MCP6041T-E/SN
- Mfr.Part #
- MCP6041T-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 1
- In Stock :
- 1
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Elements :
- 1
- Low-Offset :
- No
- Current - Supply :
- 600nA
- Output Current :
- 21mA
- Manufacturer :
- Microchip
- Series :
- --
- Pin Count :
- 8
- Product :
- Operational Amplifiers
- Current - Input Bias :
- 1pA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Slew Rate :
- 0.003V/μs
- Common Mode Rejection Ratio :
- 60 dB
- Voltage - Input Offset :
- 3mV
- Input Offset Voltage (Vos) :
- 3mV
- Supplier Device Package :
- 8-SOIC
- Number of Pins :
- 8
- Minimum Operating Temperature :
- - 40 C
- Number of Channels :
- 1 Channel
- RoHS Status :
- ROHS3 Compliant
- Low-Bias :
- yes
- Maximum Operating Temperature :
- + 125 C
- Shutdown :
- No Shutdown
- Frequency Compensation :
- yes
- Voltage Gain dB :
- 115 dB
- Product Type :
- Op Amps - Operational Amplifiers
- Number of Terminations :
- 8
- Qualification :
- AEC-Q100
- Supply Type :
- Single
- Terminal Form :
- Gull wing
- Lead Free :
- Lead Free
- Factory Lead Time :
- 10 Weeks
- Product Category :
- Operational Amplifiers - Op Amps
- Architecture :
- VOLTAGE-FEEDBACK
- Output Type :
- Rail-to-Rail
- Supply Voltage :
- 5V
- Nominal Supply Current :
- 600nA
- Peak Reflow Temperature (Cel) :
- 260
- Mount :
- Surface Mount
- Brand :
- Microchip Technology / Atmel
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Operating Supply Voltage :
- 5.5V
- Height :
- 1.25 mm
- RoHS :
- Details
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Wideband :
- No
- Amplifier Type :
- GENERAL PURPOSE
- Length :
- 4.9mm
- Base Product Number :
- MCP6041
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Number of Circuits :
- 1
- Terminal Position :
- Dual
- Base Part Number :
- MCP6041
- Operating Supply Current :
- 600 nA
- Micropower :
- yes
- Published :
- 2008
- Pbfree Code :
- yes
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Voltage - Supply, Single/Dual (±) :
- 1.4V~6V
- Width :
- 3.9 mm
- Operating Temperature :
- -40°C~125°C
- Number of Functions :
- 1
- Unity Gain BW-Nom :
- 14 kHz
- Output Current per Channel :
- 30 mA
- JESD-609 Code :
- e3
- Average Bias Current-Max (IIB) :
- 0.005μA
- Mounting Type :
- Surface Mount
- Voltage Gain :
- 115dB
- ECCN Code :
- EAR99
- Programmable Power :
- No
- Radiation Hardening :
- No
- Product Status :
- Active
- Supply Voltage Limit-Max :
- 7V
- Mounting Style :
- SMD/SMT
- Packaging :
- Tape and Reel (TR)
- Packing Method :
- Tape and Reel
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Gain Bandwidth Product :
- 14kHz
- Datasheets
- MCP6041T-E/SN

1 Channel Channels 30 mA per Channel 1pA 60 dB Instrumentational OP Amps 0.005μA 5.5V 1.4V~6V MCP6041 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6041T-E/SN Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 3mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 600 nA and 10 . Maintain 115dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. Buffer op amp is equipped with 1 Channel channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5V. As a result of this, the buffer amplifier is packed in TAPE AND REEL. This electronic part is recommended to be used with an 600nA supply for best performance. -- is the number that corresponds to the series of the buffer op amp.
MCP6041T-E/SN Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6041T-E/SN Applications
There are a lot of Microchip Technology
MCP6041T-E/SN Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















