MCP604T-E/SL
- Mfr.Part #
- MCP604T-E/SL
- Manufacturer
- Microchip Technology
- Package / Case
- 14-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC CMOS 4 CIRCUIT 14SOIC
- Stock
- 7,376
- In Stock :
- 7,376
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Slew Rate :
- 2.3V/µs
- Terminal Position :
- Dual
- Published :
- 2005
- Supply Type :
- Single
- Surface Mount :
- yes
- Product Category :
- Operational Amplifiers - Op Amps
- Shutdown :
- No Shutdown
- Current - Output / Channel :
- 22mA
- Number of Functions :
- 4
- Input Offset Voltage-Max :
- 4500 µV
- Width :
- 3.9 mm
- Brand :
- Microchip Technology / Atmel
- Voltage - Input Offset :
- 700µV
- Micropower :
- yes
- Gain Bandwidth Product :
- 2.8MHz
- Manufacturer :
- Microchip
- Output Type :
- Rail-to-Rail
- Height Seated (Max) :
- 1.75mm
- Unity Gain BW-Nom :
- 2800 kHz
- ECCN Code :
- EAR99
- Qualification Status :
- Not Qualified
- Current - Supply :
- 230μA
- Number of Channels :
- 4 Channel
- Number of Circuits :
- 4
- RoHS Status :
- ROHS3 Compliant
- Pbfree Code :
- yes
- Mounting Type :
- Surface Mount
- Current - Input Bias :
- 1pA
- Frequency Compensation :
- yes
- RoHS :
- Details
- Product :
- Operational Amplifiers
- Supply Voltage :
- 5V
- Supply Voltage Limit-Max :
- 7V
- HTS Code :
- 8542.33.00.01
- Length :
- 8.69mm
- Temperature Grade :
- Automotive
- Number of Terminations :
- 14
- Product Type :
- Op Amps - Operational Amplifiers
- JESD-30 Code :
- R-PDSO-G14
- Seated Height-Max :
- 1.75 mm
- Height :
- 1.25 mm (Min)
- Common Mode Rejection Ratio :
- 90 dB
- Minimum Operating Temperature :
- - 40 C
- JESD-609 Code :
- e3
- Product Status :
- Active
- Amplifier Type :
- GENERAL PURPOSE
- Mounting Style :
- SMD/SMT
- Operating Supply Current :
- 23 uA
- Series :
- --
- Reach Compliance Code :
- Compliant
- Package / Case :
- 14-SOIC (0.154, 3.90mm Width)
- Pin Count :
- 14
- Voltage - Supply, Single/Dual (±) :
- 2.7V~6V
- Operating Temperature :
- -40°C~125°C
- Low-Bias :
- yes
- Voltage Gain dB :
- 115 dB
- Number of Terminals :
- 14
- Supplier Device Package :
- 14-SOIC
- Packaging :
- Tape and Reel (TR)
- Base Product Number :
- MCP604
- Maximum Operating Temperature :
- + 125 C
- Base Part Number :
- MCP604
- Power Supplies :
- 3/5V
- Architecture :
- VOLTAGE-FEEDBACK
- Terminal Finish :
- Matte Tin (Sn)
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Factory Lead Time :
- 12 Weeks
- Qualification :
- AEC-Q100
- Package Shape :
- RECTANGULAR
- Low-Offset :
- No
- Operating Supply Voltage :
- 2.7 V to 5.5 V
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Packing Method :
- Tape and Reel
- Supply Current-Max :
- 1.3 mA
- Average Bias Current-Max (IIB) :
- 0.005μA
- Output Current per Channel :
- 22 mA
- Terminal Form :
- Gull wing
- Terminal Pitch :
- 1.27mm
- Peak Reflow Temperature (Cel) :
- 260
- Voltage Gain-Min :
- 56200
- Datasheets
- MCP604T-E/SL
MCP604T-E/SL Documents

4 Channel Channels 22 mA per Channel 1pA 90 dB Instrumentational OP Amps 0.005μA 2.7 V to 5.5 V 2.7V~6V MCP604 14 Pins 14-SOIC (0.154, 3.90mm Width)
MCP604T-E/SL Overview
In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. This linear amplifier should be powered by an 5V battery. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 23 uA supply current, this operational amplifier ics can be operated. A instrumentation amplifier like this has 4 circuits. On the buffer amps, there are 4 Channel channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 2.7 V to 5.5 V. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a recommendation that this electrical part be used with a supply with 230μA current rating. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 56200. 14 wire terminals are provided on this op amp.
MCP604T-E/SL Features
14 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
14Terminations
MCP604T-E/SL Applications
There are a lot of Microchip Technology
MCP604T-E/SL Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















