MCP6043-E/P
- Mfr.Part #
- MCP6043-E/P
- Manufacturer
- Microchip Technology
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8DIP
- Stock
- 750
- In Stock :
- 750
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Mounting Type :
- Through Hole
- Pin Count :
- 8
- Qualification Status :
- Not Qualified
- Base Product Number :
- MCP6043
- Terminal Pitch :
- 2.54mm
- Minimum Operating Temperature :
- - 40 C
- Bandwidth :
- 14 kHz
- Maximum Operating Supply Voltage :
- 6 V
- Product Status :
- Active
- Terminal Position :
- Dual
- Frequency Compensation :
- yes
- Current - Supply :
- 600nA
- Number of Channels per Chip :
- 1
- JESD-30 Code :
- R-PDIP-T8
- Current - Input Bias :
- 1pA
- Type :
- General Purpose Amplifier
- Number of Circuits :
- 1
- Supplier Package :
- PDIP
- Operating Supply Current :
- 600nA
- RoHS Status :
- ROHS3 Compliant
- Supplier Device Package :
- 8-PDIP
- Output Current :
- 21mA
- Reach Compliance Code :
- Compliant
- Length :
- 10.16mm
- ECCN Code :
- EAR99
- Voltage Gain dB :
- 115 dB
- Unity Gain BW-Nom :
- 14 kHz
- Voltage Gain :
- 115dB
- Seated Height-Max :
- 5.334 mm
- Output Type :
- Rail-to-Rail
- Power Supplies :
- 1.5/5 V
- Average Bias Current-Max (IIB) :
- 0.005μA
- Supply Voltage :
- 5V
- Packaging :
- Tube
- Number of Pins :
- 8
- Supply Type :
- Single
- Output Current per Channel :
- 20mA
- Package :
- Tube
- Product :
- Operational Amplifiers
- Lead Free :
- Lead Free
- Packing Method :
- Tube
- Architecture :
- VOLTAGE-FEEDBACK
- Terminal Form :
- THROUGH-HOLE
- JESD-609 Code :
- e3
- Surface Mount :
- No
- Screening Level :
- Extended
- Voltage - Input Offset :
- 3mV
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Radiation Hardening :
- No
- Nominal Supply Current :
- 600nA
- Input Offset Voltage (Vos) :
- 3mV
- Number of Terminations :
- 8
- Gain Bandwidth Product :
- 14kHz
- Supply Voltage Limit-Max :
- 7V
- Wideband :
- No
- Voltage Gain-Min :
- 56200
- Voltage - Supply, Single/Dual (±) :
- 1.4V~6V
- Pbfree Code :
- yes
- Shutdown :
- No Shutdown
- Slew Rate :
- 0.003V/μs
- Width :
- 7.112mm
- Mount :
- Through Hole
- Mounting :
- Through Hole
- HTS Code :
- 8542.33.00.01
- Height :
- 4.953mm
- Power :
- No
- Mounting Style :
- Through Hole
- REACH SVHC :
- No SVHC
- Micropower :
- yes
- Maximum Operating Temperature :
- + 125 C
- Low-Bias :
- yes
- Product Type :
- Op Amps - Operational Amplifiers
- Published :
- 2002
- Programmable Power :
- No
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Number of Terminals :
- 8
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Series :
- --
- Low-Offset :
- No
- Power Supply Type :
- Single
- Number of Channels :
- 1
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- Qualification :
- AEC-Q100
- Base Part Number :
- MCP6043
- Number of Functions :
- 1
- Brand :
- Microchip Technology
- Operating Temperature :
- -40°C~125°C
- Shut Down Support :
- No
- Common Mode Rejection Ratio :
- 60 dB
- Input Offset Voltage-Max :
- 3000 µV
- Supply Current-Max :
- 0.001 mA
- Peak Reflow Temperature (Cel) :
- Not Applicable
- Manufacturer :
- Microchip
- Product Category :
- Operational Amplifiers - Op Amps
- RoHS :
- Details
- Temperature Grade :
- Automotive
- Operating Supply Voltage :
- 5.5V
- Factory Lead Time :
- 10 Weeks
- Amplifier Type :
- GENERAL PURPOSE
- Package Shape :
- RECTANGULAR
- Datasheets
- MCP6043-E/P

1 Channels 20mA per Channel 1pA 60 dB Instrumentational OP Amps 0.005μA 5.5V 1.4V~6V MCP6043 8 Pins 8-DIP (0.300, 7.62mm)
MCP6043-E/P Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 3mV. This electronic component is recommended to be mounted using the mounting type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 600nA and 10 . Maintain 115dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. Buffer op amp is equipped with 1 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 5.5V. As a result of this, the buffer amplifier is packed in TUBE. This electronic part is recommended to be used with an 600nA supply for best performance. -- is the number that corresponds to the series of the buffer op amp. A minimum voltage gain of 56200 is the minimum voltage gain that this instrumentation amplifier is capable of producing. As part of this op amp ic, there are 8 terminals on which wires can be connected.
MCP6043-E/P Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6043-E/P Applications
There are a lot of Microchip Technology
MCP6043-E/P Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















