MCP6033T-E/MC
- Mfr.Part #
- MCP6033T-E/MC
- Manufacturer
- Microchip Technology
- Package / Case
- 8-VFDFN Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8DFN
- Stock
- 28,588
- In Stock :
- 28,588
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Qualification :
- AEC-Q100
- Output Current per Channel :
- 23mA
- Peak Reflow Temperature (Cel) :
- 260
- Type :
- General Purpose Amplifier
- Supply Type :
- Single
- Architecture :
- VOLTAGE-FEEDBACK
- Packing Method :
- Tape and Reel
- Input Offset Voltage (Vos) :
- 150μV
- Slew Rate :
- 0.004V/µs
- Unity Gain BW-Nom :
- 10 kHz
- Number of Channels :
- 1 Channel
- Operating Supply Voltage :
- 5.5 V
- Supply Voltage Limit-Max :
- 7V
- Number of Functions :
- 1
- Mount :
- Surface Mount
- Number of Terminations :
- 8
- Low-Bias :
- yes
- Maximum Operating Temperature :
- + 125 C
- JESD-609 Code :
- e3
- Output Type :
- Rail-to-Rail
- Nominal Supply Current :
- 900nA
- Micropower :
- yes
- Series :
- --
- Voltage Gain :
- 115dB
- RoHS :
- Details
- Operating Supply Current :
- 900nA
- Supplier Package :
- DFN EP
- Terminal Position :
- Dual
- ECCN Code :
- EAR99
- Reach Compliance Code :
- Compliant
- Common Mode Rejection Ratio :
- 70 dB
- Package / Case :
- 8-VFDFN Exposed Pad
- Average Bias Current-Max (IIB) :
- 0.0001 µA
- Current - Supply :
- 900nA
- Output Current :
- 23mA
- Mounting Style :
- SMD/SMT
- Supplier Device Package :
- 8-DFN (2x3)
- Minimum Operating Temperature :
- - 40 C
- Mounting Type :
- Surface Mount
- Programmable Power :
- No
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Amplifier Type :
- GENERAL PURPOSE
- Voltage Gain dB :
- 115 dB
- Number of Channels per Chip :
- 1
- Factory Lead Time :
- 6 Weeks
- Wideband :
- No
- Supply Current-Max :
- 1.35 mA
- Surface Mount :
- yes
- Qualification Status :
- Not Qualified
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Base Product Number :
- MCP6033
- HTS Code :
- 8542.33.00.01
- Manufacturer :
- Microchip
- Bias Current-Max (IIB) @25C :
- 0.0001 µA
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V
- Number of Terminals :
- 8
- Package Shape :
- RECTANGULAR
- Packaging :
- Tape and Reel (TR)
- JESD-30 Code :
- R-PDSO-N8
- Shutdown :
- No Shutdown
- Voltage Gain-Min :
- 56200
- Terminal Form :
- NO LEAD
- Seated Height-Max :
- 1 mm
- Frequency Compensation :
- yes
- Product :
- Precision Amplifiers
- Operating Temperature :
- -40°C~125°C
- Base Part Number :
- MCP6033
- Length :
- 3mm
- Pin Count :
- 8
- Power Supplies :
- 2/5V
- Radiation Hardening :
- No
- Current - Input Bias :
- 1pA
- Power :
- No
- Published :
- 2008
- Height :
- 0.88 mm
- Product Category :
- Precision Amplifiers
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- RoHS Status :
- ROHS3 Compliant
- Voltage - Input Offset :
- 150μV
- Package :
- Tape and Reel (TR)
- Low-Offset :
- yes
- Temperature Grade :
- Automotive
- Product Type :
- Precision Amplifiers
- Product Status :
- Active
- Input Offset Voltage-Max :
- 150 µV
- Width :
- 3 mm
- Number of Circuits :
- 1
- Terminal Pitch :
- 0.5mm
- Maximum Operating Supply Voltage :
- 5.5 V
- Mounting :
- Surface Mount
- Supply Voltage :
- 3V
- Number of Pins :
- 8
- Brand :
- Microchip Technology
- Number of Elements :
- 1
- Gain Bandwidth Product :
- 10kHz
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Datasheets
- MCP6033T-E/MC

1 Channel Channels 23mA per Channel 1pA 70 dB Instrumentational OP Amps 0.0001 µA 5.5 V 1.8V~5.5V MCP6033 8 Pins 8-VFDFN Exposed Pad
MCP6033T-E/MC Overview
Packaging for the buffer amplifier is in the form of a 8-VFDFN Exposed Pad case. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 150μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 900nA , this buffer op amp will be able to operate. Keeping the voltage gain at 115dB is the best course of action. The buffer amp consists of 1 circuits in total. 1 Channel channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. A total of 1 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. A supply of 900nA or higher is recommended for use with this electronic part. The -- stands for the buffer op amp's serial number. There are a maximum of 56200 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. The buffer op amp has 8 terminals that can be used for connecting wires to the amplifier.
MCP6033T-E/MC Features
8 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6033T-E/MC Applications
There are a lot of Microchip Technology
MCP6033T-E/MC Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















