MCP604-I/ST
- Mfr.Part #
- MCP604-I/ST
- Manufacturer
- Microchip Technology
- Package / Case
- 14-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC CMOS 4 CIRCUIT 14TSSOP
- Stock
- 8,887
- In Stock :
- 8,887
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Power Supply Rejection Ratio (PSRR) :
- 80dB
- Power Supplies :
- 3/5V
- Low-Bias :
- yes
- Lead Free :
- Lead Free
- JESD-30 Code :
- R-PDSO-G14
- Packaging :
- Tube
- Product Status :
- Active
- Height :
- 0.9 mm
- Supply Current-Max :
- 1.3 mA
- Unity Gain BW-Nom :
- 2800 kHz
- Height Seated (Max) :
- 1.1mm
- Output Type :
- Rail-to-Rail
- Number of Channels per Chip :
- 4
- Micropower :
- yes
- Frequency Compensation :
- yes
- Base Part Number :
- MCP604
- Nominal Supply Current :
- 230μA
- Number of Pins :
- 14
- Gain Bandwidth Product :
- 2.8 MHz
- Width :
- 4.4 mm
- Reach Compliance Code :
- Compliant
- Supplier Package :
- TSSOP
- Output Current per Channel :
- 22 mA
- Length :
- 5mm
- Factory Lead Time :
- 12 Weeks
- Temperature Grade :
- Industrial
- Current - Supply :
- 230µA (x2 Channels)
- Maximum Operating Supply Voltage :
- 6 V
- Bandwidth :
- 2.8MHz
- JESD-609 Code :
- e3
- Terminal Form :
- Gull wing
- Supplier Device Package :
- 14-TSSOP
- Qualification :
- AEC-Q100
- Screening Level :
- Industrial
- Pbfree Code :
- yes
- Voltage - Supply, Single/Dual (±) :
- 2.7V~6V
- Mounting :
- Surface Mount
- Product Category :
- Operational Amplifiers - Op Amps
- Input Offset Voltage (Vos) :
- 2mV
- Mount :
- Surface Mount
- Mounting Type :
- Surface Mount
- Mounting Style :
- SMD/SMT
- RoHS Status :
- ROHS3 Compliant
- Peak Reflow Temperature (Cel) :
- 260
- Published :
- 2000
- Supply Type :
- Single
- Terminal Position :
- Dual
- Number of Functions :
- 4
- Supply Voltage :
- 5V
- Package / Case :
- 14-TSSOP (0.173, 4.40mm Width)
- MSL :
- MSL 1 - Unlimited
- Series :
- MCP604
- Type :
- General Purpose Amplifier
- Voltage Gain :
- 115dB
- Minimum Operating Temperature :
- - 40 C
- Maximum Operating Temperature :
- + 85 C
- Terminal Pitch :
- 0.65mm
- Number of Circuits :
- 4
- Shutdown :
- No Shutdown
- HTS Code :
- 8542.33.00.01
- Pin Count :
- 14
- Terminal Finish :
- Matte Tin (Sn)
- Amplifier Type :
- GENERAL PURPOSE
- REACH SVHC :
- No SVHC
- Radiation Hardening :
- No
- Voltage Gain-Min :
- 56200
- Operating Supply Voltage :
- 5.5V
- Base Product Number :
- MCP604
- Current - Output / Channel :
- 22 mA
- Number of Terminations :
- 14
- Number of Channels :
- 4
- Voltage - Input Offset :
- 700µV
- Operating Supply Current :
- 23 uA
- Architecture :
- VOLTAGE-FEEDBACK
- Output Current :
- 22mA
- Manufacturer :
- Microchip
- Current - Input Bias :
- 1pA
- RoHS :
- Details
- ECCN Code :
- EAR99
- Package :
- Tube
- Supply Voltage Limit-Max :
- 7V
- Number of Terminals :
- 14
- Slew Rate :
- 2.3V/µs
- Common Mode Rejection Ratio :
- 75 dB
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Seated Height-Max :
- 1.1 mm
- Power Supply Type :
- Single
- Shut Down Support :
- No
- Qualification Status :
- Not Qualified
- Product :
- Operational Amplifiers
- Low-Offset :
- No
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Input Offset Voltage-Max :
- 3000 µV
- Surface Mount :
- yes
- Voltage Gain dB :
- 115 dB
- Product Type :
- Op Amps - Operational Amplifiers
- Brand :
- Microchip Technology / Atmel
- Package Shape :
- RECTANGULAR
- Operating Temperature :
- -40°C~85°C
- Datasheets
- MCP604-I/ST

4 Channels 22 mA per Channel 1pA 75 dB Instrumentational OP Amps 0.00006μA 5.5V 2.7V~6V MCP604 14 Pins 14-TSSOP (0.173, 4.40mm Width)
MCP604-I/ST Overview
In the package, you will find a 14-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 14 pins on it. Op amp rates 2mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 23 uA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 115dB for the time being. A instrumentation amplifier like this has 4 circuits. On the buffer amps, there are 4 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 5.5V. There is a recommendation that this electrical part be used with a supply with 230µA (x2 Channels) current rating. In this case, MCP604 represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 56200. 14 wire terminals are provided on this op amp.
MCP604-I/ST Features
14 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
14Terminations
MCP604-I/ST Applications
There are a lot of Microchip Technology
MCP604-I/ST Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















