MCP6051-E/SN
- Mfr.Part #
- MCP6051-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 12,279
- In Stock :
- 12,279
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Architecture :
- VOLTAGE-FEEDBACK
- HTS Code :
- 8542.33.00.01
- Lead Free :
- Lead Free
- Supply Type :
- Single
- Number of Functions :
- 1
- Number of Channels :
- 1
- Mounting :
- Surface Mount
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Supply Current-Max :
- 0.045 mA
- Number of Pins :
- 8
- Voltage Gain :
- 115dB
- Output Current :
- 26mA
- Reach Compliance Code :
- Compliant
- Screening Level :
- Extended
- Temperature Grade :
- Automotive
- Mounting Type :
- Surface Mount
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Current - Input Bias :
- 1pA
- Published :
- 2000
- Number of Terminations :
- 8
- Power :
- No
- Base Product Number :
- MCP6051
- Unity Gain BW-Nom :
- 385 kHz
- Pbfree Code :
- yes
- Type :
- General Purpose Amplifier
- Output Current per Channel :
- 26 mA
- Product :
- Precision Amplifiers
- Voltage Gain-Min :
- 56200
- Time@Peak Reflow Temperature-Max (s) :
- 40
- RoHS :
- Details
- Product Category :
- Precision Amplifiers
- Operating Supply Voltage :
- 6 V
- Bias Current-Max (IIB) @25C :
- 0.0001 µA
- Height :
- 1.2446mm
- Average Bias Current-Max (IIB) :
- 0.0001 µA
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Number of Channels per Chip :
- 1
- Maximum Operating Supply Voltage :
- 6 V
- Base Part Number :
- MCP6051
- Peak Reflow Temperature (Cel) :
- 260
- Factory Lead Time :
- 21 Weeks
- JESD-30 Code :
- R-PDSO-G8
- Voltage Gain dB :
- 115 dB
- Mounting Style :
- SMD/SMT
- Wideband :
- No
- Input Offset Voltage-Max :
- 150 µV
- Supply Voltage Limit-Max :
- 7V
- JESD-609 Code :
- e3
- Manufacturer :
- Microchip
- Brand :
- Microchip Technology
- Supply Voltage :
- 3V
- Programmable Power :
- No
- Terminal Pitch :
- 1.27 mm
- Radiation Hardening :
- No
- REACH SVHC :
- No SVHC
- Shutdown :
- No Shutdown
- Packaging :
- Tube
- Pin Count :
- 8
- Supplier Device Package :
- 8-SOIC
- Series :
- --
- Supplier Package :
- SOIC N
- Minimum Operating Temperature :
- - 40 C
- Mount :
- Surface Mount
- Nominal Supply Current :
- 30µA
- Length :
- 4.8768mm
- Low-Offset :
- yes
- MSL :
- MSL 1 - Unlimited
- Power Supplies :
- 2/5V
- Micropower :
- yes
- Operating Supply Current :
- 30 uA
- Frequency Compensation :
- yes
- Number of Circuits :
- 1
- Slew Rate :
- 0.15V/µs
- Surface Mount :
- yes
- RoHS Status :
- ROHS3 Compliant
- Maximum Operating Temperature :
- + 125 C
- Qualification Status :
- Not Qualified
- Output Type :
- Rail-to-Rail
- Current - Supply :
- 30µA
- Common Mode Rejection Ratio :
- 72 dB
- Input Offset Voltage (Vos) :
- 150μV
- Product Status :
- Active
- Gain Bandwidth Product :
- 385kHz
- Terminal Position :
- Dual
- Package :
- Tube
- Low-Bias :
- yes
- Amplifier Type :
- GENERAL PURPOSE
- Number of Terminals :
- 8
- Seated Height-Max :
- 1.75 mm
- Product Type :
- Precision Amplifiers
- Width :
- 3.9116mm
- Package Shape :
- RECTANGULAR
- Voltage - Input Offset :
- 150μV
- ECCN Code :
- EAR99
- Bandwidth :
- 385kHz
- Operating Temperature :
- -40°C~125°C
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Terminal Form :
- Gull wing
- Qualification :
- AEC-Q100
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Datasheets
- MCP6051-E/SN

1 Channels 26 mA per Channel 1pA 72 dB Instrumentational OP Amps 0.0001 µA 6 V 1.8V~6V MCP6051 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6051-E/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 3V battery. The op amp ic has an array of 8 pins on it. Op amp rates 150μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 30 uA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 115dB at all times. A instrumentation amplifier like this has 1 circuits. On the buffer amps, there are 1 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 6 V. There is a recommendation that this electrical part be used with a supply with 30μA current rating. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 56200. 8 wire terminals are provided on this op amp.
MCP6051-E/SN Features
8 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6051-E/SN Applications
There are a lot of Microchip Technology
MCP6051-E/SN Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















