6 V
- Product :
- Precision Amplifiers
- Product Type :
- Precision Amplifiers
- Number of Terminations :
- 8
- ECCN Code :
- EAR99
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Supplier Package :
- TDFN EP
- Width :
- 3mm
- Seated Height-Max :
- 0.8 mm
- Frequency Compensation :
- yes
- Architecture :
- VOLTAGE-FEEDBACK
- Current - Input Bias :
- 1pA
- Pin Count :
- 8
- Packing Method :
- Tape and Reel
- Datasheets
- MCP6052T-E/MNY

2 Channels 26mA per Channel 1pA 72 dB Instrumentational OP Amps 0.0001μA 6 V 1.8V~6V MCP6052 8 Pins 8-WFDFN Exposed Pad
MCP6052T-E/MNY Overview
In order to protect the op amps, a 8-WFDFN Exposed Pad case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 150μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 30μA and 10 . Maintain 115dB as the voltage gain. In total, there are 2 circuits on this buffer amplifier. Buffer op amp is equipped with 2 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 6 V. As a result of this, the buffer amplifier is packed in TAPE AND REEL. This electronic part is recommended to be used with an 30µA supply for best performance. -- is the number that corresponds to the series of the buffer op amp. A minimum voltage gain of 56200 is the minimum voltage gain that this instrumentation amplifier is capable of producing. As part of this op amp ic, there are 8 terminals on which wires can be connected.
MCP6052T-E/MNY Features
8 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6052T-E/MNY Applications
There are a lot of Microchip Technology
MCP6052T-E/MNY Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















