MCP6042T-E/MS
- Mfr.Part #
- MCP6042T-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8MSOP
- Stock
- 21,942
- In Stock :
- 21,942
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Channels :
- 2 Channel
- RoHS Status :
- ROHS3 Compliant
- Nominal Supply Current :
- 600nA
- Mounting Style :
- SMD/SMT
- Number of Circuits :
- 2
- Minimum Operating Temperature :
- - 40 C
- Base Part Number :
- MCP6042
- Length :
- 3mm
- Number of Functions :
- 1
- Product Status :
- Active
- Current - Supply :
- 600nA
- Moisture Sensitivity Level (MSL) :
- 2 (1 Year)
- Number of Elements :
- 2
- RoHS :
- Details
- Input Offset Voltage-Max :
- 3000 µV
- Maximum Operating Temperature :
- + 125 C
- Supplier Device Package :
- 8-MSOP
- Supply Voltage :
- 5V
- Voltage Gain dB :
- 115 dB
- Operating Temperature :
- -40°C~125°C
- Pin Count :
- 8
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Gain Bandwidth Product :
- 14kHz
- ECCN Code :
- EAR99
- Published :
- 2004
- Pbfree Code :
- yes
- Supply Voltage Limit-Max :
- 7V
- Output Current per Channel :
- 30 mA
- Supply Type :
- Single
- Package Shape :
- Square
- Lead Free :
- Lead Free
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Output Current :
- 21mA
- Surface Mount :
- yes
- Terminal Pitch :
- 0.65mm
- Manufacturer :
- Microchip
- Input Offset Voltage (Vos) :
- 3mV
- Type :
- General Purpose Amplifier
- Common Mode Rejection Ratio :
- 60 dB
- Peak Reflow Temperature (Cel) :
- 260
- Output Type :
- Rail-to-Rail
- Number of Channels per Chip :
- 2
- Voltage - Supply, Single/Dual (±) :
- 1.4V~6V
- Number of Terminals :
- 8
- Terminal Form :
- Gull wing
- Unity Gain BW-Nom :
- 14 kHz
- Product :
- Operational Amplifiers
- Supplier Package :
- MSOP
- Average Bias Current-Max (IIB) :
- 0.005μA
- Radiation Hardening :
- No
- Base Product Number :
- MCP6042
- HTS Code :
- 8542.33.00.01
- Series :
- -
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Packaging :
- Tape and Reel (TR)
- Terminal Position :
- Dual
- Slew Rate :
- 0.003V/μs
- Number of Terminations :
- 8
- Factory Lead Time :
- 7 Weeks
- Height Seated (Max) :
- 1.1mm
- Seated Height-Max :
- 1.1 mm
- Width :
- 3 mm
- Brand :
- Microchip Technology
- Current - Input Bias :
- 1pA
- Screening Level :
- Extended
- Mounting Type :
- Surface Mount
- Maximum Operating Supply Voltage :
- 6 V
- Operating Supply Current :
- 600 nA
- Mounting :
- Surface Mount
- Operating Supply Voltage :
- 5.5V
- Temperature Grade :
- Automotive
- Voltage Gain :
- 115dB
- Product Category :
- Operational Amplifiers - Op Amps
- JESD-30 Code :
- S-PDSO-G8
- Product Type :
- Op Amps - Operational Amplifiers
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Mount :
- Surface Mount
- Reach Compliance Code :
- Compliant
- Qualification Status :
- Not Qualified
- Voltage - Input Offset :
- 3 mV
- Current - Output / Channel :
- 20 mA
- Number of Pins :
- 8
- Qualification :
- AEC-Q100
- Shutdown :
- No Shutdown
- Height :
- 0.85 mm
- JESD-609 Code :
- e3
- Amplifier Type :
- GENERAL PURPOSE
- Datasheets
- MCP6042T-E/MS
MCP6042T-E/MS Documents

2 Channel Channels 30 mA per Channel 1pA 60 dB Instrumentational OP Amps 0.005μA 5.5V 1.4V~6V MCP6042 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6042T-E/MS Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 600 nA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 2 circuits that are connected together. There are 2 Channel channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. There are a total of 2 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.5V. As a recommendation, this electronic component should be used with a power supply that can deliver 600nA. The - indicates the series number of the op amp. In order to connect the buffer amplifier to the wires, it is equipped with 8 terminals.
MCP6042T-E/MS Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6042T-E/MS Applications
There are a lot of Microchip Technology
MCP6042T-E/MS Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















